Homey v0.8.35

Emile

Homey v0.8.35 has just been released to experimental users.

Changelog:

• Added Flow folders
• Added Mobile vibrate and confirm Flow cards
  
• Fixed an issue where mobile cards would not appear
• Improved the App Watchdog
  
• Various improvements

Enjoy your weekend, and please report any issues here: https://github.com/athombv/homey/issues

MennoVanGrinsven

Hmmm i see the update, but cannot select install. Server too busy??

BasPost

Emile said:

Homey v0.8.35 has just been released to experimental users.

Changelog:

• Added Flow folders
• Added Mobile vibrate and confirm Flow cards
  
• Fixed an issue where mobile cards would not appear
• Improved the App Watchdog
  
• Various improvements

Enjoy your weekend, and please report any issues here: https://github.com/athombv/homey/issues

Thanks @Emile updating right now! Gonna test this weekend!  
Have a nice weekend!

DieterKoblenz

And the orange wheel is spinning

djesko

reset and update ....have a nice weekend ! 

TedTolboom

Some quick observations:
- The bug (#607) where it was not possible to save the Z-wave settings via the device card seems to be fixed (no error message)
- After restart of the Homey app (re-login), I am now able to see my devices in the App (was not the case on 0.8.34)

Thanks @Athom ;

aloft

First observation:
- Save Z-wave settings: OK
- BetterLogic and Countdown still not saving their settings. Not in 'install' mode nor in 'run' mode.

Menno

installing.............

MartijnDeRhoter

Hm. As aloft mentioned, Better Logic still won't remember new variables. Sigh. Athom, did you test this?

djesko

and fibaro plug dead after reboot ....  have 15 plugs and need this to work to move over to Homey ! 

Back to the box for homey until next update 

Menno

...... freeze was busy creating flow folders and filling them with flows

caseda

@djesko
my fibaro wall plug is still working a ok.
so maybe a restart is to be needed.

Emile

MartijnDeRhoter said:

Hm. As aloft mentioned, Better Logic still won't remember new variables. Sigh. Athom, did you test this?

As a matter of fact we did! https://athomcommunity.slack.com/archives/general/p1463769744003832

Kritjuu

android app works now. But problem with hue lights. I updated the hue bridge and hue app. 
error: Hue Phoenix down.. onoff:invalid_type

Emile

Kritjuu said:

android app works now. But problem with hue lights. I updated the hue bridge and hue app. 
error: Hue Phoenix down.. onoff:invalid_type

Try re-adding them!

BasPost

Menno said:

...... freeze was busy creating flow folders and filling them with flows

I had exact the same, was creating flow folders and loading a flow, when the page freeze, after that, Homey freezed with a stable white LED ring. After a powercycle, Homey rebooted, now no freeze so far

Menno

.... removed power ....... connect power ........ create flow folder and fill it .......... freeze

djesko

Emile said:

MartijnDeRhoter said:

Hm. As aloft mentioned, Better Logic still won't remember new variables. Sigh. Athom, did you test this?

As a matter of fact we did! https://athomcommunity.slack.com/archives/general/p1463769744003832

No variables after power on / off

djesko

caseda said:

@djesko
my fibaro wall plug is still working a ok.
so maybe a restart is to be needed.

No go here , reboot or power on/off still dead device ....timeout ....  

BasPost

@Emile @Athom ; Is the the IOS app also updated?

Aljoen

Same here...the created flow folder is btw gone after the crash/freeze

keverjeroen

How do I drag a existing flow in to a new folder?  

BasPost

keverjeroen said:

How do I drag a existing flow in to a new folder?  

Open the Flow Folder with the triangle pointing down, drag an existing flow into it a little bit to the right, so the gray box is shifted a little bit to the right, then drop the flow

MartijnDeRhoter

Emile said:

MartijnDeRhoter said:

Hm. As aloft mentioned, Better Logic still won't remember new variables. Sigh. Athom, did you test this?

As a matter of fact we did! https://athomcommunity.slack.com/archives/general/p1463769744003832

Reading that page it seems that it works for some (irritanterik) but not all (ralfvd)

So I guess it's a known issue that hasn't been fixed in 0.8.35?

Menno

@keverjeroen ;
create folder --> open folder arrow down --> select flow and move it under folder and move a little bit to the right

keverjeroen

BasPost said:

keverjeroen said:

How do I drag a existing flow in to a new folder?  

Open the Flow Folder with the triangle pointing down, drag an existing flow into it a little bit to the right, so the gray box is shifted a little bit to the right, then drop the flow

Thaks! Only problem is, that after saving a flow, thats in a folder, it falls out the folder again..

markmg

Big Improvement everyting working very good 
ios and andriod also working

TedTolboom

KaKu didn't work directly after updating, nor after a reboot...
disconnected power and reconnected it... and KaKu is working again...

Menno

..... starting to get a little bit irritated 3th freeze maybe start testing other things first

thayoung1

keverjeroen said:

BasPost said:

keverjeroen said:

How do I drag a existing flow in to a new folder?  

Open the Flow Folder with the triangle pointing down, drag an existing flow into it a little bit to the right, so the gray box is shifted a little bit to the right, then drop the flow

Thaks! Only problem is, that after saving a flow, thats in a folder, it falls out the folder again..

Same problem here. Flow in a subfolder. After save it's placed in root again.

thayoung1

Anybody seen confirm push card working? Build 45 with 0.8.35 here, when testing flow i don't get any push notification...