This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Leeuw1960
About
- Username
- Leeuw1960
- Joined
- Visits
- 2,429
- Last Active
- Roles
- Member
Comments
-
Rocodamelshe said: And what if the plug died? Best way to find out is to remove it from Homey and re-add it. I removed it en readdited it and than it works. Sadley you must change the flows ?
-
rickp said: Sounds like; https://forum.athom.com/discussion/5318/problem-removing-z-wave-device#latest i think i have no problem with removing te plug and reading te plug but then i must check my flows en ad the new plug. and that not …
-
phil_s said: take the pug and plug it near to homey and wait if it wll respond again. then you know that it was to far from homey placed and you have to take another plug to make a bigger zwave mesh and reach more devices it was already…
-
@Bram is it possible to see a few screenshots from the new app while waiting for the release to keep us motivated
-
stil 3 hour and counting
-
-
i want to check de difference between the outdoor temperature en the indoor temperature en on that result switch on the ventilation or off. for instance outdoor temp < indoor temp . i tried it with better logic what not worked or i did something …
-
Leeuw1960 said: GeurtDijker said: Montoring on: Place All sensors in one Zone: Create one Flow GeurtDijker zich flow app doe you use in the flow.? Found it your one natuaraly
-
GeurtDijker said: Montoring on: Place All sensors in one Zone: Create one Flow GeurtDijker zich flow app doe you use in the flow.?
-
koktail said: Leeuw1960 said: is it possible that i can see in the app when the data was update (day and time) You can see it in the device its configuration. (its not timezone related, so you need to add/subtract you timezone) …
-
is it possible that i can see in the app when the data was update (day and time)
-
JPe said: Zie ook de waarschuwing op https://github.com/Tristan79/miflora Bedankt voor de Info dat wist ik niet.
-
Updated and sofar no problems kaku is also working fine
-
jolerius said: Since updating to the newest beta app on Android I can now create and change flows. But flows created in the app doesn't run. Neither can I test already created flows, in the app. Something with the flows in the app isn't right.…
-
Lesley said: Upgraded tot (v2) 1.0 (101) iOS but since this morning, I can’t open the app anymore. Keeps crashing after half a second same problem here
-
gruijter_dev said: The app shows the actual speed, not the maximum speed. But when you do a speedtest you should see a spike in insights. Since the built-in netgear speedtest takes less than a minute, the actual speed you see in insights will b…
-
gruijter_dev said: @Leeuw1960 are we talking about the same speed? It measures the average speed from the past minute. If you watch a full hd video, do you not see the download speed going up to a few Mbit/s after a minute? Could you post a pic…
-
I am on the beta version V1.20 but still the down en upload speed is a little bit low in the app. My speed is also 0.03 en 0.01 en it should be more than 300 en 30 on my R7000
-
gruijter_dev said: Assuming you are on the stable version I can inform you that this is solved already in the beta version your assumption was wright and good to (hear) read
-
christian1976 said: Everything working except for up/down speed..... It varies a lot from the actual speed it only report 0.01 to 0.50 and with speedtest it is more than 150 mps. Is there somewhere i can adjust something ? :-) And thanks again…
-
Eternity said: I managed to get the Surveillance Station "Home Mode" to switch On/Off via a http GET command and presence. If anyone is interested I will post the details. I am interested
-
Works very nice. For me personal would it be nice to see a greater difference between on an off for instance red for off and green for on
-
Leeuw1960 said: In can not set The name from The widget buienradar ? It doesn't work on safari on my iPad en mac-mini with chrome on my mac-mini i can give the widget a name
-
In can not set The name from The widget buienradar ?
-
any news from the IOS app i signedup lastweek.?
-
What can i do whit this option ?
-
Leeuw1960 said: i use the app set a virtual switch on an appointment (i work at home) in my calendar. This is an recurring appointment. sometimes i move 1 appointment to an other day in my calendar. Only Homey uses still the old date to set the…
-
Ik weet niet zeker of het werkt maar ik denk dat je ook een vraag in een flow kan zetten en dat Homey dan vraagt welk kanaal moet ik opzetten en jij zegt dan het gewenste nummer.
-
i use the app set a virtual switch on an appointment (i work at home) in my calendar. This is an recurring appointment. sometimes i move 1 appointment to an other day in my calendar. Only Homey uses still the old date to set the switch. Is the app …
-
i have one fibaro powerplug Z-wave + that i dont see back in Homekit. others from the same type i see. Could it be because a told the one i cant see it is a fan.?