This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
CyberSponk
About
- Username
- CyberSponk
- Joined
- Visits
- 1,354
- Last Active
- Roles
- Member
Comments
-
Thank you, too.
-
Could anyone explain what is todo to get the Nuki-State back into Homey? Read here often "Callback-Url" > Where will this be entered? Got on a Nuki-Device in Homey only Ip, Port and Token. Edit/Update: Get it with Posts on this Topic on Page 5 a…
-
Changed the Price for this Offer: 10 of Philio PST02-1A 4-1 > all 10 for 100,00 EUR, 2 of Philio PAT02-1B 2-1 > all 2 for 25,00 EUR or all 12 together for 115,00 EUR
-
@viix Made the Scene-Names included the Room e.g "Kitchen Bright" in Hue-App on the Phone. Works for me.
-
Yep, for me it works again too: Made the procedere for adding a new Netatmo-Base-Station and during this the Netatmo-LogIn-Page was shown. Entered my Account-Information and restarted the Netatmo-App. Done. Used Chrome (PopUp-Blocker disabled du…
-
@jorden Thanks.
-
Hi, could anyone explain me the difference between then "Then-Cards" for e.g. Lock: Card "Lock" and Card "Perform a lock peration" with the selection "Lock" Thanks. Nick.
-
It's a known issue: https://github.com/athombv/com.aeotec/issues/96
-
Phaeton said: I have investigated my zwave network. I found two fibaro switches which where updating the energy status multiple times/second. Settings seemed right. I resetted the devices and now they stopped doing it. Hope this helps. But the …
-
@Towanda You wrote: changed lumen value change to report to 5000. What was the Value before you changed it?
-
Since 1.5.6-RC13 Tamper-Alarm exists and could not stopped/deleted. Reported on Git: https://github.com/Inversion-NL/com.philio/issues
-
Undertaker said: very bad update. Zigbee almost does not work anymore, zwave has big problems with the Fibaro components.I will soon be tired. Not only Fibaro-Devices, also Philio Motion Sensors (Reported on Git).
-
@anne Only seen on the Owm-Page that they have this Information and missed them in you App ;-).
-
Sunrise and Sunset (shown on OpenWeather-Webpage) not included. Could this be done so that these values can used on Homey?
-
Updated to 1.5.6-RC6. Process took round about 30 Minutes. All seem s fine at the moment.
-
elgar said: Signed up for the iOS beta right after the beta announcement but still no invitation. Would really like to test the beta and provide feedback. Are there more people still waiting for an invite? Yes, but didn't need the invita…
-
Got the same with Tamper-Alarm. Best way (got more) to delete Tamper-Alarm: Ptp Homey after 24h when Tamper-Alarm goes On for more than 20 Minutes and Tamper-Alarm is gone.
-
You (@Amelsfort) can handle this with a Number-Variable. For example BitFlip-Device On you need: BitFlip-Device (Boolean) Variable (Number) You also need two Flows: One Flow for the BitFlip-Device and a second Flow for doing things that Homey sho…
-
With Homey 1.5.2 and Aeotec 1.6.0 the Problem after Reboot (Switch shown Off) is not longer given > SmartSwitch5 works fine.
-
Try to install as full Administrator: Move Mouse over Install-File, Right-Klick, Run as Administrator. If an error occured please report here. If successfull please report also here.
-
@Wijnie After Factoty-Reset try Including. You Wrote: "First I open the device in the philio app and than i put the battery in the device." You see the Homey-Including-Page after open Device in Philio-App? Also look that the Device is near Homey w…
-
@Wijnie Factory-Reset Philio PST02: * Pressing tamper key four times within 1.5 seconds and do not release the tamper key in the 4th pressed, and the LED will light ON. …
-
@Wijnie One more: How you started including? First Battery on Philio In/Out and then the part on Homey?
-
@Wijnie Was the Philio a new Device? Tryed with one or more Devices? Did you made a Factory-Reset on Philio?
-
@Wijnie Looked this moment on my Homey > The PST02-A is listed as 4th Device in the 1st row. The first Device is shown without Mouse-Over as Slim-Multi-S... then Outdoor Mot... then Smart Color... and than the Slim-Multi S... wich is on Mous…
-
@Wijnie Your Homey has an installed Philio-App and the App is listed under Settings > Apps? You're going on your Homey to Devices, Tab + for a new Device, select there Philio > What for Devices could be select there?
-
@Wijnie Is it included in Homey or didn't find Homey the Device while you try to enclude them? You wrote "... is not found ...".
-
Devolo-Sensor is a labeled Philio-Sensor. If there is no Option in Device-Settings you can try to set the Parameter 2 and 4 (both 1 Byte) to 0 in the Device-Settings > Raw Configuration Parameter. Put following into the field: 2,1,0;4,1,0; an…
-
Outdoor > Aeotec Multisensor 6. https://aeotec.com/z-wave-sensor > When installed in a waterproof & anti-condensation enclosure, you can use MultiSensor 6’s non-motion sensors outdoors.
-
@bvdbos Yes. It was gone (posted 01.06.17 after App-Update) but since 1.5.3-rc8 wrote on 25.08.17 the problem/issue is back. Got this only witch Switch5 after reboot Homey. Seems similar also on Switch6: https://github.com/athombv/com.aeotec/issues…