This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
viix
About
- Username
- viix
- Joined
- Visits
- 503
- Last Active
- Roles
- Member
Comments
-
That’s odd. I’m using 4 Neo’s, 6 aqara pir 2 hue motion sensors and non has given false alarms. one that kept getting triggered was a balcony (aqara) which I discovered to be caused by the curtains and plants moving in the wind. What I did to overc…
-
edsallo said: New Broadlink Pro Plus 2018. s/n RM33xxxx. The RF433 code is read and stored. But through Flow can not be played. How do you set it to learn RF? I clicked the learn RF button and the rm pro led turns orange but nothing is s…
-
It was working great the 1st day or 2.. but now the dyson app can't send commands in a flow? I have my fan on static IP so it shouldn't be network issues since I can access it via my dyson link app..
-
Hmm, uninstalled and reinstalled the app.. when I tried to learn RF, the led on the rm pro 3 turns on and I would Long press on the rf remote to learn and press again to learn.. it worked once to record but I can’t get it to work again to learn any …
-
there is a card for philips hue in the flow editor for "turn all lights off"
-
RM Pro Plus now appears in the flows but I’ve not had luck learning RF..
-
I believe @limkopi78's app was modded from another app. Both samsung's and the Yale app was forked from them hence abit more work is required to see how the reporting of the lock is currently working.. I understand a new Yale app has been updated re…
-
keep it simple, do a flow with the lock and send a push message or add a simple log entry via paper trails. Does it execute? I'm using the samsung app by Automate Asia and experiencing similar issues.. the trigger doesn't execute also so it's a prob…
-
Yes, use card A24 to get the JSON and then card T81 as trigger on a flow where you extract the json values. Thanks! Finally trimmed down my flows.. one more question, is there a way to execute a flow when any of the json path returns an erro…
-
I’m polling a few public api with the Json to better logic variable card for 6 variables each. Is there a way to only poll once and extract the 6 variables via json instead of using the card 6 times to poll? the way I’m doing it seems to lag my ho…
-
I’ve been using the app with my (v2) roborock vacuum and it’s working great in flows so far. One question, does the vacuum report it’s status to homey? Ive set some motion sensor to ignore if the roborock is cleaning and it works great if the robo…
-
Not too sure about using better logic but I use the app "SETS" for this. Create a set and then for each virtual device, it will activate or deactivate a state. If any state in the set is on, turn on X. If no state active, turn off X. Much more accur…
-
Is there a way to identify which room the scenes corresponds to in the Set a Scene Flow card? I have several scenes with same or at least similar names and I have no way to identify which room it is for.
-
Same experience here, I can detect and add the newer RM Pro 3 Plus. I’m also able to learn IR (orange led on) in the settings page but when I select learn RF, nothing. In the flows page, the RM pro device is also not available so I cannot add anyt…
-
Omg that worked! Why didn’t I think of that! Thanks!
-
How do you guys use the rotation to effect the change smoothly and accurately since the rotation can jump a bit too much during a rotation. I was thinking if there is a way to smooth out that rotation via some kind of step based incremental variable…
-
Hi! I seem to be having issues with a pair of light strips that works sometimes but goes offline after a few days and I had to re-add it. It is located in a toilet that turns on when My Neo coolcam PIR activates a flow. Thing is the device is stil…
-
Thanks TedTolboom! All my Zwave plus switches are now added! For the 2 gang Zwave plus switches, the association for switch 2 works when I have it in group 5 instead of group 3 (as indicated in the Info when I mouseover the little "i" beside the te…
-
JvanBodegom said: ThijsVanUlden said: The Brel Motors app also works for the Dooya brand motors. I got my custom made blinds from AliExpress wich was a gamble but it worked out great and it's extra cool to be able to use Homey to cont…
-
I have 3 switches that I need to link/associate all their respective sub-node 4 together. I know you can just associate it with one another if it was just 2, but for 3 I can't add more than one association. What I did was to daisy chain the associa…
-
Here it is Type: MH-S311H Trying to add the 2 gang (MH-S312H) but homey's having a hard time detecting it..
-
I got a single and double gang high current switch that got added as a generic zwave device.. how do I get u the id your need to add it as MCO switch
-
I see the fan supported in the newer miio https://github.com/rytilahti/python-miio/blob/master/README.rst
-
I’ve just gotten the Xiaomi smart fan and hoping to somehow have this integrate to the app? Anything I can do on my end to help include into the app?
-
Can this app add association among the switch gang's switch? Say button 4 activate button 1 on another switch via the command class or I have to go through a homey flow? Still new to this so pardon my ignorance~