This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.
Fibaro

Fibaro motion sensor

martijn101martijn101 Member
edited May 2018 in Nederlands
Beste Forum bezoekers,

Ik heb een probleem met de Fibaro motion sensor.
Ik had eerst 1 motion sensor, dat was geen probleem, ik heb de set nu geupgrade naar 4 sensoren.
Maar nu werkt het niet goed meer. De motion sensoren blijven hangen (hij blijft alarm geven dat er beweging is, ook is dit niet het geval) 

Het gaat goed tot 2 sensoren daarna beginnen de problemen. Op het probleem op te lossen heb ik de fibaro plugin en ook de Homey. herstart maar het werkt niet. daarna zijn ook alle info van het sensoren weg. (om dit probleem op te lossen moeten de sensoren weer verwijdert worden opnieuw worden toegevoegd.)

Hebben jullie een oplossing om alle 4 de sensoren goed te kunnen laten werken?
Alvast bedankt.


LOG:

2018-05-31T20:12:17.035Z2018-

Node[7]: Received application command for COMMAND_CLASS_SECURITY, data: 0x40

2018-05-31T20:12:17.036Z

Node[7]: [COMMAND_CLASS_SECURITY] {}

2018-05-31T20:12:17.036Z

Node[7]: [COMMAND_CLASS_SECURITY] [SECURITY_NONCE_REPORT] {"type":"Buffer","data":[242,113,40,114,240,126,252,51]}

2018-05-31T20:12:17.037Z

Node[7]: sendData to COMMAND_CLASS_SECURITY, params 0x80f2712872f07efc33

2018-05-31T20:12:17.041Z

Command[355] start: sendData

2018-05-31T20:12:17.042Z

ProcessSendData[353]: To node: 7 with data: 0x9880f2712872f07efc33 and txOptions: AUTO_ROUTE,EXPLORE

2018-05-31T20:12:17.061Z

Command[355] end: sendData

2018-05-31T20:12:17.100Z

Node[7]: Received application command for COMMAND_CLASS_SECURITY, data: 0x40

2018-05-31T20:12:17.100Z

Node[7]: [COMMAND_CLASS_SECURITY] {}

2018-05-31T20:12:17.101Z

Node[7]: [COMMAND_CLASS_SECURITY] [SECURITY_NONCE_REPORT] {"type":"Buffer","data":[243,226,186,151,200,240,158,245]}

2018-05-31T20:12:17.101Z

Node[7]: sendData to COMMAND_CLASS_SECURITY, params 0x80f3e2ba97c8f09ef5

2018-05-31T20:12:17.102Z

Command[356] start: sendData

2018-05-31T20:12:17.102Z

ProcessSendData[354]: To node: 7 with data: 0x9880f3e2ba97c8f09ef5 and txOptions: AUTO_ROUTE,EXPLORE

2018-05-31T20:12:17.121Z

Command[356] end: sendData

2018-05-31T20:12:17.171Z

Node[7]: Received application command for COMMAND_CLASS_SECURITY, data: 0x40

2018-05-31T20:12:17.172Z

Node[7]: [COMMAND_CLASS_SECURITY] {}

2018-05-31T20:12:17.172Z

Node[7]: [COMMAND_CLASS_SECURITY] [SECURITY_NONCE_REPORT] {"type":"Buffer","data":[244,255,21,177,144,57,67,210]}

2018-05-31T20:12:17.172Z

Node[7]: sendData to COMMAND_CLASS_SECURITY, params 0x80f4ff15b1903943d2

2018-05-31T20:12:17.173Z

Command[357] start: sendData

2018-05-31T20:12:17.173Z

ProcessSendData[355]: To node: 7 with data: 0x9880f4ff15b1903943d2 and txOptions: AUTO_ROUTE,EXPLORE

2018-05-31T20:12:17.192Z

Node[7]: Received application command for COMMAND_CLASS_SECURITY, data: 0x40

2018-05-31T20:12:17.192Z

Node[7]: [COMMAND_CLASS_SECURITY] {}

2018-05-31T20:12:17.193Z

Node[7]: [COMMAND_CLASS_SECURITY] [SECURITY_NONCE_REPORT] {"type":"Buffer","data":[245,45,115,227,69,161,246,36]}

2018-05-31T20:12:17.195Z

Node[7]: sendData to COMMAND_CLASS_SECURITY, params 0x80f52d73e345a1f624

2018-05-31T20:12:17.203Z

Command[357] end: sendData

2018-05-31T20:12:17.204Z

Command[358] start: sendData

2018-05-31T20:12:17.204Z

ProcessSendData[356]: To node: 7 with data: 0x9880f52d73e345a1f624 and txOptions: AUTO_ROUTE,EXPLORE

2018-05-31T20:12:17.223Z

Command[358] end: sendData

2018-05-31T20:12:17.258Z

Node[7]: Received application command for COMMAND_CLASS_SECURITY, data: 0x40

2018-05-31T20:12:17.258Z

Node[7]: [COMMAND_CLASS_SECURITY] {}

2018-05-31T20:12:17.259Z

Node[7]: [COMMAND_CLASS_SECURITY] [SECURITY_NONCE_REPORT] {"type":"Buffer","data":[246,180,229,197,229,227,120,118]}

2018-05-31T20:12:17.259Z

Node[7]: sendData to COMMAND_CLASS_SECURITY, params 0x80f6b4e5c5e5e37876

2018-05-31T20:12:17.260Z

Command[359] start: sendData

2018-05-31T20:12:17.260Z

ProcessSendData[357]: To node: 7 with data: 0x9880f6b4e5c5e5e37876 and txOptions: AUTO_ROUTE,EXPLORE

2018-05-31T20:12:17.284Z

Node[7]: Received application command for COMMAND_CLASS_SECURITY, data: 0x40

2018-05-31T20:12:17.284Z

Node[7]: [COMMAND_CLASS_SECURITY] {}

2018-05-31T20:12:17.285Z

Node[7]: [COMMAND_CLASS_SECURITY] [SECURITY_NONCE_REPORT] {"type":"Buffer","data":[247,179,8,75,146,225,205,178]}

2018-05-31T20:12:17.285Z

Node[7]: sendData to COMMAND_CLASS_SECURITY, params 0x80f7b3084b92e1cdb2

2018-05-31T20:12:17.296Z

Command[359] end: sendData

2018-05-31T20:12:17.297Z

Command[360] start: sendData

2018-05-31T20:12:17.297Z

ProcessSendData[358]: To node: 7 with data: 0x9880f7b3084b92e1cdb2 and txOptions: AUTO_ROUTE,EXPLORE

2018-05-31T20:12:17.315Z

Command[360] end: sendData

2018-05-31T20:12:17.821Z

Node[5]: Received application command for COMMAND_CLASS_SECURITY, data: 0x40

2018-05-31T20:12:17.822Z

Node[5]: [COMMAND_CLASS_SECURITY] {}

2018-05-31T20:12:17.822Z

Node[5]: [COMMAND_CLASS_SECURITY] [SECURITY_NONCE_REPORT] {"type":"Buffer","data":[248,225,151,116,92,28,159,203]}

2018-05-31T20:12:17.823Z

Node[5]: sendData to COMMAND_CLASS_SECURITY, params 0x80f8e197745c1c9fcb

2018-05-31T20:12:17.823Z

Command[361] start: sendData

2018-05-31T20:12:17.824Z

ProcessSendData[359]: To node: 5 with data: 0x9880f8e197745c1c9fcb and txOptions: AUTO_ROUTE,EXPLORE

2018-05-31T20:12:17.842Z

Command[361] end: sendData

2018-05-31T20:12:17.868Z

Node[5]: Received application command for COMMAND_CLASS_SECURITY, data: 0x816f18f61d1cdef7876b7e4469f1ce4bc0edcc26f83a143eaec4abbf8d

2018-05-31T20:12:17.871Z

Node[5]: [COMMAND_CLASS_SECURITY] {"Initialization Vector byte":{"type":"Buffer","data":[111,24,246,29,28,222,247,135]},"Properties1 (Raw)":{"type":"Buffer","data":[107]},"Properties1":{"Sequence Counter":11,"Sequenced":false,"Second Frame":true},"Command byte":{"type":"Buffer","data":[126,68,105,241,206,75,192,237,204,38]},"Receivers nonce Identifier (Raw)":{"type":"Buffer","data":[248]},"Receivers nonce Identifier":248,"Message Authentication Code byte":{"type":"Buffer","data":[58,20,62,174,196,171,191,141]}}

2018-05-31T20:12:17.888Z

Node[5]: [COMMAND_CLASS_NOTIFICATION] {"V1 Alarm Type (Raw)":{"type":"Buffer","data":[0]},"V1 Alarm Type":0,"V1 Alarm Level (Raw)":{"type":"Buffer","data":[0]},"V1 Alarm Level":0,"Reserved (Raw)":{"type":"Buffer","data":[0]},"Notification Status (Raw)":{"type":"Buffer","data":[255]},"Notification Status":"On","Notification Type (Raw)":{"type":"Buffer","data":[7]},"Notification Type":"Home Security","Event (Raw)":{"type":"Buffer","data":[0]},"Event":0,"Properties1 (Raw)":{"type":"Buffer","data":[1]},"Properties1":{"Event Parameters Length":1,"Sequence":false},"Event Parameter":{"type":"Buffer","data":[8]},"Event (Parsed)":"Event inactive"}

2018-05-31T20:12:17.889Z

Node[5]: Decapsulated frame from COMMAND_CLASS_SECURITY to COMMAND_CLASS_NOTIFICATION, data 0x05000000ff07000108

2018-05-31T20:12:18.663Z

Node[3]: Received application command for COMMAND_CLASS_SECURITY, data: 0x40

2018-05-31T20:12:18.663Z

Node[3]: [COMMAND_CLASS_SECURITY] {}

2018-05-31T20:12:18.663Z

Node[3]: [COMMAND_CLASS_SECURITY] [SECURITY_NONCE_REPORT] {"type":"Buffer","data":[249,192,25,90,9,145,147,184]}

2018-05-31T20:12:18.663Z

Node[3]: sendData to COMMAND_CLASS_SECURITY, params 0x80f9c0195a099193b8

2018-05-31T20:12:18.664Z

Command[362] start: sendData

2018-05-31T20:12:18.664Z

ProcessSendData[360]: To node: 3 with data: 0x9880f9c0195a099193b8 and txOptions: AUTO_ROUTE,EXPLORE

2018-05-31T20:12:18.683Z

Command[362] end: sendData

2018-05-31T20:12:19.001Z

Node[8]: Received application command for COMMAND_CLASS_SECURITY, data: 0x40

2018-05-31T20:12:19.001Z

Node[8]: [COMMAND_CLASS_SECURITY] {}

2018-05-31T20:12:19.001Z

Node[8]: [COMMAND_CLASS_SECURITY] [SECURITY_NONCE_REPORT] {"type":"Buffer","data":[250,104,90,217,42,128,36,192]}

2018-05-31T20:12:19.001Z

Node[8]: sendData to COMMAND_CLASS_SECURITY, params 0x80fa685ad92a8024c0

2018-05-31T20:12:19.002Z

Command[363] start: sendData

2018-05-31T20:12:19.002Z

ProcessSendData[361]: To node: 8 with data: 0x9880fa685ad92a8024c0 and txOptions: AUTO_ROUTE,EXPLORE

2018-05-31T20:12:19.021Z

Command[363] end: sendData

2018-05-31T20:12:19.072Z

Node[8]: Received application command for COMMAND_CLASS_SECURITY, data: 0x81941dce469c06f6588e677cd18161880a59e59cfa4a1a8e15210852bc

2018-05-31T20:12:19.072Z

Node[8]: [COMMAND_CLASS_SECURITY] {"Initialization Vector byte":{"type":"Buffer","data":[148,29,206,70,156,6,246,88]},"Properties1 (Raw)":{"type":"Buffer","data":[142]},"Properties1":{"Sequence Counter":14,"Sequenced":false,"Second Frame":false},"Command byte":{"type":"Buffer","data":[103,124,209,129,97,136,10,89,229,156]},"Receivers nonce Identifier (Raw)":{"type":"Buffer","data":[250]},"Receivers nonce Identifier":250,"Message Authentication Code byte":{"type":"Buffer","data":[74,26,142,21,33,8,82,188]}}

2018-05-31T20:12:19.102Z

Node[8]: [COMMAND_CLASS_NOTIFICATION] {"V1 Alarm Type (Raw)":{"type":"Buffer","data":[0]},"V1 Alarm Type":0,"V1 Alarm Level (Raw)":{"type":"Buffer","data":[0]},"V1 Alarm Level":0,"Reserved (Raw)":{"type":"Buffer","data":[0]},"Notification Status (Raw)":{"type":"Buffer","data":[255]},"Notification Status":"On","Notification Type (Raw)":{"type":"Buffer","data":[7]},"Notification Type":"Home Security","Event (Raw)":{"type":"Buffer","data":[0]},"Event":0,"Properties1 (Raw)":{"type":"Buffer","data":[1]},"Properties1":{"Event Parameters Length":1,"Sequence":false},"Event Parameter":{"type":"Buffer","data":[8]},"Event (Parsed)":"Event inactive"}

2018-05-31T20:12:19.103Z

Node[8]: Decapsulated frame from COMMAND_CLASS_SECURITY to COMMAND_CLASS_NOTIFICATION, data 0x05000000ff07000108

Tagged:

Comments

  • RocodamelsheRocodamelshe Member
    edited May 2018
    <<Modbreak>> onnodige tags verwijderd.
  • rickprickp Member
    Ik heb dit ook wel eens me 1 van mijn 2 fibaro's. Soms is het na een dag of 2 dagen vanzelf weg. Mijn coolcams hebben dit niet. Ik ga dit even volgens om te zien of er oplossingen langs komen. 

    Verwijderen en opnieuw toevoegen werkt als symtoom bestrijding. Niet de beste manier want dan gaan al de flows natuurlijk stuk 
Sign In or Register to comment.