This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
mauriceb
About
- Username
- mauriceb
- Joined
- Visits
- 1,047
- Last Active
- Roles
- Member
Comments
-
msmits said: Hi guys, First ... wind. @msmits Nice work!
-
msmits said: mauriceb said: jorden said: That OpenHab thing looks useful, although I'm not familiar with OpenHab and it might be hard to get the code out of that massive package. I'm not currently at home, but can someone tur…
-
jorden said: That OpenHab thing looks useful, although I'm not familiar with OpenHab and it might be hard to get the code out of that massive package. I'm not currently at home, but can someone turn on their Horizon, find it's IP-address in th…
-
@MarcoF That would be great. Also check this post. I also have a SoapUI project with the functions I have found already. And here is a thread on the Philips forum.
-
@techniman In the description it's mentioned in the "Kosten" part: Eenmalig €49,00, per maand €0,00,-. De maandelijkse kosten zijn nu niet van toepassing daar we als Vodafone aan een nieuw product werken. Zodoende geven we bij deze huidige ver…
-
@RikBenIk I just noticed the same when I tried adding my Chromecast audio which ended in an error invalid_capability.
-
@caseda I noticed the same. My device showed up when I did a power cycle except it was invalid and the Unknow Z-wave device was still there. I did a Z-wave network reset and added the RGBW controller again got the invalid device error and did a pow…
-
@caseda Hehe mbrouw is me.
-
My RGBW controller is added as a basic device. It only support switching all on and off. No RGBW separate channels or any other controls.
-
ErikVanDongen said: mauriceb said: ErikVanDongen said: mauriceb said: Is it possible to do a POST with the following body: {"notification":{"powerstate":{"powerstate":""}}} and putting the result {"powerstate": {"powe…
-
@ErikVanDongen Send you pm.
-
ErikVanDongen said: mauriceb said: ErikVanDongen said: mauriceb said: Is it possible to do a POST with the following body: {"notification":{"powerstate":{"powerstate":""}}} and putting the result {"powerstate": {"powe…
-
ErikVanDongen said: mauriceb said: Is it possible to do a POST with the following body: {"notification":{"powerstate":{"powerstate":""}}} and putting the result {"powerstate": {"powerstate": "Standby"}} in a Better Logic variable? I t…
-
Is it possible to do a POST with the following body: {"notification":{"powerstate":{"powerstate":""}}} and putting the result {"powerstate": {"powerstate": "Standby"}} in a Better Logic variable? I tried figuring out the Node HTTP options but do no…
-
@MarcelKuijper I am also pretty new to z-wave but this thread did help me: https://forum.athom.com/discussion/1288/how-to-z-wave-devices/p1
-
@Rocodamelshe Are you aware off the API documentation: http://www.developers.meethue.com/philips-hue-api You need to register to read it but it describes every detail. To my opinion this is one off the better API documentations. Also the hub conta…
-
@Tim_Brass I just checked the variable I created a few days ago and it is indeed not being updated. Seems that the flow is not triggered. You can create an issue in Github.
-
@Tim_Brass Just checking I also created a flow based on the Humidity changed and it saves the variable value as 37%. @Hellhound Bug?
-
Tim_Brass said: The humidity does not seem to work. I've set the humidity as a variable. (when humidity changes set variable) but the variable doesn't change. (shows 37% all the time) @Tim_Brass Did you check if your humidity changed us…
-
@HellHound I have an issue with the settings screen: The blue line is my account email selected. I opened an issue for this on Git.
-
HellHound said: mauriceb said: I just ordered 3 Smart Radiator Valves in order to create separate zones (Living room/Bathroom). You can order them now with a 20% reduction using the code Multizone20 On which site ? @HellH…
-
I just ordered 3 Smart Radiator Valves in order to create separate zones (Living room/Bathroom). You can order them now with a 20% reduction using the code Multizone20
-
@Demolitionben there is already a topic: https://forum.athom.com/discussion/11/controlling-a-central-ventilation-system-with-homey
-
HellHound said: @mauriceb Thanks, can I add this to https://github.com/hellhond/be.geekness.tado ? @HellHound Offcourse. Perhaps you make me a contributor so I can update the document as I find new services.
-
@HellHound I updated the document with the service to set the Tado modes. When ever you have questions or need help just send me a PM.
-
@HellHound I have been busy putting my SOAPUI test into a Word document. Could you send me a PM with your e-mail? Never mind, see attachment.
-
You can check your JointSPACE version, in my case 5, by turning on your TV and opening the following websites: * http://your-TV-ip:1925/system * http://your-TV-ip:1925/1/system * http://your-TV-ip:1925/5/system Have fun testing.
-
I turn my Philips TV on by using a CoCo remote as follows: * By using the Wake on LAN app I activate the JointSPACE server on the TV. * After 10 seconds, JointSPACE server needs some time to wake up, by using the HTTP request flow cards, I send th…
-
@HellHound Nice job! I have been "reverse engineering" the android app and figured out how you can create or claim an app user and set whether it is relevant for presence detection. I already have created my own Homey user. If you are interested p…
-
I created two flows so Homey can tell me the inside temp by a push of a button: Flow 1: SayHomeTempStep1 When... Button pushed then... Get variable step 1 * URL: https://my.tado.com/mobile/1.9/getCurrentState * Query parameters: ?username=m…