This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
MarcoF
About
- Username
- MarcoF
- Joined
- -
- Visits
- 1,572
- Last Active
- Roles
- Member
Comments
-
Fire69 said: ZperX said: MarcoF said: @ZperX Are you familiar with Slack and did you do some research on how Z-Wave mesh networks work? Thank you for your kind comment. I don`t know why this comment. I can`t have mesh …
-
ZperX said: Back to the topic: why ZW+ has smaller range than normal ZW when it should have wider range? Non mesh connection to emphasize it before I get an other undeserved slap. Z-Wave = Mesh! A Mesh only based on battery powered node …
-
Fire69 said: MarcoF said: @BasVanDenBosch ; ------------------------------------------ please read on how "to build" a stable Z-Wave nmesh network and/or how Z-Wave networks work:http://blog.smartthings.com/iot101/a-guide-to-wireles…
-
My Vera3 Z-Wave network is rock solid! Yes I sometimes need to repair some node because I moved them, but its working. Also people are complaining a lot on Homey and Z-Wave, but the have no ..... clue how its working and/or how to build a proper …
-
@BasVanDenBosch ; ------------------------------------------ please read on how "to build" a stable Z-Wave nmesh network and/or how Z-Wave networks work:http://blog.smartthings.com/iot101/a-guide-to-wireless-range-repeaters/ Probably the main cau…
-
@ZperX Are you familiar with Slack and did you do some research on how Z-Wave mesh networks work?
-
BasVanDenBosch said: https://forum.athom.com/discussion/1942/welcome-to-the-forum#latest I this point: 3. Search for your topic ideas on the forum to see if somebody else already mentioned it somewhere;
-
Sjaakie33 said: will homey being able upgrade z-wave device in the future. like https://aeotec.freshdesk.com/support/solutions/articles/6000036562-how-do-i-upgrade-the-firmware-for-multisensor-6- Do you know what the future brings? Ath…
-
@DaneeDeKruyff
-
Upgraded all 8 BT modules to Z-Wave nodes. Very curious to the first experiences with the BT mesh of Move.
-
@Jon ; Thanx and your welcome! Most of the credits go to @JeroenVollenbrock! ; Athom, as far as I know, still didn't confirmed it as a official bug. Lets wait on the next big mighty awesome rocksolid update and hopefully it fixes this (probably) …
-
DaneeDeKruyff said: And here are the result of the Jury: UX sucks because it doesn't give the desired result Based on the most recent app? And what did you test?
-
Jon said: Oh, and what do you exactly mean with 'wake up the node'. Press the little button on the sensor? Yes hit the small button and within a sec hit save in homey. You should see a message it's save successful. If the device isn't…
-
Your last post in that topic is from 9 September and Athom released a new app the 10th. So please check the installed aeotec app on your homey is the same version as the current one in the store. If that's the case, check the parameters. Best it t…
-
Hi @Jon, could you quote yourself? Can't find the part about the new app. I also asked for a photo of the label, it can contain very valuable info which can look like garbage for others, such as firmware version, Release date/version, etc. I'm try…
-
Eternity said: Motion was not detected initially - all other parameters were - but now it is... In Insights all parameters are shown, except motion. I will give it some days to see if this solves itself :-) Have you checked the configura…
-
Jon said: MarcoF said: @Jon Did you compare the A-B-C versions? Not sure. I'm not a z-wave technical expert, nor do I see the A-B-C versions in the link. The info in the links does not say much to me. The only thing I'd really …
-
@Jon Did you compare the A-B-C versions?
-
Known issue with all zwave drivers. Its something Athom came up with and not my fault. You need to download the driver and copy it into the node modules folder.
-
@TinCup ; I prepared you a zip file(see attachment) with (check for the second time) all driver enable debug "debug: true". Please try to run the file at the NodeJS console with this command "athom project --run". For more instruction read this topi…
-
@baskiers ; Just did some range testing and it looks like the range is, with 12m into the backyard (through 2 stone/concrete walls) excellent! Also at around 1,2m Homey triggers when I push the "ACDB-6600" button. Probably the way of pairing is th…
-
Included with the sensor? Are there different (hardware)versions of this device? If I understand it right, the Z-Wave driver handles all the (string)numbers/integers as is. The parser is only need to do magical conversion and also then the Parser i…
-
I found this manual: https://support.smartthings.com/hc/en-us/article_attachments/205315906/aeotec-z-wave-multisensor-6_manual.pdf Its the first result when searching on; "aeotec motion sensor 6 zw100 manual" Also the parser Issue on Git could be…
-
KeepT said: No @MarcoF , that ticket is indeed about a NEXA doorbell, but it has the EXACT issue that is described in the bugreport: Paring for KAKU and NEXA works fine, and initially the doorbell works fine. However, after a while (trigger un…
-
Here the doorbell isn't working, but my other (battery powered) KaKu devices are working great. I use KaKu remotes to trigger Hue scenes, TV on/off, etc. etc. Working great. So KaKu/433 receiving works and triggers also work Also my Elro and(!) …
-
Just had a look at the code of the App and there seems to be a bug in it...... The manual says: And if you want to report all of the sensors, you would add the whole table together and set the sum (227) to parameter 101, 102, or 103. …
-
@2Be good points! Speech is going over multiple layers (mics, speech2text services, Homey software, IVONA for playback, etc). Athom is using several Speech services and experimenting with Google's service(s). https://forum.athom.com/discussion/co…
-
ZperX said: How do you know it is the same engine? Why should it be different? Why using and maintaining 2 engines ? I have no source in the way of a forum/slack post, but if i'm right Athom stated the app and Homey use the same engine. …
-
KeepT said: @arthur27. Doorbell not working is a bug: https://github.com/athombv/homey/issues/831 Z-Wave not working is also a bug...... That ticket is about a NEXA doorbell which the issue maker is trying to pair with the KaKu app. N…
-
@Jon I really have no idea! Z-Wave is still a bit buggy and yesterday Jeroen created this issue; https://github.com/athombv/com.aeotec/issues/7 So maybe its better to just wait.....