This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Skorpion
About
- Username
- Skorpion
- Joined
- Visits
- 2,224
- Last Active
- Roles
- Member
Comments
-
How did you guys order the curtains and Aqara motor at Ali with shipping costs/taxes? A motor + tracks are easily 150-200 euro’s. Asking to put on 20 euro’s isn’t gonna cut it here I guess.
-
In my situation .11 was definitely an improvement.
-
5 to 15 minutes isn’t normal if you ask me. I can pair Xiaomi in less than 1-2 minutes depending of the device. I would advise to delete the Xiaomi Mi Zigbee app. Then pull Homey’s plug just be sure. If Homey is running again, then re-install the a…
-
I’m also a happy alpha user, and if needed, it will stay that way.
-
hassebassie said: Skorpion said: Using this flow now. Works perfect. Can you tell me how I can create the second logic with the blue label Vochtigheid? Thanx! You can find that tag in the tag menu in the flow editor a…
-
rtna said: Is there somewhere a database online with plants and tresholds for moisture, light etc? I used the Flower Care app for that on my iPhone.
-
koktail said: Skorpion said: Using this flow now. Works perfect. Do you know you can add a threshold in the device its configuration? Didn’t know that. Thx!
-
Using this flow now. Works perfect.
-
Received my first mi flora sensor today. Didn’t make any flows yet, but the pairing and the status updates of the device are working great @ 1.5.8. Thanks so far @koktail!
-
The problem with the hole Homey speech issue are the microphones in Homey itself. If you use the smartphone app, it does work for example. The processing isn’t the issue. The results is that integrating Alexa or Google assistant into Homey isn’t goi…
-
Livingcolors 1st gen can’t be paired with any system. However if you use Google, someone found a solution with arduino, but it won’t be easy by the looks of it. https://forum.mysensors.org/topic/4638/philips-livingcolors-mysensor-node
-
mbalik79 said: @Skorpion I did a reset on bridge today (button on the bottom), but still cannot find any hue light directly by homey? What can I do else...? Did you turn off and directly turn on the power of the specific light?
-
AFAIK most of the users (if not all) connect the xiaomi/aqara devices directly to Homey.
-
@mbalik79 A reset of the bridge has to be sufficient.
-
mbalik79 said: Is deleting the hue lamp from bridge in the android app enough to get it paired to homey directly. I tried it with a hue bloom, but can get it paired with homey. (Don't have a hue remote ) No, the light has to be reset al…
-
Wist je dat je het volume kan aanpassen bij de instellingen van de sirene? Did you know that you can change the volume in the device settings menu?
-
I have the idea that my z-wave network on RC11 is more stable and faster than it was on RC8.
-
As long as your tradfri are connected to Homey and your Hue lights are connected via your Hue bridge, the lights are on a different Zigbee network so they don’t extend the mesh. As Lubbert said, your Hue lights must be connected to Homey in stead of…
-
Updated yesterday in 15 minutes. Encountered no problems yet.
-
@McVit All hue lights should get reset when you reset the Hue bridge. I used the remote for one light because I didn’t want to reset my bridge because I would lose all my scenes that I use for the other lights that I don’t want to connect to Homey …
-
Tried to reset a hue bulb from my bridge this morning, with no succes at first.... After all it was very easy, and now I have my Hue bulb connected directly to Homey. I thought that a Lutron Hue remote was mandatory, but an old Lightlink remote …
-
I expected the worst when I was reading this topic, but just paired 2x E27 1000lm bulb, 4x E14 tunable bulb and 1x rotating dimmer without problems. (Homey FW 1.5.3)
-
I think this is a very weird discission looking at the fact that there isn’t a skill available at the moment that has the possibilities that this skill has. I hope that @Emile will reconsider because a lot of people including me were looking out for…
-
quakerix said: Skorpion said: quakerix said: Hey guys, I have a FGS-222 and the secondary switch isn't switching anymore. Physically or via the UI. I reported an issue: - https://github.com/athombv/com.fibaro/issues/181 I do…
-
Hi Menno, I didn't see an issue page on GitHub, so I will post it here. Everything is working fine for me, but I noticed a few Owntracks error messages in the notification tab, so I looked into the log. Maybe this can be fixed in an upcoming releas…
-
I didn't change anything, but when I left home, it worked, so problem solved.
-
MennoVanGrinsven said: Skorpion said: Thanks for the quick reply. Don't know how I easily can add new users on my RPi broker, so reverted to a previous version for now. Will it be possible to check on same user but different DeviceID…
-
Thanks for the quick reply. Don't know how I easily can add new users on my RPi broker, so reverted to a previous version for now. Will it be possible to check on same user but different DeviceID in a future update?
-
@MennoVanGrinsven, Yesterday I updated from an Owntracks version where topics were used to the newest version of Owntracks. I don't exactly understand how to get it to work on the new way. I enabled the use of the MQTT broker. I have MQTT running …
-
quakerix said: Hey guys, I have a FGS-222 and the secondary switch isn't switching anymore. Physically or via the UI. I reported an issue: - https://github.com/athombv/com.fibaro/issues/181 I do see z-wave activity when I switch, but nothing …