This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
caseda
About
- Username
- caseda
- Joined
- Visits
- 5,158
- Last Active
- Roles
- Member
Comments
-
Ik zei ook niet dat je de config file moest aanpassen maar de app.json. Config file kan wel, maar dan moet je eerst "composen" na de aanpassing. Na inclusie moet je hem aansluiten op de kraan (mits nog niet gedaan), en dan op de boost knop drukken…
-
Als je weet hoe de app.json te veranderen en via cli te installeren, dan hoef je alleen de id 3 in de array toe toevoegen bij "productId" van de spirit driver (regel 1256) Word dan dus [1, 3] Zal ik het later officieel aanpassen na wat onderzoek ho…
-
@Eternity Hmm, je hebt een andere product Id dan ik gewent ben van alle thermostaten die Eurotronic heeft (3 vs 1). Zou je hem eens willen factory resetten? (dit gebeurt niet met het verwijderen vanuit homey, zoals normaal verwacht met zwave) Je kan…
-
Tkb app creator here. The TKB 3 in 1, and 4 in 1 are the same device in the case for tkb. And have implemented everything with the 4 in 1 in mind, so it should have the contact capability. Can you give a screenshot of the mobile card (overview wit…
-
En feature request is natuurlijk altijd welcome op de github pagina https://github.com/athombv/homey/issues
-
I don't think there are even (wireless) dimmers in zwave nor zigbee that are instant, even the hue dimmer (buttons!) via their own bridge takes about a second or 2 to even start dimming, and then dims in steps of 6-8 or so percent, not fluent. Most…
-
that depends on the code used in apps/drivers, some are harder to create (fibaro rgbw) then others, where only 10 lines of driver.js/device.js code is enough thanks to the new and improved z-wave library doing all the repetitive work.
-
All 3 id's can be an array, even the manufacturer (for some reason) That was changed not too long ago
-
I guess that is indeed a parser thing, as 0 can be seen as null (no value) or false (0 = false, 1 = true), and thus not be parsed (IE: `if(value) { parse() }` will not parse when not specifically assigned as number). You could add both, so 0 and 000…
-
That is not possible in the way homey works currently in the gui, might in the new app athom is working on, but not very likely. you could work around it by adding a virtual device/scene, and couple that in a flow to a hue scene
-
@keverjeroen Just so you know (without looking at the log, not easy to do that on my phone) those aren't an hour off, gmt is being used for time in the log (can also be named zulu, see the `z` at the end, but that is more a military standard/name)
-
Are you using the preview version of the app? as this app also adds another phone option if not, you can see all your phones you added on the my.athom.com page, on the top right side of the page under your name's menu
-
Look at the awesome things athom made for us https://developer.athom.com/tools/signals
-
https://github.com/athombv/node-homey-rfdriver That's all you need since this came out (I think), the rest is all outdated (sdk1)
-
Ik zie alleen ontvang commando's, en dus geen zend commando's vanuit homey, maar dit kan ik zijn omdat je (waarschijnlijk) hebt gefilterd. Als het echt alleen deze signalen zijn is kan het 2 dingen zijn, los contactje op de relais module of schakel…
-
Als ik het geld ervoor had gehad had ik meteen alle kranen in huis voorzien van de spirit, zonder enige twijfel tussen de andere merken (lijk wel een verkoper zo) met hoe snel bij reageerd enzo, op het moment heb ik er maar 1 (oa gebruikt voor te te…
-
The dimmer 2 has a "force dimming level" flow card for this use case
-
Als het alleen om de thermostaat kraan te doen is, is z-wave en zeer goede optie, naast Devolo en Danfoss is er ook nog de Eurotronic thermostaat kranen, zeker de nieuwste (Spirit) die in staat is om constant te luisteren naar signalen zonder teveel…
-
Pretty much all (in wall) dimmers use PWM the only dimmer I know of that doesn't is the qubino and kaku 0-10v dimmer. Though they don't work on mains power, since the size would be too big for in wall usage.
-
Your fan is most likely not designed for control with PWM what the dimmer uses for fan control. The bypass is only meant if the power rate is too low with for example leds, so that won't matter at all. Don't have any other options that I can come u…
-
@home78 @quakerix The NIF is send via routing devices, but homey asks for way more information of the device then just the NIF during inclusion, which is the major cause for failure on larger distances. (but it can work) The heal command is send b…
-
Battery devices can't route anyway but even if it is a powered node, if a signal fails for 3 times to get an acknowledge back, it will timeout (and thus not use) for some time on that device route.
-
An unknown device is a "failed to include completely" device and is not active in anyway once it is reset, that there are connections just means the device is known to the other devices it was nearby on inclusion and is in their neighbouring table, …
-
But if you are going the aeotec wallmote route, be sure to order the new version, as the old version has a bad hardware error, not fixable with a firmware update. only see able difference is the line in between both bottom 2 pads is rounded at the …
-
@ingmar: full "dictionary" for zwave is public: http://zwavepublic.com/specifications Mind you, in total it is about 2000 pages. Currently there is no build in way to retrieve current state of parameters in homey settings, have been waiting for a b…
-
I guess you haven't read about the "going (full) to mobile" things going on at the moment. For all the reasons you name now. Try searching the forum, enough about "homeydash" and "new mobile app"
-
Still missing a nice color and light temperature selector But is really starting to look nice now!
-
It still happens massively, with the reason for "how to get people to choose for us". Though fibaro has opent up a bit in the last (half) year. For some things they just won't, maybe yet. Just look at gaming consoles, prime example. Might try to d…
-
I have yet to see any notifications for the battery in any of the battery devices, fibaro has with the smoke sensor z-wave plus version, 2 options to send it in, and haven't seen both of them. maybe hc has some magic that they hold back from other …
-
@LuukvD there is also a dutch section on the forum, so if you only are possible to post in dutch, please do it in there. But if you do it in english the posibility to be helped is greatly increased. for now i'll move it to the dutch section