This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Official
[Published] Wireless Weather Sensors (1.2.1)
https://apps.athom.com/app/com.weather-sensors
Homey app to read information from wireless weather sensors on 433/868 MHz.
Currently the following protocols are supported on 433 MHz.
- Alecto v1 & v3 (WS-1050/WS-1100/WS-1200)
- Auriol Z31130
- Cresta: used in numerous brands 433 MHz sensors, like Cresta & TFA
- La Crosse: only TX3 decoding fully implemented, WS7000 implemented, but not tested
- Oregon Scientific: version 2 and 3 of the protocol are supported
- UPM/Esic: only tested with WT440H
- Temperature sensors
- Temperature/humidity sensors
- Anemometers
- Rain gauges
- UV sensors
- Barometers
- Brightness sensor
Tagged:
Comments
http://fredboboss.free.fr/articles/tx29.php/
Thanks in advance!
Kind regards,
Sjaak
If you can record a signal of the TX29DTH-IT with Homey, then I'm happy yo add the decoding code.
You can record a signal from the console with
After installation of the 'wireless weather sensor' -app ,: nothing appears on the list of the available
sensors. Do I have tot do something special to activate it ?
The head-unit and the outside-unit all both within 4 meters of Homey.
The head-unit gives perfect the outdoor temp and the rain volume.
App is not installing on FW1.3rc3 ??
oke I shall do it this evening
I am at work now :-)
I installed the new version both via the app store and via the command line, but in both cases I get:
I already uninstalled the old 0.1.1 version, but still same error. I run Homey version 1.3.0RC2
Gr. Remco
I am happy to do so. Can you please explain in more detail how to do so. I don't know how to get access to the console of my homey. What I've done so far:
Installed node-js
installed athom-cli
managed to login and select my homey
Gr. Sjaak
question though, I get a lot of error notifications related to a "not responding" thermometer
Would be happy to give you the needed information to implement this sensor. It's operating on 868 Mhz.
api('POST', '/manager/microcontroller/record', { frequency: '868' }, console.log)
XMLHttpRequest {onreadystatechange: null, readyState: 1, timeout: 0, withCredentials: false, upload: XMLHttpRequestUpload…}
[Array(33), Array(40)
0: Array(33)
0: 73
1: 110
2: 10
3: 31
4: 53
5: 99
6: 52
7: 21
8: 76
9: 331
0: 11
11: 34
12: 121
13: 54
14: 44
15: 57
16: 145
17: 20
18: 55
19: 23
20: 125
21: 33
22: 86
23: 30
24: 49
25: 19
26: 48
27: 29
28: 19
29: 40
30: 10
31: 30
32: 150
length: 33
__proto__: Array(0)
1: Array(40)
0: 208
1: 195
2: 33
3: 11
4: 54
5: 226
6: 109
7: 135
8: 62
9: 235
10: 162
11: 88
12: 112
13: 371
14: 21
15: 76
16: 29
17: 68
18: 30
19: 522
20: 159
21: 91
22: 34
23: 117
24: 20
25: 124
26: 60
27: 40
28: 31
29: 103
30: 56
31: 11
32: 34
33: 68
34: 32
35: 192
36: 87
37: 33
38: 64
39: 390
length: 40
__proto__: Array(0)
length: 2
__proto__: Array(0)
I was wondering if you already looked at the Auriol V2 protocol. I believe it's the most used protocol by Xiron devices. A fairly cheap weathersensor range of products. Any chance you can add it?
@keverjeroen Excellent question. I have the same thing. But on the display of the sensor it is also stuck at 'LO %'. I thought my sensor was bad. It really transmits '00001110' continuously where (according to the protocol description I found) it should transmit humidity.
I just reinstalled the 1.01 version from the App Store. My Ventus w044 sensor is found and I can add the device, but when I try to look at the values in the Homey desktop app, I just see a continues spinning grey round. Settings are working, but not the parameters. I tried to re-add the device, restarted the app and restarted Homey, but still same problem.
IOS app shows card with parameters correctly however.
I am running firmware 1.3.0-rc5.
@RemcoHannink That is an Athom issue. I have that with mobile cards in general. Try & try again...
@keverjeroen Humidity is above 40% and I have also valid values on the display and Homey again. I guess 14 is the value for LO humidity. According to the manual it should report from 25% to 90% humidity.
Mebus protocol?
The weather sensor software now installs without issues. But i don't see my Cresta weather sensors appearing??
Tried restarting the app, and PTP homey. But nothing appears.
Thermo/hygro sensor and rain sensor. not appearing.