This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
jimmy_zeropm
About
- Username
- jimmy_zeropm
- Joined
- Visits
- 232
- Last Active
- Roles
- Member
Comments
-
Well my conclusion is that my Homey is completely unresponsive. I've worked on about 20+ flows that were allmost 100% responisive and now NONE of them work. Maybe @Emile can give some more information about this problem now more and more people are …
-
Update of my situation. I had some poor wallsocket results. I replaced Homey several times and checked the behaviour. Once I found a way that all three sockets performed I changed the sockets to other places. Most of the times that worked good somet…
-
I have the same issue.
-
Well, I'm not in this as a developer. I'm in this as a pro-sumer. So I'm not gonna develop stuff or anything. I backed the project based on what was promised, based on the movies that were posted with bright future plans. So why would we have to com…
-
I second that request. This was one of the primary promises far before Homey was actually produced. I backed the project for this. And als Athom says; "Homey connects all things, so it also connects all your music platforms to all your speakers. Th…
-
Well Lubbert, thanks for your support. But the string just didn't came up when searching. And then there is this in the newsletter of Athom I received yesterday; "Homey connects all things, so it also connects all your music platforms to all your s…
-
Still trying to get some better results. After rebooting Homey and resetting the Z-wave I'm struck with only one working socket. They all do appear in the graph but only one works. And only works with on/off, no additional data. Could this be a faul…
-
@TedTolboom I have 3 plugs and one Fibaro motion sensor, which is working very good. I also see in the log that device 6 is creating traffic. That is (I think) because I've altered the update interval to 60. And is it correct that my motion sensor i…
-
Well, I've managed to add the third one succesfully. Somehow it worked in one attempt... But now all sockets aren't working anymore. They just don't react. Is this because of the mesh that is rebuilded? I will wait one day maybe that helps, it did l…
-
@TedTolboom I'm still not able to add the third socket. I can reset the device, but it still flashes yellow after the triple button is pressed instead of blue/red. Only after a reset to factory settings the plug flashes the blue/red combination but …
-
Since I had some serious range problems with the powerplug I owned I got the advice to add some more zwave devices. So I ordered two more powerplugs at Gearbest. They were delivered but with a 50 euro customs fee (including a DHL ripoff share). So n…
-
Since a few days I see that my luminance insights are quite different. They seem to be go from high to low but that isn't the case. Like this picture. Anybody who can confirm this?
-
@RuudvB, so I can try to add a fibaro one and mix things up? The battery powered fibaro motion detector won't do because it's battery powered.
-
I have besides the neo one Fibaro motion sensor. How can I add or create a mesh? When looking in the network diagram I do see the motion connected to homey, and so the socket.
-
Today I received a neo socket. Installing to Homey went easy and at first everything looked great. But... when I changed it to different sockets it seemed to have an awfull range. (5 meters with no walls at best) and from all the on/off commands onl…
-
@Rocodamelshe from the tag section! But I see now, I accidentally clipped a Hue spot temp tag in the flow... I think that happened because I didn't expected that and therefore worked to quick oops... That must be color temperature... I have changed…
-
@Rocodamelshe this is the flow; I did not wake up the sensor before no, I just let it sit over night so it would wake up automaticly.
-
Good to see we have dedicated topic on this nice little peace of hardware. I've also made a flow like the one from @MrDutchfighter, but it's not as I wish yet. What I have done is setting te lux to 8, so it triggers only when I'm coming home and the…
-
Since a week I have a motion sensor. But since a few days the temperature isn't logged or send and it keeps saying it's 20,4 degrees. Is there any explanation for this? See my charts;
-
Is there any development on this one? My homey constantly reacts on ok from the tv or radio. No voice training, Englisch setup.
-
@ingmar I've seen that but I think the horizontal thickness of the range is much more flat then the image shows..
-
I've found some interresting outcomes with the sensors motion detection range. I've marked the sensor in 4 even parts on the outside. I then turned the sensor bit by bit over his axis and suddenly I gained 2+ metres of detection range. I repeated th…
-
I'm also not sure about the temperature correction, and updates... If you look at my charts you see that the lux are nicely reported but the temperature is not. It is set to be logged. When you look at the temperature on it's own it looks like; B…
-
Here's my input; [2017-03-10T18:19:39.913Z] ProcessSendData[661]: To node: 3 with data: 0x9880d1ea4195228f7cd8 and txOptions: ACK,AUTO_ROUTE [2017-03-10T18:19:39.935Z] Node[3]: Received application command for COMMAND_CLASS_SECURITY, data: 0x40 […
-
@ingmar I do, I see this coming back very often in my logs. Could this has something to do with the short blink I see on the sensor. Iow, when motion is detected there is a long blink, and sometimes I see a very short blink..
-
How do you guys experience the range of the motion sensor? I moved it to several places but BEST is 3-4 meters.. I wanted to use it's range to cover two entries in the living room but now it seems I have to buy two more sensors.. Bit disappointed...
-
It worked :-D. Thanks!
-
I can't get the lux setting working. What I do is; When - The motion alarm turned on - The Luminance changed And - Logic Lux Tag = less then 200 Then - Set a hue scene. But it keeps saying "only one trigger per flow is allowed"
-
I'm trying to create a basic lights on coming home flow with the fibaro motion sensor. The sensor is pointed at the frontdoor / hall. So what I basicly trying to get done is when somebody comes home, the sensor knows with the lux meter if it's dark …
-
I've added it yesterday. Then removed it because the handshake didn't go well. The re-added it and now it works fine except the motion detection range. I've relocated it to a ceiling but it hardly detects more then 3-4 meters. Settings are adjusted …