This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
tunf
About
- Username
- tunf
- Joined
- Visits
- 20
- Last Active
- Roles
- Member
Comments
-
local logon is not working with my.athom.com offline, although this could be a firmware issue in 0.8.30
-
@robebar , thanks for sharing your respons. To clear out, i was a big fan for this product and think i'm the only one on this forum sharing his full experiance from start till now. This is not only including the technical experiance but also what it…
-
reinstalled the hue app and again i can control some lightning. It seems to be an issue that there are non philips lights in the hue bridge. Dimmable led spots are not reacting or turn on or off while they shouldn't The color hue lamps reacts about …
-
lots of falls positives after the update it keeps listning and think thinking it hears stuff. looking on the input there is nothing heard or strange words that haven't been said. It was great, with the latest update it is anoying.
-
Just played with audio, flow test starts playing music, no way of killing it. Beside that i created a flow where if mic hears muziek ask (tekst) afspelen en then play muziek. While i did this i used the text tag and homey asks me wat wordt het weer,…
-
It just finished updating so that is about 10/15 minutes (including boot). What i didn't tell you all is that my 2 kids almost (pfffff) rolled the homey over like a ball, i was just in time. After the update and boot the z-wave devices are all sti…
-
Another week has passed and finnaly i've got a litle bit of time more to play with homey. As there is a update i will try to get z-wave back to work again. in the mean time my battery's are in to add all door sensors and push switches (all z-wave). …
-
Today i made a big dessision. i'm not going to factory reset to get z-wave working. I will unplug homey! I've spend a lot of time but i'm not able to get things basic up and working. Flows mentioned in other posts are not all possible on my homey. …
-
@D , thanks! missed that one.... feeling much more happy now... will go test tomorrow again so all my whises can become reality
-
If Athom is open for suggestions i from wc eend recommand that they read my post https://forum.athom.com/discussion/1099/my-first-homey#latest my first homey. Lots of small and big suggestions there but after days of work 0, null, zero response from…
-
Desided to keep a homey free night. Tryed some wikipedia commando's. wait time for response or failure is about 20/30 seconds. Way to long in my opinion. Youtube by speach on homey itself is not working. Tryed using my remote without flow to see ho…
-
Just before closing my browser and laptop for the night i just saw that all smoke detecters are in error. Seems that all z-wave devices are no longer online while they are still powered. Error transmit_C and then the line stops. mmmmm now going to …
-
BasVanDenBosch said: tunf said: Also i can imaging that you can use the gui on a laptop / android or whatsover but if you read al my posts you must have seen that it is not possible now to create buttons or a dashboard or so. Y…
-
i tried some flows to get the ring in danger mode (nightrider is watching when i go to bed) ring can only go round not forward and backward, a nice to have in my opinion. I created 2 flows because i cannot use flow nesting/ grouping so i have the r…
-
doen't know, never have this experianced. I think it will lose speech as this is being handled in the cloud. That is why i opt for a top 10 highly used local store, so the top 10 of a period x commands are stored and handled local to provent major …
-
@erwinvrieze did you update to 0.8.29 already? i did not have any oops issues at all (ok, other issue) using hue with 25 lamps.
-
Thats another issue is also have but thanks for pointing that out. My issue is also that no light whatsover is going on or off. Because they use the hue bridge and not there own zigbee the not working hue lamps where a real sitback for me. I really …
-
philips hue
-
First freeze! It just reacted to lights on, i asked him to put the lights on, nothing, lights on woonkamer and the went on for 50% dimmed white. Ok homey, lights on keuken, White ring and nothing more. The white ring of heaven?
-
MarcelTimmermans thanks for your wikipedia explenation. It is here not reacting on gras but on a lots of others. Speech using ok homey, wikipedia one word seems quite stable, even from 9 meters away (silent and no tv or whatsoever turned on) ,today …
-
Thanks for sharing! Wikipedia never worked here, can you share what you did? youless and youtube, never worked here, can you share what you did? Rest about the same (read my post my first homey for the full cover of what my experiance was/ is)
-
Just one quick thing that i forgot; In the settings menu i choosed Dutch as language. A lot of info there is still on Englisch. Not only the apps but the whole Z-wave section, system section and parts of the led ring.
-
Ok, thanks for the support. Although you all want the information, i'm today on a point of frustration with homey due to its bad reaction. I moved it around the house last night to see how it reacts next to the TV, 3 meters away from tv, in the kitc…
-
Looks like my homey is also playing a game at the momet. it starts listing, sometimes tells me it will turn lights on or off but now it only 1 out of 20 is turning some lights on and off, Where to uninstall the randomizer?
-
I also had this problem but after a couple of reboots and try's it worked finally.
-
@scocz Was thinking about that but with a blog it is not possible to react like it is happing now and also not to point out all the issues and feature request. Athom already as a lot of places to find what you will need to get started and notify iss…
-
@rocadamelshe Toeval?
-
just rebooted homey due to the fact there is no voice at all being recognised for 1 hour now. After reboot it reacts inmidiatly again. Only thin is that it tells me it is turning lights off but the lights stay on. Strange!
-
playing around with the flows to create a fire alarm flow. Directly missing the OR function. if smoke detector 1, 2 or 3 or 4 etc. has smoke alarm and we are home or time is between x en y do action. This is currently not possible and a big missing …
-
also looking for this feature.