›
This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.
Closed

Homey v0.10.0

123457»

Comments

  • blusserblusser Member
    Hmm must be a local thing then, thanks for checking 
  • AndreOerlemansAndreOerlemans Member
    olive said:
    show previous quotes
    Same problem here, for me is this update a disaster

    Homey is useless after update, same here.
  • Erwin1Erwin1 Member
    edited September 2016
    this saterday I had the same probleem as everyone else (dutch language, logica), after modifying some flows, and reïnstall better logic, everything looks fine, But I need to test better logic tomorrow. Dutch language is working again (also internal commands :-) ). Now I need to test ir. 

    @johan_kreeft ; So at first you had the same issues as everyone else after updating to 0.10.0, but afterwards everything is now working? What did you do exactly and in what order? 
    Because you just might have the solution to the issues regarding 0.10.0...

    And are you absolutely sure that the Dutch built in commands now work again? Could you test the following command: "OK Homey, wat voor dag is het vandaag?"
  • Priknr1Priknr1 Member
    I had the same problem. But after giving up and coming back after 2 hours, all was fine.
    So I did not do anything. Just let the homey do it's thing and wait. 
  • MartijnDeRhoterMartijnDeRhoter Member
    My Kaku app (2.4.0 )crashes a lot on 0.10.0:

    Stack trace:
    false
Exit code: 0

    Although usually exit code 0 means all is well - it still has the orange triangle next to it and Kaku devices do not work.
  • MikeOneMikeOne Member
    show previous quotes
    Yes please... Or run some automated test scripts - just sayin'...
  • bvdbosbvdbos Member
    MartijnDeRhoter said:
    My Kaku app (2.4.0 )crashes a lot on 0.10.0:

    Stack trace:
    false
Exit code: 0

    Although usually exit code 0 means all is well - it still has the orange triangle next to it and Kaku devices do not work.
    I'd definitely make an issue for this... Strange... Never had the KaKu app crash on me...
  • MartijnDeRhoterMartijnDeRhoter Member
    edited September 2016
    It never crashed before, until after the update. I'll create an issue, thanks.

    Edit: #900! https://github.com/athombv/homey/issues/900
  • johan_kreeftjohan_kreeft Member
    Erwin1 said:
    this saterday I had the same probleem as everyone else (dutch language, logica), after modifying some flows, and reïnstall better logic, everything looks fine, But I need to test better logic tomorrow. Dutch language is working again (also internal commands :-) ). Now I need to test ir. 

    @johan_kreeft ; So at first you had the same issues as everyone else after updating to 0.10.0, but afterwards everything is now working? What did you do exactly and in what order? 
    Because you just might have the solution to the issues regarding 0.10.0...

    And are you absolutely sure that the Dutch built in commands now work again? Could you test the following command: "OK Homey, wat voor dag is het vandaag?"


    Sorry, I was wrong, I said turn the lights on in the kitchen (doe de lampen aan in de keuekn), I don't have a flow with such a command, but if I say what time is it or 
    Heads or tails (kop of munt) Homey doesn't response
  • Erwin1Erwin1 Member
    @johan_kreeft too bad, I had some hope after reading your post. But no problem!  ;)
  • PimViergeverPimViergever Member
    KeepT said:
    show previous quotes

    [Solution alert] at least I hope for others as well
    After 32 power cycles i found the solution to homeys inability to save the bl variables and soundboard files. Turns out that, after installing the app and even doing power cycles,  these apps are incapable to hold variables or save files, but only after making these apps inactive ("uitschakelen") and reactivating them, they are now able to hold variables and save files. So somehow this "activates" the app  or puts it into "on" modus. Next i did this "app-activating-cycle"  (aac) for all of my apps and guess what, my homey can hear my battery-powered kaku devices! 
    Jump for joy! God only knows what else is fixed by the aac, but sure i am gonna find out tonight.
    Hope this advise help others as well.

    @KeepT ;

    Legend! I've tried:
    1. Reboot
    2. Reinstalling the KaKa app.

    What did work:
    1. Disable all installed apps (already deleted the KaKu app, but disabled it once again)
    2. Reboot
    3. Powercycle
    4. Enabled all apps
    5. Could reconnect all KaKu devices.
    Note: the AWMT-003 is beter recognized as APA2-2300R but that's an 'old' workaround

    Thanks for the info about the powercycle and disabling
  • bvdbosbvdbos Member
    Solution for disappearing apps, menu's etc was found by Athom:
    https://github.com/athombv/homey/issues/890#issuecomment-249662873
  • KeepTKeepT Member
    PimViergever said:
    show previous quotes
    @KeepT ;

    Legend! I've tried:
    1. Reboot
    2. Reinstalling the KaKa app.

    What did work:
    1. Disable all installed apps (already deleted the KaKu app, but disabled it once again)
    2. Reboot
    3. Powercycle
    4. Enabled all apps
    5. Could reconnect all KaKu devices.
    Note: the AWMT-003 is beter recognized as APA2-2300R but that's an 'old' workaround

    Thanks for the info about the powercycle and disabling

    Your welcome.
    Beta testing is in my DNA.
    It took a bit of my time, but then it got me and my homey(s) a step further

  • KeepTKeepT Member
    BasVanDenBosch said:
    show previous quotes
    I'd definitely make an issue for this... Strange... Never had the KaKu app crash on me...

    My kaku 2.4.0 crashes as well (fw 0.10.0) but not on all devices. It crashes on e.g the doorbell. I can pair it up to Homey, the first trigger from the doorbell causes Homey to crash.
    Work around (for now) is to reset the 433 microcontroller via a post command after the doorbell has been rang.

  • JanHJanH Member
    Does anybody recognize that since v0.10.0 all devices and all flows have gone at my IPad while they are still available at my windows laptop and my iMac? I'm using Chrome at all three.
  • Fire69Fire69 Member
    Not really an answer to your question, but Chrome on iOS is not really Chrome but Webkit with a Chrome-look.
    So maybe they changed something that makes it incompatible now...
  • DieterKoblenzDieterKoblenz Member
    KeepT said:
    My kaku 2.4.0 crashes as well (fw 0.10.0) but not on all devices. It crashes on e.g the doorbell. I can pair it up to Homey, the first trigger from the doorbell causes Homey to crash.
    Work around (for now) is to reset the 433 microcontroller via a post command after the doorbell has been rang.

    Just curious, but does it trigger a flow or will it just crash?
  • BartOttenBartOtten Member
    So I added the Samsung remote. The TV switched on/off when the Homey heard 'TV'. Excitement all over the place!

    Next stop: The cable box so I could actually see a channel. Took me 20 minutes to add all the buttons from the remote. Added a flow which 'sends' digit 1.....and all IR stuff stopped working. Great :neutral: 

    Error: too_many_devices (yeah, cause 2 is a shitload.....)

    So I removed the Samsung remote. For that one I can add within a minute. Down to 1 remote should do the trick right? Can't be too many...

    Error: Cannot read property 'device' of undefined

    For goodness sake.....I know it's in the unstable channel. But unstable usually means 'some things are working, some things are not'. Athom changed it too 'you might find something that works for a little while'

    Athom, I know comments like these do not add to the motivation of the developers. But it's also unfair to hail and praise while actually it's a bit messed up. Please, please, please focus on getting the basic promises straight and stable for 90% of the population. Creating an in-house solution to also please the other 10% is really cool, but might result in a 100% fail of the product.

    Minimal Viable Product....does it (led) ring a bell? ;)
  • Trustme2Trustme2 Member
    BartOtten said:
    So I added the Samsung remote. The TV switched on/off when the Homey heard 'TV'. Excitement all over the place!

    ...

    Minimal Viable Product....does it (led) ring a bell? ;)
    This is known already :wink: 
    Will be fixed in 0.10.1.
  • mrandersonmranderson Member
    edited September 2016
    is this a known error with the chromecast? Worked fine before.

     


    Tried deleting the device and adding it again (didn't help, by the way), and I also got quite a few duplicates in the list. 






    I also found out why my hues aren't turned on in the morning anymore. The flow stops/hangs on the first dimmer card, so only the first light is turned on. Anyone else having this problem?


    2.JPG 15.9K
    1.JPG 35K
    3.JPG 25.1K
  • ArjanArjan Member
    @mranderson HUE is a known bug and solved in 10.1
  • PhuturistPhuturist Member
    @mranderson missing_listeners is a known bug and is solved in 0.10.1
  • JulianJulian Member
    nklerk said:
    show previous quotes
    I removed all cards and re added them and the timings behaved different again. I'm not sure how this is affected but there is something wrong with the delays. I have to test more to find the exact bahaviour 
    I have also made a test flow and it keeps on working the 'new' way. Could someone from @Athom ; perhaps inform us formally if this is a bug or a (new) feature? So will this behaviour stay when all the bugs are fixed or will it go back to the old way? This to avoid that I need to test and recalculate my delays everytime a new FW comes out. 

  • RobinVanKekemRobinVanKekem Member
    @Julian ;
    Can't find it on slack but if my memory serves me well it was labeled as a bug and will be fixed
  • bvdbosbvdbos Member
    fixed for 0.10.1:
    https://github.com/athombv/homey/issues/893
  • RobinVanKekemRobinVanKekem Member
    BasVanDenBosch said:
    fixed for 0.10.1:
    https://github.com/athombv/homey/issues/893
    Ah yes, that's where I read it!
  • JulianJulian Member
    Thanks guys, next time I will go through Github before posting here! Although the name of the issue on Github does not really indicate this issue specifically...
  • mrandersonmranderson Member
    Yes, thanks @Phuturist @Arjan. Will also look more closely on github before posting ;)
  • bvdbosbvdbos Member
    https://firmware.athom.com/ :p

  • WilfriedWilfried Member
    http://www.homewizard.nl/smartwares-thermo-hygrometer.html
This discussion has been closed.