This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
robertklep
About
- Username
- robertklep
- Joined
- Visits
- 23
- Last Active
- Roles
- Member
Comments
-
Just published v4.0.6.
-
@Alle just submitted v4.0.6 to the Homey app store, with which you can set the sensor update interval for TH10 and TH16 devices. Just have to wait for approval before I can publish it.
-
Alle said: robertklep said: @Alle at the moment, you need to change it through an MQTT message, there isn't a direct way of changing it from Homey (although I'm planning to add this as a setting). Let me know if you need instructions …
-
@Alle at the moment, you need to change it through an MQTT message, there isn't a direct way of changing it from Homey (although I'm planning to add this as a setting). Let me know if you need instructions (you'll need an MQTT client).
-
@Patrick1610 the Tasmota firmware confirms the state of the device after it has received a command to switch on/off. It's the confirmation that is used to reflect the state of the device on Homey. I think that the original firmware does something s…
-
@0burner0 dat is een bekend probleem van Chromecast apparaten: https://www.dutchcowboys.nl/technology/heb-je-een-chromecast-en-wifi-problemen-dat-is-geen-toeval
-
DrDoom said: @robertklep Spot on! Dat heeft het opgelost! Na aanpassen werd hij gezien door Homey en kon ik hem koppellen. Dank! P.S. Bij de pagina van je Sonoff app mis ik de knop om een biertje voor je te kopen.... Haha geeft n…
-
Nogmaals: uit de gepostte log blijkt dat het Sonoff apparaat probleemloos met de MQTT broker kan communiceren (en ook dat ie is ingesteld als "Sonoff Basic" module), maar dat de "Volledig Topic" ("Full Topic") setting niet-standaard is. Dat moet we…
-
@drdoom "FullTopicModule01/INFO1" is een vreemd topic, lijkt erop alsof je de "Full Topic" setting van het apparaat hebt aangepast naar iets wat niet-standaard is, en dan ziet de app je apparaat niet. Die setting moet je gewoon laten staan op de de…
-
Can you create an issue here: https://github.com/robertklep/name.klep.sonoff/issues (it's easier to deal with than here). Try and see if adding the device as a Generic Tasmota device works better.
-
Which device type are you adding? And which module is the Sonoff device configured to (in the Tasmota configuration)? Those two have to match. If they are the same, retry a few times.
-
Ah, you're trying to connect the Homey app directly to the device, which isn't how it works. You need an additional piece of software, called an MQTT broker, to act as a go-between between the device and the Homey app. There's a Homey-based MQTT br…
-
@mat_industries I'm working on support for the T1 devices as we speak, hopefully finished this weekend. This would be for the Tasmota firmware. There's an open issue on Github which you could track if you want to be informed when it's done: https:/…
-
@lunddorph and you're sure that the Sonoff made a succesful connection? Have you tried connecting to the broker using an alternative client?
-
@lunddorph are you sure everything you entered is correct?
-
@vaderag COM isn't an output, it's the connection that will get switched by the relay. The power inputs are only used to switch the relay, but they aren't passed through to the NO/NC/COM terminals. So you need to create an additional "loop", where …
-
Bij deze aangepast, verandering gaat mee met het toevoegen van de 4CH devices (hopelijk morgen klaar).
-
@DaneeDeKruyff from what I understand, your request was to be able to add tags to each device, so you can group them "manually". I think the question here is a bit different: the ability for actions to accept a tag that contains the name of a devic…
-
I don't think it's possible, but it sounds like it wouldn't be too hard to create an app that could provide this sort of functionality (I'd be happy to take a look at it). Question is: how would you identify the devices? Just by their name (which i…
-
Bij het pairen krijg je ook een melding te zien dat als het te lang duurt, je het apparaat uit en weer aan moet schakelen, maar misschien is dat een beetje onduidelijk geformuleerd? (overigens klopt die melding eigenlijk niet, want je móet het appar…
-
Ja okee, dát werkt nu wel, maar de verbindingsproblemen die je had en die nu kennelijk zijn opgelost kan ik niet verklaren, want daar heeft 4.0.2 niks aan veranderd
-
Oh uh beetje onverwacht, maar graag gedaan
-
v4.0.2 submitted for approval. v4.0.2 is published.
-
Okay, thanks, I know what's going wrong now. It will require a new release of the app, I'm afraid, but I'll try to push it ASAP.
-
@Undutchable62 can you open the developer tools (View > Toggle Developer Tools) and check if there are any errors being generated when you start a pairing operation? Screenshot is good too
-
@Undutchable62 I assume you're trying to install "Basic (Tasmota)"? Do you use the Homey app, or a regular webbrowser?
-
Die melding gebeurt bij wel meer apps, volgens mij niet problematisch. EDIT: ff gecheckt, en die melding krijg je altijd na een verse installatie van die app. Dus geen probleem.
-
Version 4.0.1 (beta) was just published to the Homey App Store, supporting more (Tasmota) devices.
-
Dat het instellingenscherm leeg is, komt door een bug in m'n app Maar het probleem blijft dat de Sonoff app geen netwerkverbinding kan maken met Homey. Ik zou bijna gaan denken dat er ergens in je netwerk een firewall in de weg zit.
-
Undutchable62 said: Webbrowser wordt geopend met het genoemde IP-adres. Zou het uitmaken dat de Sonof (nu nog) via 3.3V voeding verkrijgt? Nee, dat is hoe ik meestal de apparaten met de apparaten bezig ben als ik aan de app werk (3.3V v…