This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
kasteleman
About
- Username
- kasteleman
- Joined
- Visits
- 4,201
- Last Active
- Roles
- Member
Comments
-
Paired 5 of innr gu10 spots with my hue bridge 1.0 in about 5 min. Can control them with my hue app on my phone or with the hue dimmer button
-
Why do you need a app fir the lc13?
-
needed some GU10 HUE white spots, but if you need 5 pieces, that's a fix investment. But now i have GU10 Innr spots attached to my hue bridge. They work just fine. I know they differ in lights with the orginal hue's but are on sale in the gamma shop…
-
PimBliek said: I don't think Homey has a spare USB port so it should be an Ethernet Gateway.... (or WiFi). I currently use a serial gateway connected to my Vera. Will start building an Ethernet Gateway to play with first... Just build th…
-
@Arjan can you give the exact model, just for compleet info for other users?
-
@Emile don't know the productioncost and understand you want to make Some profit out of it to keep the company runnung
-
Phuturist said: kasteleman said: @Taco Do you have published a list off the implemented command classes including the version? It's on Trello: https://trello.com/c/AtTVVVu2/41-z-wave-command-classes Am i missing something…
-
@Taco Do you have published a list off the implemented command classes including the version?
-
And hopefully shipment is before 0.99.99
-
Taco said: No offence taken. I'll have to think about that but currently I'm very busy with the remove node issue. Of course that has more prio! Understanding, because the device itself can be used en the sockets can be switched
-
hmmm fingerprintsensor.....
-
Taco said: Ah I found it. It's in a higher version of the command class then I have implemented at the moment. @Taco Does this change the planning? Still going to be a z-wave app, or is command_class_meter_v2 going to be implemented? For…
-
Nice teamwork, isn't it?
-
Taco said: Nope. If they do send the value with the meter command class they differ from the Z-Wave standard. And again, that figures. The greenwaves are indeed very exotic.... in other words, not a quick fix available? @Taco if you ne…
-
Taco said: Yes, because gas and water isn't implemented, power is @Taco ok that figures. Do you only check index 0 of the meter class? My open zwave states that the kWh reading is in index 0 and label Energy. On the other hand the Watt …
-
Taco said: The meter command class is implemented and is used to read the kWh. For the current power usage per socket Greenwave doesn't use the sensor command class so I'll have to investigate how to fetch that information. @Taco did i m…
-
Perhaps set the polling again now that they are properly reachable in the network.
-
Phuturist said: Right, silly me (I'll blame a bad night sleep if someone asks ... ). I guess it would require something running on the laptops itself or a network ping to it's IP addresses to determine if either one is powered on and the z-w…
-
I don't get it. How can you switch it back on if the power measurement is higher? You switched it off, so how can it draw power? That is the use off switching it off? Unless you want to switch another socket based upon the powerdraw of another socke…
-
Phuturist said: I came across this information. Might by useful for @Taco when he has some time to troubleshoot the polling and the display of the actual power usage per socket. There are 2 types of polling of listening devices (the GreenWave …
-
TarikFaik said: And the aeon gen5 That is zwave plus and thus supports controller shift as stated by aeon labs support, because that's a zwaveplus standard.
-
Phuturist said: My guess is the polling parameter isnt working then. The green light parameter has been set correctly and does indeed suspend the flashing with 255 minutes. But if Homey does not communicate with the socket within this 255 minut…
-
TarikFaik said: I want to shift zwave so that open has can be master but if I Klik on controller shift in Homey and present my aeon z-wave s2 noting happens? As said many times before: unfortunately the aeon s2 does not support controlle…
-
-
@Phuturist In my current config setting the parameter and enable polling interval below that parameter value, it works that way and never any green flashing. That is as said before in a open-zwave config with a aeonlabs Usb stick (old one non zwave …
-
@MilanVanDenMuyzenberg Did you enable polling?
-
@Phuturist I don't know the single socket one, but does it have a wheel like the 6 socket one? Mine 6 socket one was very picky in that mather. It only accepted the configuration of the interval after configuring the wheel parameter and then turning…
-
Phuturist said: Ok, I dug into this and have figured it out. The official documentation doesnt mention it but thank god for open source. I ran into the Greenwave library from OpenHab on GitHub and it already has Greenwave specific configuration…
-
Reinier said: @JurgenVanDeRijke ; Thanks for your feedback I'm currently working on some stability issues. it looks like i've fixed the problem. Just for the record, the specific Somfy issue or also the KAKU?
-
@Phuturist Does this entry in the open-zwave xml config file help you to set parameter within Homey: After how many minutes the GreenWave device should start flashing if the controller didn't communicate with this device