This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
MennoVanGrinsven
About
- Username
- MennoVanGrinsven
- Joined
- -
- Visits
- 1,010
- Last Active
- Roles
- Member
Comments
-
@ingmar see above
-
Ok with version 1.5 of the owntracks coming up, the following: Up to now using topics was the main way of identifying users. This is no longer the case. The owntracks app listens to all topcis that begin with owntracks. For MQTT users, the username …
-
RickDoorakkers said: I got the same issue with fences. Homey is receiving messages with waypoint information but the list with fences stays empty. I'm using the iOS app so maybe that could be the problem? I don't have a iPhone, so I ca…
-
Jerryvdv said: Similar issues here.. i.e. battery (from Android) is reported, however not from iOS. Leaving/arriving in home fence not working on android and not on iOS. Leaving/entering work fence works 1 in 5 times for iOS, never on Android…
-
Deef_K said: @LJSVV No not at all. Eventually i gave up and started crying. Today i noticed a update of the client. Did that help for you? Did you check if you have 'share' enabled in your regions? If you did not, the geofence is not …
-
@Deef_K I think you need to have a look at the authorizations in the MQTT broker. The users should be granted read/write to owntracks/#
-
Deef_K said: MennoVanGrinsven said: Deef_K said: I did create the users in the broker and loggin in with these accounts. Battery status etc. is not beeing updated. If you remove all the user data from the homey app an…
-
ingmar said: MennoVanGrinsven said: @ingmar Are you still using owntracks? Would you consider updating the guide with the latest changes? Hi, I am sorry I didn't follow this thread for a while. I am still using the owntracks.…
-
Deef_K said: I did create the users in the broker and loggin in with these accounts. Battery status etc. is not beeing updated. If you remove all the user data from the homey app and let the owntracks phone app send a location message,…
-
Deef_K said: J@MennoVanGrinsven ive added the users but the admin is simply beeing added by the system. Did you create the users on the MQTT broker and are you logging in with the phone apps with those accounts? According to the Scree…
-
@ingmar Are you still using owntracks? Would you consider updating the guide with the latest changes?
-
Deef_K said: Ive done everything from page 1. The userID is the admin login from my synology nas. Added 2 users as said but nothing happens. I use the same name as the deviceid and this is my flow. i added the extra lines in the mo…
-
Deef_K said: Ive made an user called Dave. It's the same as the ID of owntracks but its not receiving the status of my mobile. If you go to settings of the homey app, are there coordinates and battery level behind your username? Or c…
-
Deef_K said: When setting up a flow my geofences do not show instead it shows a "all geofences wildcard". Also i cant save the flow because Thuis is not beeing recongnized. Any idea how to solve this? Go to settings and add the users …
-
gldrenthe89 said: What do i add in the Owntracks Client (Homey) I can't find a good tutorial of CloudMQTT with Homey Owntracks and the iOS app. Not even on google. The data you have to enter in the client is written in the tutorial. T…
-
@Tallguy The problem you have has to do with the accuracy of your GPS. The "check for double events" will not solve that problem. That option solves the problem that when the gps accuracy is too low and gets out of range (the value specified in the…
-
Tallguy said: Is Owntracks also useable in a 'current location' flow? I mean...just like the Presence detection had the ability to use cards like "if some is at home..." Since Owntracks works so much better than any presence detection I've tri…
-
Tallguy said: Is Owntracks also useable in a 'current location' flow? I mean...just like the Presence detection had the ability to use cards like "if some is at home..." Since Owntracks works so much better than any presence detection I've tri…
-
WARNING Do not update to the latest mosquitto broker if you depend on the correct working of the owntracks app. Mosquitto has patched a security issue and as a result the mosquitto broker thinks the owntracks app on your phone is a malicious client…
-
Homey_Lampje said: Tested 1.0.1, no crashes anymore. Hmm that really does not work as intended does it. Does it still have this problem on the latest version?
-
MennoVanGrinsven said: Homey_Lampje said: @MennoVanGrinsven yes I do. Well have to check, but a self signed certificate is not supported. OK I have submitted a version to the beta channel with support for self-signed cer…
-
Currently there is a new version in the beta channel. The owntracks app has been redesigned internally and the following functional changes have been added: - owntracks/# topic is added by default. - Voice capability added (NL / EN). You can ask "…
-
Homey_Lampje said: @MennoVanGrinsven yes I do. Well have to check, but a self signed certificate is not supported.
-
Currently there is a new version in the beta channel. The owntracks app has been redesigned internally and the following functional changes have been added: - owntracks/# topic is added by default. - Voice capability added (NL / EN). You can ask "…
-
PimBliek said: I have everything set up but the events do not trigger the flow.... This packet is sent with Owntracks to the broker: {"_type":"transition","tid":"pb","acc":50.22695,"desc":"home","event":"leave","lat":XXX,"lon":…
-
viktor said: @MennoVanGrinsven No problem, i can make a cli install also tonight at home. Tnx Can you check if you have sharing enabled in your fence definitions? If that is not enabled, the name of the fence will not be included. In…
-
viktor said: Yes, i have always "state.fence = undefined" You just might have found a bug Because it should be set. Will have a look at the code tonight after work. Are you willing to use a beta version? Because I rewrote the app,…
-
viktor said: Hi @MennoVanGrinsven Not yet, after the second log i have the transition. But my flows are not running. Restarted the App and Phone, nothing. Tnx 20170411-06:50:32 Trigger enter card for undefined 20170411-06:50:32 Trigge…
-
@viktor so it is working for you now after you changed the accuracy. Seems so according to your added log.
-
Yannick said: I found the problem and my beacon detection is now working properly. The reason was that I had the wrong UUID. My device apparently has 2 UUID's. 1 for configuration and for the iBeacon function. PimBliek said: It…