This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
thayoung1
About
- Username
- thayoung1
- Joined
- Visits
- 255
- Last Active
- Roles
- Member
Comments
-
Thanks @caseda and @Eternity. Looks like it's a possible use case. Now I have to put my money where my mouth is.
-
@caseda very nice you added support for the FGS-222. Question about it; Do you know if I can use 'when' flow cards with the FGS-222? I want to achieve the following; - When I switch my non-smart wall switch (which is inside the wall connected to …
-
@Reemster I'm also trying to make this work with my lights in the kitchen with no success. Lights go out when I'm moving. Will try to alter the default window time and Report results Back here
-
@JurgenHuijbregts by adding the logic panel within the toolbox on the left and drag&drop the Lux to it Just saw you found it... Maybe usefull for someone else
-
@tim1990 Chacon doorbell doesn't work with the Action App. Does yours have the letters CHACON in front of the push-button casing? And what does it say when you detach it on the printplate? Mine says QH-C-CE-3V, 09.10.16, A, Quhwa, SAW
-
Ok, should be nice. I'll try again tonight @tim1990 and report results back here. Question remains when the dev-tools for debugging / capturing signals are expected to be released (no exact date needed, just an indication).
-
Hey @Emile, any news on this one?
-
Seems like they did not test the Z-Wave Plus Fibaro Multi Sensor. Can you guys alter parameters of the v1 sensor? Was missing that too.
-
Still not working after the Z-Wave rewrite and Fibaro App. They can't seem to get it right. Should be a matter of quality assurance / testing but I think they don't test with hardware devices.
-
You're not the onlyone. I'm also having problems with this. Disappointed for now with the progress made
-
I know @phil_s, it's frustrating. I was also waiting a couple of weeks for this to start working again. But let's not jump to conclusions for now. Let's wait some time, maybe it starts working in a couple of hours from now.
-
Ok, thanks for the info. I'll leave it with group 1 for now then. Any idea how to force the update? Just wait the default 2 hours?
-
I'm also testing it. I also put the '1' in group 2 (for tamper-alarm) to look if this icon will appear. Can I force an update of the parameters after setting @caseda? Tripple pushing the button will make the sensor glow blue but I don't see any diff…
-
I did this mod. A couple of meters more range, still not satisfied but gotta live with it. Does the job for now. Thanks for the guide!
-
Same here, Homey isn't functional for couple of weeks now. Same problem with KAKU (no triggers). I also expect it to work again with the next release. Hope this will be released soon.
-
keverjeroen said: Solution for all Z-wave questions: IF Z-wave question THEN relax and just wait untill next update. AND STILL stress about KAKU in my case..
-
Any update about when triggers (Z-Wave Fibaro Multi Sensor & KAKU motion sensor) will start working again in flows? I've searched this Forum and github but can't find any good information about it. My Homey isn't being used without it for severa…
-
Or buy this kind of device http://bespaarthuis.com/images/product/image_62.jpg
-
Put a COCO wall switch between Homey and the Power supply and switch it off and on with a delay?Would that work?
-
@b.clevering I use my Hue 2.0 bridge in combination with my Osram RGBW garden spots. See this post.
-
@tim1990 no firmware update today, but as mentioned "Every Friday a summary of that week will be posted here." I expect there to be an information update.
-
Ah, well let's just wait for the new Z-wave software then. The sensors I'm using work right now .
-
Thanks for clearing that point. I misinterpreted your comment in this post. Well, I'll be using the HUE bridge in the future. Now let's hope Philips doesn't pull the plug again on 3rd party lights like they did in december 2015.
-
Thanks for your confirmation @JanH and @ZperX. Yesterday I received my Fibaro sensor with Z-Wave+. It's working. Only difference is that I don't see the 'Generic Alarm' and 'Battery' options. Any idea why? My Z-wave configuration;
-
I received the Osram RGB Gardenspots yesterday. They work out-of-the-box with my Hue bridge 2.0! . So no Osram bridge needed for these because if you have a Hue bridge. For now I like the Hue App over controlling my lights with Homey (voice & a…
-
I also have an APIR 2150 motion sensor and the range is very poor. Only a couple of meters. Dont know if it is Homey or the KAKU device. So mine is moved from the outside to the kitchen indoors. Hope it will get better later. Strange thing is that …
-
Anybody seen confirm push card working? Build 45 with 0.8.35 here, when testing flow i don't get any push notification...
-
keverjeroen said: BasPost said: keverjeroen said: How do I drag a existing flow in to a new folder? Open the Flow Folder with the triangle pointing down, drag an existing flow into it a little bit to the right, so the…
-
Did someone manage to get the Fibaro multisensor with Z-Wave plus (=not the old Z-Wave non-plus version) working correctly with Homey? I'm asking because I want to buy one but only if Homey is developed so far it supports the Fibaro sensor..
-
RobinVanKekem said: thayoung1 said: Homey firmware 0.8.34 with Android App 2.0 build 40: no devices in any of the rooms. Do you have an not working device? This could stop the devices in the app, so it appears. Thanks, wo…