This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
nicor
About
- Username
- nicor
- Joined
- Visits
- 41
- Last Active
- Roles
- Member
Comments
-
Same error here on the Fibaro Double Switch 2.
-
Ok great, so it will be fixed in Fibaro App v1.0.17? ETA?
-
Regarding the release note of the Fibaro App: - FGS-2*3It's only possible to use Switch 1 (S1/Q1) because of a bug in homey, Switch 2 (S2/Q2) can't be used yet. So, when is this bug going to be fixed in Homey?
-
Not sure if it's already posted or mentioned. Planning to buy a few Aeon Labs Z-Wave Repeaters to improve the Z-Wave range quality. I've noticed that the repeater is supported by the Aeotec App so that's good. Any experience with using Z-Wave repe…
-
caseda said: @nicor what is the distance you hold the FGS-223, within 1-1,5 meters? It is a pretty old bug which should be fixed/work better in the next upcoming homey update Still have the same issue after updating Homey to v0.10.0…
-
Trying to pair my Fibaro Double Switch (FGS-223), it's stuck at "Setting app-specific association groups...". Removed the switch a couple of times and tried re-adding. No luck..
-
@caseda If I'm correct the FGRM-2x3 isn't supported in v1.0.9 right?
-
Still struggling a lot to determine a stable Z-wave mesh, fully based on Fibaro. Homey's HEAL function seems to do it's work overtime, but still some blind spots occur. I know that Domoticz and other controllers support this function by displaying a…
-
Thanks @caseda , appreciate your effort.
-
@caseda ; Here you go: nodeInfo { "manufacturerId": { "value": 271, "name": "MFG_ID_FIBARGROUP" }, "productTypeId": { "value": 515 }, "productId": { "value": 4096 }, "deviceCla…
-
@caseda I can help, if you tell me how to generate the right output.
-
Sorry to push. When will the FGS-2x2 and FGS-2x3 be available in the Fibaro App?
-
@caseda the FGS2x3 do exist, with zwave+. http://manuals.fibaro.com/content/manuals/en/FGS-2x3/FGS-2x3-EN-T-v1.0.pdf
-
Just bought myself a FGS223, will it differ much from the FGS222, from code perspective?
-
I'm not expecting a detailed report, just a short note
-
A progress report would be welcome at least..
-
@MennoVanGrinsven Would be great if Homey supported the Over-The-Air software updates for devices with OTA capability. But then, Fibaro has to publish it's firmwares..
-
@Ziglar I see that you only have Group 1 associated, My multisensor has an association on all 3 groups by default. Maybe that has something to do with it as well?
-
Ok. My findings after a night of sleep, think that would be enough for Homey for a HEAL proces - Motion Sensors are responding but delayed, sometimes even 5 to 10 seconds when I receive a notification on my App. - Smoke Sensors in the same room a…
-
Installed my entire Fibaro setup today (4 Smoke Sensors, 2 Motion detectors, 2 Flood detectors and 4 Wall Plugs within the same room), no pain at all, everything worked fine. Moved the sensors within the house, keeping in mind that the Wall Plugs ar…
-
Thanks @caseda , that did the trick. I've 4 Fibaro Smoke Sensors active, what would be an efficient flow to actually send out a notification based on the smoke alarm. Right now I've 4 identical flow's configured based on each sensor.
-
After resetting Homey to Factory Default, and pairing all my Fibaro devices it seems that the Wall Plug, Motion Sensor (ZW+) and Smoke Sensor (ZW+) are working. Although the Tamper Alarm of my Flood Sensor stays activated.
-
Still confused why debugging from the Fibaro device (Plug, Smoke Sensor and Motion) doesn't give me the right status about the connection to Homey (Routed or Directly). Known issue?
-
@JeroenVollenbrock - That's exactly the post which confused me about Homey being able to HEAL. Also when using the Z-Wave test function on my Fibaro devices (Even when in the same room as Homey) it's not indicating a direct or routed connection. No…
-
So if I'm not mistaken, Z-Wave routing is not implemented (Yet). @Robin Any news on this? Still can't get the Fibaro Motion Sensor (Z-Wave +) properly working, no problem in detecting and pairing the device. Pushing advanced settings like turning o…
-
I assumed pressing the B button one time would wake up the device, I was wrong... RTFM Waking up the device did the trick..
-
I've got two Fibaro Zwave devices at the moment, the wall plug and multisensor (5th gen). Changing the advanced parameters on the wall plug is working very well. But if I try to change the advanced settings on the multisensor, like the led color for…
-
No luck after updating my Homey to experimental version 0.8.35. Guess it's better to wait for the Z-Wave rewrite.
-
Just paired my 5th gen sensor on my Homey (0.8.32), works like charm. Seems I cannot change any advanced configuration parameters on the sensor. Sounds familiar? Here are my settings.