This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
vaderag
About
- Username
- vaderag
- Joined
- Visits
- 1,097
- Last Active
- Roles
- Member
Comments
-
djesko said: https://apps.athom.com/app/nl.bevlogenheid.countdown Perfect - thank you
-
keverjeroen said: vaderag said: I'm trying to set something up with the PIRs for If Motion has not been detected for 20minutes then turn off the lights - can anyone advise how I would do this? I have if light level <x and motion d…
-
Zev said: Bought the Benext Tagreader 500 a week ago including 4 (benext) tags. Successfully added the Tag reader, but the tags don't work. Looked @ "the stuff for geeks" but cannot find the command ALARM_REPORT_V2 in the log. Spotted the tex…
-
This seems to be standard behaviour - I've been playing around with this too (as also have Homey mic off and only use Alexa to interact) and i'm seeing the same issue. I think this is more an Alexa issue rather than a homey one tho as no Alexa comma…
-
Rocodamelshe said: vaderag said: Don't suppose you happen to know how I can interrupt and stop a flow midway through?! That's my next challenge... disable doesnt work as that just disables the entire flow... Plz stop asking the sam…
-
JPe said: @Vaderag an example: Start your alarm-flow with a preset of a variable with a value corresponding to the number of times you want to play the sound maximal. Let a second flow start on a change of the variable and if this variable >…
-
Also, I'm trying to do some logic where #Alarm_Sounds = #Alarm_Sounds - 1 - can anyone advise me how I lay this out? I've tried tags and writing it out and neither seems to work correctly...
-
caseda said: There is no way to stop a flow if it already is at the "then/else" column. You could try to work around it if it is something you can deactivate with another flow. Work around it how? One flow will be essentially "sound alar…
-
caseda said: @vaderag you can't use tokens in the name part, you need to type the name there. Is an open issue that will be probably be fixed in the new homey app, not possible to be fixed how it is implemented now. Ahhhh THANK YOU! So…
-
vaderag said: Is there any way I can make the sound repeat until a certain action is taken (e.g NFC presented?) Nobody? Ideally I'd like it to repeat a set number of times or for a set number of seconds too... I'd also like help (somewh…
-
It seems there are substantial issues with logic in general (or at least I seem to be having such): https://forum.athom.com/discussion/comment/59174 Either way, I have another question maybe someone here can help with - is it possible to interrupt…
-
Rocodamelshe said: Dunno if it's possible with "normal" variables, do know that it's possible with Better Logic variables. U can set the boolean to true or false then. Am not at home so cannot check. Well I've just tried with numeric va…
-
Just wanted to give this a little bump in case someone with technical skills that surpass my own wants to help the community get access to cheap devices
-
keverjeroen said: Maybe you can just point the PIR away from the light sources? But then it wont do the motion... one of the main reasons I wanted to go down the smart home route is that I didn't want 'one trick wonders'
-
Rocodamelshe said: Is it not possible to “flip” the Boolean in the “then” colom? That's the point - I want to set the boolean to false in that column (this is the disarm flow, so I want Alarm_Active = false / 0 / No depending where you r…
-
keverjeroen said: Your second question: The change in lux level when lights are on or of are realy minimal (at my home). Thanks - I'll take a look at that thread. I found this too - hence the question - in an ideal world I'd like lights th…
-
I'm trying to set something up with the PIRs for If Motion has not been detected for 20minutes then turn off the lights - can anyone advise how I would do this? I have if light level <x and motion detected turn on, so I need the opposite Also …
-
zimbra said: Mine is also always showing the tamper alarm Battery drains down quickly.. My battery is still showing 100% but only been running for 18hours. So it's either draining very slowly (as I'd expect) or reporting incorrectly... …
-
Thanks. Think i'm getting there... I have a bit of an issue where I'm trying to set some logic but the variable isn't appearing: So - trying to set the arming routine - Alarm_Arming is set true for 20s then set false (so that I can turn off easie…
-
Is there any way I can make the sound repeat until a certain action is taken (e.g NFC presented?)
-
lubbertkramer said: How do you know wich device gives wich alarm and works with wich card, that you can see on the tags of the card (so for motion device when pulled into the IF gives different tags to use then the door/window sensor ) So h…
-
Thanks for the replies... If i set the first card as "An alarm turned on Motion Alarm" - how do I know what is under the category of Motion Alarm? It ultimately doesnt solve the issue that not all alarms are motion alarms, but all want to have the …
-
Just installed my Neo Coolcam Sensors and all seems to be working well, except the option to have the LED show on movement... i have set this to on, but it doesnt come on... I have Homey set to announce when there is movement (for now) so I know it'…
-
Just to add to the above I have tried unpairing, re-pairing and installing with each of the three 3 different Door/Window Sensor device options and one of them didnt work (no battery reading) but the other two seemed to work fine but neither turns t…
-
I just bought this sensor - brand new 100% battery and just set it up. The tamper on mine is permanently on too... anyone able to advise how I might fix this? One thing I don't understand fully from the instructions is if one or both (internal / ex…
-
I found a good siren that scared the bejesus out of me, let alone the burglars! I'll probably keep it as a backup even when my siren (s) arrive (getting an internal and external)
-
Now that I have my Homey, this looks great... just gonna have to find some time to set this all up! I wish that Homey could implement this natively however... it seems many other companies have managed such (even down to Chinese companies like itea…
-
bvdbos said: https://apps.athom.com/app/com.athom.soundboard Awesome - thank you!
-
jorden said: vaderag said: I love the look of the Netatmo Welcome - the facial recognition seems great and reduce the false positives after time. I'm not sure how it will play with Homey tho and I think I'd need to know that before I s…
-
Nevermind, ignore me