This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Eternity
About
- Username
- Eternity
- Joined
- Visits
- 4,331
- Last Active
- Roles
- Member
Comments
-
In the Eurotronic thread you can read that you are not the only one with this issue. A Github case was created some months ago. If the standard way of removing unknown nodes fails, seems you are stuck with them. In my case I had a dozen of them. I…
-
Try to drop the tag from the tag drop down menu onto the volume. See my example, the blue tags are dropped onto the card.
-
Reset the device first, than try to include again. I'd I remember right, reset by long pressing the include button. Good luck.
-
Did you check the bios? For bios access, you need to press all 3 Homey feet whilst soft booting!
-
Nice to read @angr !
-
No...the cubes rotation does effect dimming, but it is not stable. I guess the delay is to big to work correctly with Hue.
-
Hope I can help you... How: - use Better Logic to create a num variable - Add the dim slider as a device in Homey - create a flow that looks like this, but your hifi/volume device in the THAN: Add the slider to Homey Dash: Good luck! …
-
Note to Self After an OFF state of the valve, it can take an hour before the Spirit reports the correct actual temperature, even if woken up via a temperature/setting change via Homey or the Spirit itself:
-
Perhaps try under CP/M? You might need to find the correct z-wave driver. Those days it was called New Wave. Perhaps also try The Fixx. Good luck!
-
Don't have a working solution, but was think of a way to help you. First, I use (usb powered !) Aeotec Sensor 6 sensors which have the following setting options: It states that it will only update humidity if this exceeds a certain threshold in…
-
Today I came home to find my office steaming hot. Two Spirit's control the temperature, they were set to 20 and 19,5 degrees, but its was over 28 degrees and both radiators where still giving heat. My office is faced North, it was not a sunny day a…
-
Dear Cube owners, Slowly I am befriending the Cube. Flipping and tapping are clear to me now. Blush blush... Next are the rotation and moving... Moving the Cube The trigger card has 3 labels (Target face, Source face and Cube Beweging (Englis…
-
@TedTolboom Haha...no wonder it didn't work... Thanks!
-
Been playing with the cube. Nice! Have a hard time getting the '2 x kloppen' to work. How fast do you need to knock the cube. And is it a mild tap of do you have to knock it hard?
-
@DaneeDeKruyff I want to compliment you. Not only have you created a great Homey App, you are always present to help users, patient and helpful. Thank you!
-
Thanks!
-
TedTolboom said: What is the best practice for you guys? Press the link button on every second until inclusion has been completed? I’ll post the “formal” inclusion instructions from Xiaomi when I’m home.. What worked for me: - make sure t…
-
For what reason does the option exist to sent the outside temperature to the Spirit?
-
@RuudvB This is driving me (even more) nuts... My 4 doorsensors paired with the first attempt, the cube is a bit tricky.. UPDATE Working... after a Brazilian attempts :-)
-
Thank you!
-
Julian said: ... you should not do a long press but just press the link button (not the power button) repeatedly untill it is fully paired (and that did the trick, working fine now!!). I see a link button, inside the Cube. That is …
-
Phaeton said: ... I used the nsa logger. @Phaeton Which logger did you use?
-
Need help pairing Cube. In the pairing process, I get to the stage where it says 'Apparaat wordt toegevoegd ' but than it times out with 'geen apparaat toegevoegd. I do press the link button every 1 or 2 seconds to keep the Cube alive. Tried 4…
-
I posted a Github issue, but now I am not sure if I should have posted it here... Unfortunately, I have problems sending a SET TEMP to my Spirit vales: It is more hit and miss; sometimes it works and sometimes it fails. More details are in the …
-
@jtigchelaar Mocht je er nog vragen over hebben, wellicht kan ik je verder helpen. Het is mij inmiddels gelukt om zone verwarming te regelen, zonder gebruik van een boiler schakelaar. Door een serie flows en een extra powerplug op de vloerverwarm…
-
@GeurtDijker Found another small issue, but not sure if this is caused by your App, or the Homey beta Android App. If I use the beta Homey App, I can't clear the log. Pressing the button doesn't clear it.
-
It would be 'nice to have', not 'need to have'. So, only if you have spare time...
-
Hier een aardig stuk om te lezen: www.robbshop.nl/domotica/z-wave-projecten/z-wave-zoneverwarming-deel-1 en www.robbshop.nl/hoe-werkt-een-multizone-verwarming-systeem-op-basis-van-z-wave-home-automation
-
I too use B&S devices and would love to see a Homey integration. Bear in mind that B&S has two different sets of devices; operating on 868,x MHz and 433,x Mhz. So that is the first hurdle... 14 months ago I contacted the Dutch developer of …
-
Perhaps I am over looking this; I have my flows organised in folders. If Papertrails add's a card with the Flow name, I still have to find the corresponding folder. Is it possible to extend the option "Flow Management | Add to the log" with the flow…