This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
fuzzybear
About
- Username
- fuzzybear
- Joined
- Visits
- 1,140
- Last Active
- Roles
- Member
Comments
-
Nice find just ordered one thanks
-
Webster said: Manufacturer ID 0x0099 does somebody know how to convert it to a id that homey knows i cant find device id information if somebody have it please let me know i will give it a try to make a app Maybe you can use this ..…
-
Here also turned off for the last. Month. No point in using something that is not working (zwave) as it should do. Only irritates and brings negativity into your life. I have faith in Athom and know that they.are doing the best they can to gat to a …
-
jorden said: @aloft Make sure you disable polling and then try to run it via the CLI. If possible, only run the disable or enable card; that way I should get just as little information as possible, since the app really outputs a LOT. If you ca…
-
Plex now supports Sonos. https://www.plex.tv/blog/plex-sonos-better-together So the question is will we be able to play a song via the plex app to our Sonos speakers?
-
fiek said: jorden said: Does it work if you directly use the IP? http:///web/powerstate?newstate=0 (replace with the IP of the settopbox) Tested it but it doesn't You can use a direct IP with the http app as suggested her…
-
KoenMartens said: I have the strangest thing. For the last 2 nights, around 4:50 AM, the app indicates that I 'came home' (judging by the time of the notification I got). My phone did not turn off, and was charging next to my bed. Any idea? …
-
When looking at the data sheet there is an active area of 0.04 mm2 with a narrow half angle of 10 degrees see here http://www.embedded.com/print/4398904 for explanation. In turn this would not require a very large hole as long as the IR is in line …
-
Omg I hope Athom have a patent on their housing design. It looks very similar
-
Could this: https://www.npmjs.com/package/samsung-remote Be used with homey to help create an app?
-
Bumblez said: larsmachiels said: At my work they completely redeveloped the information system. It took them seven years with a huge team of developers, coders, software engineers etc., costed over 25 million USD and it is still not wo…
-
I wouldn't complain so much about communication or how the product is working if you compare this to other home domotica controllers. If you could just take a look how Fibaro and Vera were when they started and how long it has taken to become stable…
-
@HarmStellinga I have worked out the format for the http get card using the explanation from Erik in the app description. Couldnt make any sense (cheese) when googling json validator. I now use the following in the http get card: First block = htt…
-
Thanks Erik missed the instructions in the App Store and don't know the first thing about json let alone json validators. But I am here to learn so thanks for the pointers. Will look this up tonight when the kids have gone to bed.
-
Just made a quick test with my ET10000 (Extrend Enigma 2 sat receiver). I have managed to change the power state using the following: http://dreambox/web/powerstate?newstate={powerstate_number} * 0 = Toogle Standby * 1 = Deepstandby * 2 = Reboot *…
-
I have also a Byron BY35 push bell, just tried connecting it with Homey but it is not recognised. This is also 433 Mhz but with digital coding these push bells can be paired with the bell chime by pushing the appropriate button. It would be great if…
-
Having problems here after adding my Homey as a 2nd controller to my Fibaro HC2. After a restart it appears that there is a port or something that is getting blocked as I cannot connect to my Homey via my.athom.com even though my router shows that …
-
Maybe something for the future for Athom to enable two languages in the user configuration
-
Would it be possible to allow the trigger to be in English and the output in Dutch if both languages are installed?
-
woei said: fuzzybear said: Just when I have a internet interruption here guess ill have to wait or connect through my mobile. I can put it on 1.44 MB floppies with ARJ, its just under 13 MB. You can pick 'm up if you like. …
-
Just when I have a internet interruption here guess ill have to wait or connect through my mobile.
-
Now i have received the homey i realise the choice for the positioning of the cable. In this position it runs neatly over the table when exiting the casing. It's just necessary to bend the cable slightly so it does not push the homey off of its feet…
-
jorden said: Currently, I have the file base64-encoded in javascript. So I can possibly just push it with a command: new Buffer(data.data.imageData, 'base64') That is, ofcourse, if they allow that if I need to provide an URL or file path that…
-
Hmm, doesn't work here, does your homey have a thermometer added or is it using a zwave device?
-
@jorden Just tried this with a flow to take a snapshot and record on the front cam and another flow for the back cam and finally a flow for both cams together all work flawlessly. So this is a great start and multiple cameras are not an issue
-
Cool just worked out how to install, this from the athom cli. I have now connected to the NAS and added both front and back cameras. Just need to add some flows to test them. I will leave this till tomorrow as I don't really have any triggers for th…
-
Brilliant, can't wait to test this, have been asking and waiting for Fibaro to support h.264 for several years now, which they still have not added. With Homey it takes less then a week