This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Arie_Laxed
About
- Username
- Arie_Laxed
- Joined
- Visits
- 186
- Last Active
- Roles
- Member
Comments
-
gijsje said: Would also be nice if there would be a virtual P1 and virtual selector switch Do you mean the P1 from the 'Slimme Meter'? What Capability(ies) would that use? Perhaps measure_power and measure_water? I guess we need a virtua…
-
quakerix said: Arie_Laxed said: All: Sorry for the late reply. In april I will spend some spare time on Homey. I'll start with bugs and look at the enhancements later. No promises, though @quakerix: I've added a new issue to add t…
-
Rijswijker said: Is it possible to add a KWh meter for energy measurement? The only thing i can do now is show the actual wattage, but not the total wattage in KWh. I've created an issue on Github: https://github.com/ArjanKranenburg/vir…
-
Alternatively you can use the "away"-device as trigger and set the card to 'pressed / changed'. Then you don't have to check the device-tag. Another alternative is perhaps to use the sunset or sun-up as trigger and check the away-state.
-
@erlandjack: I've investigated your request (https://github.com/ArjanKranenburg/virtual-devices/issues/48), but I simply don't get a trigger from Homey when a button is held down or released.
-
All: Sorry for the late reply. In april I will spend some spare time on Homey. I'll start with bugs and look at the enhancements later. No promises, though @quakerix: I've added a new issue to add that: https://github.com/ArjanKranenburg/virtua…
-
No problem. When adding the Virtual Thermostat, you can opt for a state 'Automatic / Heat / Cool / Off'. You can use the Thermostat pressed/changed card to trigger a flow, check the state-tag's value in the 'and'-column and turn on/off your heater i…
-
Unfortunately the only way to transfer values between apps and devices is via a flow. You can also set the target temperature with a flow, via the 'Set the temperature' action-card. Just drag the tag from better-logic over the temperature-control a…
-
Hi, The Target Temperature is set in a Tag. In a flow, you can use it in any other device or app that supports setting values, incl better logic.
-
Thanks. If there’s anything else, Let me know.
-
Also, I’ve added a few github-pages to explain some things of the VD-app: https://arjankranenburg.github.io/virtual-devices/sensor
-
@konradwalsh I just published 0.7.0 in the Beta-channel and hopefully it brings you a step further. You can add a Measure Temperature to a Virtual Device with class Thermostat. You have to add a new device, though. You can set the Measure Temperatur…
-
Hi Christer, I get these crash-reports by mail, without knowing who's Homey it was. Apparently the ones of the last days were yours. I'd advise you to upgrade to the 0.6.6 version. It is in beta but it is not less than the stable version and will b…
-
konradwalsh said: @Arie_Laxed & @TedTolboom Any progress to report.. We are well into the cold season here so its more needed now than ever Sorry, no progress. I took a small break since the last update to work on some other projec…
-
As a starting point, I've added a Thermostat to the Virtual Devices App (beta-release 0.6.6). For now, you can only set the target temperature and the thermostat mode. Next step is to add a sensor, but perhaps this may already be useful.
-
Oy1974 said: Hi arie, thanks for the fast response. But the part you subscribe i understand. Cant figure out how to use it in a flow. For example in the then colum there is a open field "status" no dropdown so can you give a examble how to use …
-
I agree that that part could be more user friendly, but perhaps this helps: First you select a name and an icon, just like with a 'normal' virtual device. Then you specify the modes. Specify a name and an icon and press ‘add mode to the list’. Y…
-
xAPPO said: Is a virtual dimmer being worked on ? Answering my own Q.. It appears the answer is yes along with the V2 API re-write ... many thanks looking forward to it ! It is included in the 0.6.5 release. It is in the beta-channel…
-
The idea behind a mode is to set your house in a state with one switch. E.g. when on Holiday, you may want to use different timers for the lights and radiators. Or movie can mean that the lights are dimmed and you're not disturbed by phone or doorbe…
-
Guilty, as well!
-
JPe said: @Arie_Laxed The status of the virtual devices like Away and Holyday are always set to OFF when the Homey software is updatet. This morning also again, I was afraid my holiday was over, but I could convince Homey, it's not, by settin…
-
Hi, Thanks for your remark. Since I'm doing this in my spare-time, I will not commit myself to a date. Today a new Homey version is/will be released, and I'm waiting a bit how that turns out. After that I will pick up some new features and since I'…
-
TedTolboom said: Arie_Laxed said: After upgrading to 1.5.0-rc, is it possible to go back to 1.3.1? The only option is a full reset to the stable release... what is the issue(s) you are running into? When I upgrade my Home…
-
TedTolboom said: posthok said: Is it possible to create a button or slider to change radio station?? I have several radio station on my chromecast all on a Klik aan Klik uit remote. But I also want to switch station from my mobile Home…
-
TedTolboom said: You triggered a though... Wouldn't it be nice if thoughts could be used in trigger-cards... ;-)
-
After upgrading to 1.5.0-rc, is it possible to go back to 1.3.1?
-
BartWijers said: He Arie, not sure of its the same problem as viktor had, but in the following flow the pressed/changed card is not triggered. I can solve it with two separate flows but this should work as wel right? If I trigger the flow manuall…
-
TedTolboom said: @Arie_Laxed I might be an option, but more complicated to implement, to give each mode a 'persistent' setting... if enabled, looping over the modes, should not turn these settings off one additional request, is it possible to…
-
keverjeroen said: Thanks for your reply. Is there a 'action-card' that I can use to disable all other modes? I could'nt find it.. No there is no action-card for 'all other' modes. I meant: for each other mode add an action-card to turn it…
-
keverjeroen said: Hi, I am looking for a way to disable all modes except one. In my situation, I don't want more than 1 modes active simultaneously. For example: IF: activate vacation mode THEN: disable all modes except vacation mode I guess…