This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Closed Official Zigbee SDK2
[App] Xiaomi-mi ZigBee - Main discussion topic (v0.4.1)
This discussion has been closed.
Comments
first of all, thanks for this addon very happy with it! Will make a donation this weekend.
I bought 2x the Xiaomi Human Body sensors, added it and it's working, but I need some help with creating a flow.
I want to create a flow; if the motion sensor recognize a motion, and the flux is around 25, it activates my Philips Hue lamp and after 30 seconds, if it doesn't recognize a motion anymore, my Philips Hue should turn off.
Do I need to create 2 flows for this? And I don't get the option for #flux in the second column, any advice ?
Thanks
So to clarify, I have already added 20 or so Xiaomi/Aqara devices before and now it is not possible.
@TedTolboom just wanted you to know. Also many thanks for the app. If you clear out the main bugs, it will be great!
1. I tried to pair by adding a zigbee device. I pressed the aqara motion sensor button for 5-6 seconds and then pushed the button 4 times every 1-2 seconds. It didn't work.
2. Immediately after I tried to pair by using the Xiaomi app. The same procedure as above and it worked.
@captkiwi it's a long shot, but try to do these two steps and see if it works. Chances are more likely however that it is due to something else, but it could be worth a try.
If motion is sensed then turn on the light and STOP(!) the countdowntimer.
If no montion is sensed, START the countdowntimer.
If the countdowntimer reaches zero, then turn of the light
The lux is in the Tags and can be used with a 'logic' card.
Just to let you know that today I received the ZigBee curtain motor.
Did you already have a chance for implementing this device into the app?
Still waiting for a stable 1.5.x release of homey to test a lot of new stuff I have laying around...
I will check with @sprut on his status implementing this driver... or I will need to have access to the curtain motor myself...
Yes, would be nice! I am receiving the curtain controller this month, so i also hope their wil be progression.
An other question from me is: Is it possible to get this thing working without the gateway and without homey, in the promo video they just pull the curtain and it moves, is that something who is automatic implemented, without a gateway?
Of course I hope that we will control it soon by homey. that is a lot nicer
@TedTolboom
I'm willing to lend you my motor if that would be of help...
Seems this would be great addition to trigger record by motion sensor/send notification etc
will have a look into it, if I can find more info on this camera
https://xiaomi-mi.com/ip-cameras/xiaomi-aqara-smart-camera-gateway-edition-white/
I'm not sure if (an sensor connected to) Homey is able to trigger the camera and or if the camera (gateway) has an API to connect to it... since it has a direct connection to an app, I do expect that there is one...
Just to set the right expectations; current focus will be to finish Zigbee implementation for the remaining devices first
I'll hold off buying for now then, with fingers crossed for the future!
Just installed 2 wireless buttons (the round ones), an aqara wireless switch (square, round button inside) and a temp/humidity sensor.
Pairing went fine. After that, I could even use one of the switches in a flow.
But within half an our all of the switches stopped working. Also: the blue light does not light up anymore after pressing the switch.
I have to note: I had the same thing with the IKEA switch: added it, worked. Tried a day later, no longer working (it now even says it is disconnected?). Is this some kind of generic Homey Zigbee bug maybe? My Zigbee lights still work fine...
The temp sensor is still working fine also.
EDIT:
It seems my fat fingers disabled the flow I was testing with... After re-pairing the buttons seem to work fine now...