This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
MarcoF
About
- Username
- MarcoF
- Joined
- -
- Visits
- 1,572
- Last Active
- Roles
- Member
Comments
-
@thayoung1 Please be careful with these movies. We have seen movies of Homey with perfect speech, KaKu indoor ranges of 30m+ through thick concrete walls, read stories about perfectly working presences detection, brilliantly working IR, etc So p…
-
blusser said: @MarcoF it seemed that my zwave network was a little bit busy but it works! thanks a lot! Great!
-
@blusser; Is the doorsensor already working?
-
Parameters should be saved, but not on pairing. Some more info to Robin's posts; Its up to the developer of the App to make the App in that way the user knows what to do with the settings. In the ideal world, the App developer defines the perfect d…
-
BasVanDenBosch said: https://forum.athom.com/discussion/comment/20456/#Comment_20456 Damn your are quick and a very good find on the forum
-
There's a very nasty bug in the default settings saving part on pairing. The idea is that after pairing the default settings of the app are saved in the Node. Unfortunately the nasty bug is preventing this and the device is working as designed by th…
-
Will see what i can do tomorrow with the ~1m But why is the UX between the 2 pairing sessions resulting in different behavior? In the end the doorbell is paired and the "doorbell pressed" card is available, but the chosen pairing-path determines i…
-
WHEN triggercard Luminance for Motion Sensor change AND Lux is less then XXX THEN lights on
-
Jon said: hi @MarcoF It's the multisensor 6 (latest generation). OK, thats a Athom driver (which should not make a big difference) Don't know how the Sensor6 is working with pairing, but the older motion sensor is OK with a short push …
-
hmmm, here the same doorbell. After reading this post, I realized that it here also might be broken. Just tested it and here he's also dead. Did some testing with pairing; First I tried to pair with "generating signal" and in this way Homey receive…
-
Which sensor(type/number/etc) are you trying to pair?
-
T-mo-T said: When will the presence/home detection be refactored in the Android app? It's not working really well at the moment (or I'm just a sleepwalker leaving the house a few times each night...?) +1 Also widget and/or lockscreen …
-
Running debug is always a good idea! Your previous debug showed: [debug] node.CommandClass['COMMAND_CLASS_BASIC'].on('report') arguments: { '0': { value: 1, name: 'BASIC_SET' }, '1': { 'Value (Raw)': , Value: 0 }, '2': null } [debug] node.…
-
you need to set "te versturen commando" on "16"
-
@blusser ; Please check the config of the device and make sure the report type is set to use "binary report".
-
Annemarie said: @caseda expect around Homey 1.0.0 2.0 can feel like 1.0 https://athomcommunity.slack.com/archives/general/p1472217743008420 Expect nothing
-
@MartijnDeRhoter Sounds like a open door to me
-
blusser said: @MarcoF, Thanks, will take a look ASAP! btw, this is my first attempt to install a app outside the appstore so probably I have to figure out some things. OK! Basicly its; * download the zip, * extract the zip * navigate…
-
@blusser ;; Had a quick look at the config settings of your DSB54 and the already supported ZW096 and the share all settings. So I added the productId of the DSB54 to the ZW089 driver. Also did a minor change on the default value of parameter 121 (w…
-
Not yet.... "busy" weekend.... First my other drivers need to be working properly, then my own modules are first priority, then other modules Maybe next week I have some time for that sensor. For people with the Aeotec/Aeon Labs Smart Switch ZW07…
-
evad said: @MarcoF ; Luminance is working now. Thanks You're welcome! Now working on the ZW075 Smart Switch node. Looks like a direct copy of the ZW096 which Athom wrote
-
Its more like, the all work or the all not working. If its not working, then the value is "-" and because it says "0.00" Homey received some data. Did you try to move the sensor to a lights area, for example directly under a light?
-
Your welcome Could you post screenshots of your nodes configuration? This is my config which work OK for now:
-
@nitehawk Here it is
-
@cautje; Thats a really nasty one! It's creating a very bad noise and as a result a very bad UX. Users think there Node is configured correctly because of the default settings. I expected a Hotfix for this issue, but unfortunately it didn't happen.
-
nitehawk said: I'll try putting the sensor close to homey and let you know the result. Yes i'm able to run the app in the Node console in debug mode, the screenshot in my earlier post is from the debug output in node. Great, didn't r…
-
@nitehawk I also had some issues with Motion and think I solved it. Please try placing the sensor next to your Homey for a couple of hours and see if the other values show up. There are indeed big difference in UX with Z-Wave. The drivers are writ…
-
@nitehawk That's "my driver". What's the issue? Which capabilities are not working? Whats the distance between Homey and the sensor?
-
jvreede said: aeotec Multisensor 6 Aha that's not my driver
-
@above: Which sensor is this? My Homey's Z-Wave chip is busy for more then 30min. now so testing/devving is not really possible. Z-Wave still busy and 3 reboot for this day because of Z-Wave busy.