This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
MarcoF
About
- Username
- MarcoF
- Joined
- -
- Visits
- 1,572
- Last Active
- Roles
- Member
Comments
-
RobinVanKekem said: Isn't Homey able to receive Bluetooth beacon signals? Homey has the BT antenne, unfortunately BT isn't released yet. BT is a standard, so if Athom is following that standard (which I expect ) then Homey should be abl…
-
SdR said: I have the FGR-222 roller shutter, how can i do this now? or do i need to wait for a new updated Fibaro App? waiting on the new app in the app-store is the best way to go I expect a new app approval round monday
-
O and please continue this in the Aeotec topic: https://forum.athom.com/discussion/1903/app-aeotec#latest
-
evad said: None of my battery operated z-wave smoke, door and movement sensors show any data. I already did a compleet whipe, restart pair and unpair. Still no data. Sensors are working fine with vera controller. Need some advice Here…
-
@cautje Is the sensor placed in a situation where there's constant movement? Also check all parameters with the manual to see if, for example, the "movement/tamper off" changes are send. I know, because of the philio development, not all sensor aut…
-
ErikVanDongen said: I upgraded to the z-wave version for my 3 ordered MOVEs. So another year to wait. Change my order of 8 to zwave, very curious how it will continue.
-
I like the NEEO app
-
Which device do you try to pair? [edit] Nevermind. Here's a zip with(!) Z-Wave driver and(!) all device drivers with debug enabled. Unzip the file, go to the unzip folder and run "athom project --run" Try to pair the device and about 1 min. after…
-
Controlling your car with Homey?
-
New app is published. The app now supports; * Philio Slim Multi-Sensor PSM02 4:1 * Philio Slim Multi-Sensor PST02-A 3:1
-
DieterKoblenz said: After today there are still 4 Friday's left in September You kidding me?! Sh*t
-
JurgenHuijbregts said: Yes for the mesh network to be setup correctly Pairing a device at <50cm of Homey has nothing to do with Mesh. Pairing at <50cm is 1:1 communication between device to pair and Homey.
-
JurgenHuijbregts said: Did you w8 about 30 min before inserting new Zwave devices?? Wait 30min. to add new Z-Wave devices??
-
JurgenHuijbregts said: well, yust checking... Its September, so next Shipment and Stable release!!! https://athomcommunity.slack.com/archives/general/p1472216600008404
-
TinCup said: Robin said: The productId matches. But this is not proof that your device has that same productId, only way to find that out is by running the app via command line with debug mode enabled. I can't find how to enable…
-
blusser said: Can support for the recessed door sensor (non zwave+) be added as well ? please find attached the console output when adding the sensor thanks If I have some time in the upcoming days, then I will give it a try. [edit] Co…
-
The new app isn't supporting the widely spread/used and (in)famous DSB05 4:1 motion sensor and so I create a driver for it. The pull request is here and now its waiting on the merge and new app version. https://github.com/athombv/com.aeotec/pull…
-
@jovink Added the PST02-A sensor to the app, could you download the source from Git and run the Debug for me and see if everything is working? Click here to download the app source
-
Found some more info; 0x71 Alarm/Notification The Alarm command class was renamed to Notification in version 3. Used by sensors and other devices to report events. Will see where this boat is will strand.
-
Almost done with the Philio PST02-A driver, but i'm stuck on the point of "Notification Reports / Binary Sensor Reports". Don't know the differences and/or benefits of the reports so don't know which report to use for this sensor. If somebody know…
-
Thanx! Going to work on it, no idea when its done
-
hmmm that's a pity. I can try to add the device to the App. Could you send me the Console info right after you paired the device with Homey? For more info and example this posts of Caseda and nicor: https://forum.athom.com/discussion/comment/3018…
-
@Eternity Please be patience and give Athom some time for the Z-Wave 2.0 rewrite !
-
Nice! Let me know your findings
-
MarcelTimmermans said: How can you make a trigger half an hour before sunset? There's no FlowCard to do that with. The only way to do it, is the way @KoenMartens describes. In the pas there was a FlowCard for this, but it vanished when …
-
And everybody can call me crazy, my Homey again "died" and/or is not responding.... Thinking Cleaner module is WiFi and reachable, Homey is not responding and the NodeJS Athom Cli lost connection with Homey; And he's back..... Loadavg: [2.2495…
-
@KoenMartens ;;; Please men..... My post was to explain how Athom does thing and a lot of people lose track of that. And please also read my helpful forum/slack posts and check the App-store for my apps/Z-wave drivers contributions! And to you; T…
-
stable, beta, alpha, experimental.... Losing it..... LoL Lets see; Homey's Firmware is currently in Beta branch [Beta] Here we have two flavours; Stable, Experimental, so; [Beta][Stable] [Beta][Experimental] After that we may expect a Stable branc…
-
I had IR devices installed/paired, after the 0.9.2 update the were gone and I didn't ask for it. As mentioned before; There were people where IR was working and the are blind now.
-
It was not really one time. IR devices are also "kindly" removed for us(still very fun to see that Athom can do that for us) and we may add them after re-enabling IR again. The same for the 433 [deprecated] devices. Its Beta......................…