This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
rockhoppers
About
- Username
- rockhoppers
- Joined
- Visits
- 331
- Last Active
- Roles
- Member
Comments
-
Very interested in this as will be buying one once it is supported. Quite impressed with the MCO stuff. Andrew
-
TedTolboom said: rockhoppers said: The MCO units do look good, but every comment i read talks about need a deep back box. I struggle with standard face plates as it is ! Andrew What is the depth that is available? …
-
TedTolboom said: rockhoppers said: Hi Ted, thanks for that. There is a spec designed for LED lights, has an "H" after the numbers, i.e. S312H, but can't seem to find them. I am right i thinking they do not offer a battery version …
-
The MCO units do look good, but every comment i read talks about need a deep back box. I struggle with standard face plates as it is ! Andrew
-
Hi Ted, thanks for that. There is a spec designed for LED lights, has an "H" after the numbers, i.e. S312H, but can't seem to find them. I am right i thinking they do not offer a battery version yet ? Andrew
-
have done so, but not holding out a lot of hope. Hoping he is still supporting his Lightwave app as i have a lot of the sockets and no sure if it is SDK2 compliant, doubt it. Andrew
-
Checked the apps.json file for this app and it appears not to be SDK2 compatible. Where would it be mentioned if it was, in the header part ? does this mean if i upgrade to Homey 2 when released and the app is not SDK2 compatible it will not w…
-
Just checked Github. appears no request for support has been answered since last Aug, is the developer still working on this ? Andrew
-
Eternity said: A nice solution would be if it would be possible to give flows 'priority' levels. Manual switched is thus always higher in priority than a lux based flow. is that even possible ? A
-
Ted, thanks for the update, all appears good so far. Did notice switches appear to be responding much faster. Andrew
-
Done, really confusing this one ! A
-
Have also just deleted and rewritten the flow. Same problem. Confused. A
-
This is what it looks like now. they all route back to Homey, but one PIR is still out of range and refuses to mesh to a local wall switch.
-
update appears to have worked, looks like the units are now thinking about meshing ! Or at least they show their route back to the hub, even through it is direct. The Human Body sensors still show a min of 60secs on the Motion Time out. This has sto…
-
Wired to the mains 240 volt supply
-
Xiaomi Mi ZigBee aqara wall switches mainly
-
Appear to be having range issues with Zigbee. It is not forming a mesh. Is there a setting that needs to be made for this to happen within the app ? got several wall switches that all connect directly it appears, but some don't respond due to poor r…
-
Yup, i am not getting anything like that. Not sure if the app has that functionality yet. Or should it just do it it's self ? Andrew
-
No facility to enable Router function as far as i can see. Is there an easy way yo rebuild the network? Andrew
-
Yes, some of them do have router status. 3 main powered wall switches. A
-
Understand, but this mean once triggers, it will not trigger again for 60 secs minimum. A lot can happen in 60 secs ! there got these as i could set it as low as 3 secs, so continuous movement like someone at the door trying to enter would result in…
-
for some reason now the reset time period on the Human Body Sensors is now a minimum of 60 secs, whereas before it could be set to 3 secs. Is this an app issue ? Can it be changed back ? I was using them to trigger stills from a camera also and don…
-
All going great with the app, many thanks for doing this and the regular updates. Can it be that the app remembers its alarm state after a power cut and comes back on "alarmed" if that was its state before the power cut ? Andrew
-
Say it is not compatible with previous version so are app settings will be reset. Does this mean i will loose my flows and settings ? Andrew
-
Update...... the "clear history" button does work, but not while i am looking at the app page ! Navigate away to another app then come back and the log is cleared. If the "auto refresh" box is not checked, and you navigate to the app page, the "ref…
-
"Clear History" button appears to have no effect on my system Could a function be added that clears out any history over say 500 lines (or a user defined value) to prevent the history log becoming to big. The "Papertrails" app does this by clearin…
-
All appears to be working. Noticed alarm trips quicker now i have installed RC11, good news. Andrew
-
Does this help any ? Also using 1.5.6. RC6 if that helps Andrew
-
Yes, when is uncheck the auto refresh box the updates stop. But when i leave the app, by clicking on the devices page or the like, and then go back to the app the box is rechecked. It is like it is not saving the change. Andrew
-
Don't seem to be able to turn off the "auto refresh" function. Anyone else noticing the same ? Another small issue (sometimes) the alarm does not seem to pick up motion from the sensors, not sure if Heimdall issue of Zigbee issue. Anyone else ? Ot…