› ›
This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.

rickp

About

Username
rickp
Joined
Visits
319
Last Active
Roles
Member

Comments

  • Why would you want a code panel if the alarm can be controlled by precense 
    in Next step? Comment by rickp April 2018
  • @ddenouden IF a tag is detected THEN set boolean "person x is thuis" TRUE. (Or use the normale presence, depends on your flow setup) My alarm is build upon somebody being home or not, so the NFC tag marks me home and the alarm deactivates using i…
    in Disabling the Alarm when entering the home using tablet/nfc-tag/keypad Comment by rickp April 2018
  • This is/was a known bug. Not sure if it's fixed already. Tried the same with "if camera x starts recording sent a push message"  The trigger cards don't work
    in [APP] Synology Surveillance Station for Homey Comment by rickp April 2018
  • vaderag said: I've now got a siren wired up to a 12v power supply that works when perpo is sent to it. It's glued into an external professional siren box. The only reason it isn't up yet is I want to find a uninterruptible power supply that ca…
    in Outdoor Alarm Siren Comment by rickp April 2018
  • mikron said: First remove device from zwave with 3-clicks on the b-button. After that add new device with 3-clicks on b-button. Tried this? https://www.youtube.com/watch?v=I097Kb5p3OI
    in Unable to add the Fibaro Wall Plugs Comment by rickp April 2018
  • Rocodamelshe said: But, u wanna run the flows from 1700 when Homey comes back online at 1900? Is this relevant to the question? Not quite sure what the use case would be but if for example you turn the light on at time x to act like t…
    in Do homey check the flows/devices? Comment by rickp April 2018
  • fke1964 said: fke1964 said: ik heb 2 van deze sirenes gekocht (type 2). Ik dacht ff aa de bel flow koppelen en hij doet het. Jammerrrr zal wel weer een studie worden. Moet ik deze als bel met een flow aansuren of zo want ook daarmee lu…
    in Outdoor Alarm Siren Comment by rickp April 2018
  • honey said: Totally agree. To make it really pro I would add these as well: - Battery - 3/4G connection - Wired LAN connection Would be nice to have a longer range Z-wave too and IR receiver what is not blind if the LED ring is on. @Bram @Em…
    in Are there plans for a “Homey Pro”? Comment by rickp April 2018
  • tnx for your feedback. I also haven't found any alternatives so as for the alarm+nfc tag at the entrance is a no go. I'm currently looking into a combined combination of GPS and wifi connectivity through iftt. With the hidden off button that should …
    in Disabling the Alarm when entering the home using tablet/nfc-tag/keypad Comment by rickp April 2018
  • Normally my alarm switches by geo and i use my app if that fails. In case of a empty phone i can also use a nfc tag on homey self as backup. The tag marks me as home and then al the normal flows start running based on this.  Note: i have a hardware…
    in Disabling the Alarm when entering the home using tablet/nfc-tag/keypad Comment by rickp April 2018
  • phil_s said: @rickp that doesn't work! was also reported somewhere in the formum and i just didn't get it to work. then you suddently have from all devices you have push mails that a sensor not reported. what definitely is not right. i used th…
    in [APP] Heimdall - Let Homey watch over your home. Comment by rickp March 2018
  • phil_s said: sorry when this question was already mentioned, but this thread is very long... is there a possibility to check all sensors of my alarm mode if they are full functionable? so do they respond? because most sensors are battery drive…
    in [APP] Heimdall - Let Homey watch over your home. Comment by rickp March 2018
  • Did you manage already?
    in Fibaro dimmer 1 Comment by rickp March 2018
  • If the delete fails like this most of the time you need to add the device again before you can retry to delete it. Even if it is already in the device list you still need to re-add it before you can re-delete it! Should be fixed soon.
    in Issue with Homey for DOS Comment by rickp March 2018
  • Sounds like you have only 1 lead. This works for a regular switch. brown in switch, black out switch to light, light to blue.  You need to pull wires or place the fibaro next to the light. Leave the old switch on or make a permanent connection betw…
    in Fibaro dimmer 1 Comment by rickp March 2018
  • Do you know about https://apps.athom.com/app/com.uc.heimdall ?
    in Most efficient flow for multiple (11) occupancy sensors read out Comment by rickp March 2018
  • Would be great, however i would be going with MbenzNo's solution of putting in multiple dots. However i'm still waiting for the full Dutch intergration with custom hotword. Just found something about google might be making that possible. Since they …
    in Alexa/Google Assistant directly on Homey Comment by rickp March 2018
  • Bij je flow 1 begint de denk fout. je draait je zandloper als er beweging is...maar als de beweging niet stopt, doordat je heen en weer loopt of meerdere mensen aanwezig zijn of door wat voor een reden dan ook, zal je zandloper leeglopen en dus je 2…
    in forse happeringen in Homey flows Comment by rickp March 2018
  • Rocodamelshe said: Mag ik ff tussendoor vragen hoeveel apparaten bij jullie de "mesh" verzorgen? Dus hoeveel niet-batterij gevoede Zwave apparaten? Hier 3. 2x fibaro plug, 1x fibaro dimmer, wel gelijk door het huis verspreid.  op batter…
    in forse happeringen in Homey flows Comment by rickp March 2018
  • Hoi canedje, Ik zag je topic en volgde deze ook nauwlettend omdat het een groot raakvlak heeft met het probleem dat ik als eerste merkte, het tegelijk uitzetten van het hele huis. (zie 1e posts). Dit heb ik voor lief gelaten omdat alleen de KAKU mo…
    in forse happeringen in Homey flows Comment by rickp March 2018
  • Ik kan je helaas niet helpen met het verdwijnen van je gegevens. Ik heb hier een tijd mqtt op homey laten draaien, samen met owntracks. Homey was dan dus zowel de server als de client. Dit werkte bij mij stabiel, misschien is het een poging waard om…
    in Locatie met own tracks Comment by rickp March 2018
  • bvdbos said: Hoe zijn de instellingen van je sensor? Als je de sensor bij iedere beweging een signaal laat zenden dan is dat vragen om problemen, zowel het zwave-netwerk als Homey raken dan verzadigd met signalen. Daarvoor heb je een time-out o…
    in forse happeringen in Homey flows Comment by rickp March 2018
  • RuudvB said: Misschien iets waar (nog) niet naar gekeken hebt: loadavg Het kan best zijn dat jouw homey gruwelijk druk is terwijl je denkt dat hij staat te niksen. Ik heb gemerkt dat dit heel veel met flow-logica te maken heeft. Ook het aantal…
    in forse happeringen in Homey flows Comment by rickp March 2018
  • Not sure if this is Heimdall or Fibaro. Only just noticed this. 15-03-2018           08:28:53.707      woonkamer sensor tamper: No more tampering detected 15-03-2018           08:28:53.621      woonkamer sensor motion: Geen beweging gedetecteerd …
    in [APP] Heimdall - Let Homey watch over your home. Comment by rickp March 2018
  • bvdbos said: rickp said:Also tried that one but our phones (Galaxy / huawai) don't like it. Multiple away/home changes while we didn't go anywhere.  Anyway, what settings do you use? and what phone('s)? I have a fairphone-2, works a…
    in Hue precense Comment by rickp March 2018
  • Ik had in het begin de maximale blindtijd van 8 seconden en een beweging aan van 15. Omdat ik hetzelfde vermoeden heb gehad heb ik recent de beweging aan tijd veranderd naar 35. Ik zal dit ophogen naar 60 om te testen, dan zou de zandloper (90) nog …
    in forse happeringen in Homey flows Comment by rickp March 2018
  • Vandaag een update gehad van 1.5.3 naar 1.5.8. Ik had goede hoop maar helaas.. Nog steeds komen de signalen wel bij homey binnen maar word de flow niet correct uitgevoerd. Node[19]: [COMMAND_CLASS_SENSOR_BINARY] {"Sensor Value (Raw)":{"type":"Buffe…
    in forse happeringen in Homey flows Comment by rickp March 2018
  • Here it was 10-15 mins. purple dot starts small, gets larger, then reboot and done
    in Homey 1.5.8 and 1.5.9 Comment by rickp March 2018
  • bvdbos said: https://apps.athom.com/app/nl.terryhendrix.smartpresence works perfectly for me. But depends on the brand of phone. You can always use multiple apps/flows to assure the correct status is set... Also tried that one but our p…
    in Hue precense Comment by rickp March 2018
  • i asked homey for the update and it asks me if i want to install. He doens't respond to yes by speaking or through the app. How did you do it? --- bypassed by unchecking auto updates
    in Homey 1.5.8 and 1.5.9 Comment by rickp March 2018