This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
cbh
About
- Username
- cbh
- Joined
- Visits
- 1,283
- Last Active
- Roles
- Member
Comments
-
No ideas at all? Or: Anyone who knows if the Qubino/Philio modules might be included in the apps in the future?
-
Have re-arranged my flows... As suggested, one Boolean variable has been discarded and the new "or"-option made it easier to keep the variable inside the limits. Probably a deeper knowledge of the possibilities in json could make the calculation of…
-
As I understand it, a native part of the z-wave-protocol is, that nodes missing in the system will be marked as missing in order to establish the best routes in the mesh - and that's kind of it. Non-mains powered deviced has a special status, as the…
-
After this epiphany regarding the diversity in use of powerbanks I've read this post with joy. @RamonBaas: Just a thought: How does the RAVPower unit affect power consumption? Like, if the charger is inefficient, the cost could increase to somethi…
-
@RuudvB I totally agree with you - wiping etc is a very unattractive solution - however, long delays are as well... I'll give it some time - perhaps it will sort out :-)
-
@TedTolboom: And now I understand the rationale, why I should have followed the advice... And powerbank... So simple, yet so far away when stuck on the wrong side of the transformer ;-) @RuudvB: I think the learning curve when automating your home …
-
Hi again, I went analogue and have read most of the book "Z-wave-essentials" and I think the answer is pretty simple - but the impact of using the "wrong" method is considerable. Each (mains powered) z-wave node store which other nodes are "best" w…
-
Suggestion: Your app is pretty close to the "Virtual devices"-app... Don't know how much work it would be - but perhaps the options from that one could be integrated in yours - and woops - two apps were reduced to one :-)
-
Have two Yale Doorman and use the Verisure's app to control them. Would be nice if it could be integrated (to a certain degree) in the flows - e.g. notification about unlocked door and alike. Haven't got the skills to develop an app - but would defi…
-
@LJSVV: Thanks :-) You're quite right - it's a tricky bit as well. I've tried using both the Remotec Remote and the Logichome ZHC-5010-switches with this flow and "discovered" (read: been told by someone as I didn't understand it) how the z-wave sta…
-
Definitely a hit! This should be native in Homey!
-
Do you have (need) the Logitech Harmony physically - or do you just use the app and the requests mentioned above? Don't have a Logitech Harmony - but if this can be a workaround, the app would be on my Homey within seconds ;-)
-
Trying to implement "Sets" as it without doubt can simplify a lot of things related to if and who is home or not. However, some extra examples could be very helpful - anyone else who can provide some examples? Promise to publish my results when sati…
-
Hi, As I mentioned in another thread yesterday (https://forum.athom.com/post/quote/3565/Comment_56596), the problems I had were solved by re-installing apps everywhere - and it works like a charm now. I think deleting the devices at the "profile" wa…
-
Initially the native geo-location in Homey was awful, but after removing and reinstalling the app at the iPhones in question and deleting and adding them in the account settings in the Homey-setup, it has worked like a charm - initially I used the S…
-
This is actuality what I did - and the result is as described: some of the last added nodes have a very central role in the mesh - even though they are placed far away... Not sure if I understand the last sentence you wrote - do you mean, that the …
-
Might be timing asking questions not related to the 1.5 update - but is it really true nobody have an opinion on this?
-
Lost connection to all Fibaro Dimmer 2-modules after upgrade...
-
Nighthawk X6 R8000 :-)
-
Not trying to hijack - or only a little, at least: https://forum.athom.com/discussion/3486/dimming-variable-the-perfect-flow No ideas from people yet - perhaps it is the perfect flow already? ;-)
-
lubbertkramer said: cbh said: Made a post at their forum - join in and put some pressure on them :-) The link you posted is forwarding to an article about Alexa, please provide the correct link If you scrolled down to c…
-
Made a post at their forum - join in and put some pressure on them :-)
-
My "bedtime-flow" looks like this: When I place my phone in the dock (connected to the PN-6 in the flow) it triggers a flow shutting down the house for the night. However, if I just forgot to set the alarm on the phone or whatever and release it fro…
-
@DieterKoblenz: Have you tried the z-uno with Homey?
-
Definitely not a good idea to ditch the window interface and go only for iOS/Android ui! As others have mentioned, designed complex flows on a small touch screen will be cumbersome unless you make a seriously cool ui - however, I doubt it is possibl…
-
Removed and re-paired the PN-6-sockets - helped quite a lot on the delays. However, still have the strange behavior when adding new components: Goes through a cycle of pairing, not succeding, removing, pairing, and after a 3-4-5 times through this …
-
Will do so in the future - move Homey to the mountain ;-) Haven't changed anything on the PN-6's. Could try to remove and re-pair them, when on their final location one of the days, if they are not "sent" to a more peripheral role in the system aut…
-
Removed it from totally and rebooted to see what would happen - only one association to be re-assigned, when adding it again later. Definitely changed something, now I could even add another component - and units are reacting within 1/2 of a second.…
-
archarmboot_idcpus[{"model":"ARMv7 Processor rev 10 (v7l)","speed":996,"times":{"user":9375700,"nice":7857600,"sys":18525000,"idle":127881500,"irq":0}}]date2017-07-01T15:17:59.472Zdate_dsttruedate_humanSaturday 1st July 2017 17:17:59devmodefalsefree…
-
Homey Firmware Version: 1.3.1