This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
kasteleman
About
- Username
- kasteleman
- Joined
- Visits
- 4,201
- Last Active
- Roles
- Member
Comments
-
BTW fixed the description for the ZMNHDD1 on github
-
Ronald, you did not run it from the command line instead of install? The dialog box refers to the service button on the back of the module, not the switch botton. Something is wrong then with the association groups. Red rectangular is not ok. Can yo…
-
You are using multi instances i asume. Be aware that al instances show a settings page if you have implemented those, but only the main does allow these settings to be applied! So it can be the case that if you apply settings on a instance the app c…
-
Would like a time-out for the push notification. Like if not confirmed, go on within the flow Or did i mis a solution for that scenario?
-
RobertLijkendijk said: kasteleman said: RobertLijkendijk said: I am using 2 Quibino dimmers here as well, if needed I might be able to help you with testing. Do you have Type numbers? Yes Qubino Dimmer ZMNHDD1It…
-
RobertLijkendijk said: I am using 2 Quibino dimmers here as well, if needed I might be able to help you with testing. Do you have Type numbers?
-
Webster said: i am busy with the powernode 1 got it working exept power measurement do you have some code?
-
Ronald_A said: Not on slack, sorry. I have no sensors attached at this moment. Most important feature of the qubino flush dimmer is the ability to dim my GU10 COB Led's from max till 1% and the ability to change the "Dimming time when key pres…
-
@Ronald_A : are you on slack?
-
@Ronald_A: That should get me started. Btw, no tempsensor attached?
-
Skorpion said: I have 2 Qubino flush shutter DC modules, but I don't own a Homey yet, so I can't test. Device name: Qubino Flush Shutter DC ZMNHOD1 Type: 0003 ID: 0053 Ok, specific settings that you use, that are listed in the manual?
-
@Ronald_A sent you a pm Need module nummer, device id and device type to get started
-
Anybody using qubino devices? Building a app for my 2 devices (qubino flush dimmer 0-10v and flush dimmer non z-wave plus)
-
jeroenbos22 said: Got a simple ITHO box with a perilex connector always running on speed 1 and a COCO AWS-3500 for controlling speed 3. Connected to my Homey and works like a charm! Nice way to go! Personally i go for the z-wave solution…
-
kasteleman said: @BasPost Don't know for the Itho. You have to take a look at the print. On the stork (zehnder) it is default there (seperate kabelterminal present and labeled with 12V, 0V and 10V) Do you already have a qubino 0-10V fl…
-
Then enjoy the learningcurve
-
I would wait 1 or 2 days until the Greenwave app is released
-
@tim1990 there is a new version of the kaku app, but it requires the new firmware version that osn't released yet. Maybe that wil solve it.
-
djesko said: Just need support for universal binary sensor then i can move from hc2 to homey 100%, any eta on that @Athom? That can take some time, but maybe the community can add it. The source is on github and Emile challenged the c…
-
Indeed, but you have to wait until the new Homey firmware is released
-
kasteleman said: Robin said: HansieNL said: @Robin: is the app gonna be released soon or is it still in test? App is 'finished', waiting for testing by Quby/Eneco and production API credentials. And now w…
-
Robin said: HansieNL said: @Robin: is the app gonna be released soon or is it still in test? App is 'finished', waiting for testing by Quby/Eneco and production API credentials.
-
mickeynygaard said: Hi Still haven't heard anything here...Please help me out Athom! Have you send a email to support?
-
It does not exist! You kan buy fibaro dimmer for example icm with right wall switch. Have a look at the fibaro documentation because also the type device that you want to dim is important
-
This morning updated my Toon to the latest software, so now awaiting the app...
-
@GeurtDijker : AWST-8802 is working? I can not use the AWST-8800. Only difference is single cq 2 button remote
-
Hmmm stil on 3.3.8 and not yet update available...
-
@Robin Do they have to distribute a new firmware towards the Toon devices in order to support it?
-
Hmmm, first time i have troubles with a KAKU device: awst-8800 (single wall switch with timer). It is recognized , but Homey does not react when the on or off button is pressed. My doorbel KAKU and a socket switch are working just fine
-
Dountill said: Got this message after adding 2 thermometers At first that is ok, until the first temperature is reported to the gateway and then picked up by Homey.