This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
caseda
About
- Username
- caseda
- Joined
- Visits
- 5,158
- Last Active
- Roles
- Member
Comments
-
@JosStultjens it had indeed updated in 1.1.5 version (was only few minutes before 1.1.6) I've updated the readme as well in my next (upcoming Tuesday 20th in the evening) pr which includes with: For @ all: FGS-213 AND FGS-223 scene activation flow…
-
@djesko yes i did thanks so much.!
-
@djesko I cannot, it's completely "random" when apps are being checked if they are good enough. It can be today still, but also up until end of this week (or even later if sickness is causing delays)
-
@Count_B I have not fixed the fgs-213 yet, it's not the end of upcoming week yet
-
@djesko it can be the soundbar, since most of the time there are/is a permanent magnets in them, sometimes pretty strong ones. Television won't cause much interference unless you have one of those big-butt ones but that little unlikely
-
@djesko unless it sends multiple commands per 10 seconds, it won't do much
-
@djesko you probably already did it, but just to know for sure, did you reboot homey yet? If that does not work, do a PTP for several minutes
-
I think they choose the wrong name after seeing that last video... Since then it's more like, Your Overly Attached Girlfriend My feeling says "Japanese only" for the first 10 years though, my japanese is not good enough for that
-
@MartijnDeRhoter ; no it does not matter, it is the way the usage is being calculated, so it shows "properly" in your homey (Wattage and kWh) with LED the default should be the best option for your situatie (actually any situation i can think off..)…
-
@Robbertos The range has not been updated in this version, might happen in future versions, but don't expect too too much from that. try putting a powered z-wave device in the middle to "guide" the signals to homey (creating mesh grid)
-
@MartijnDeRhoter i have never heard of the dimmer 2 trying to turn on LED's several times, does it always happen or only when you switch the manual switch or only when you try to turn it on with homey? you can try to activate the debug and side lo…
-
@djesko i did put a magic re-filler link into the readme file
-
@blusser ; is it the z-wave plus version of the window/door sensor? if it is, then look at your association groups, and put homey's id into group 1 (you can leave it in group 3 if you want, doesn't really matter) that should fix it
-
got to love settings
-
@Robbertos try resetting both wallplugs either through homey: Homey's settings -> Z-wave -> [Remove a device] Or in the wall plug itself: Hold button until led glows yellow, release button the press it shortly again, and the LED should glow r…
-
Da_JoJo said: i re-added my dimmer 2 module and it puts homey id 1 in all groups, any particular reason for this ? afaik it should only be in the controller group. Reason: because Robin (athom employee that goes over the zwave drivers) …
-
it probably (most likely) needs an app created for it? and now is included as a Basic Device which only can have 1 on/off switch.
-
@glijie the flood sensor was never fixed? not by me anyway, and since it's a driver problem (90% sure) then it really needs to be fixed in the app itself first but like i said before, without the device itself it's pretty hard to debug it. the wa…
-
app did update, you will need to do 1 of these 2 things though: 1 re-pair the device, or 2 put homey's id (mostly 1) into association group 1 (you can keep the id in group 3, but it's not really necessary)
-
@eternity ,hmm that would make more sense, true Well, then we have to break the news, it's not possible through mic like disco app does. since athom won't let developers read out raw microphone data (privacy reasons I guess.) might be possible wh…
-
i've submitted the fix to athom's github, now it only needs to be accepted and submitted into the app store (no ETA possible to say, can be tomorrow, can be 3 weeks)
-
RSL is on 433 mhz so it might be possible to add it working to homey. but don't expect athom to add it, they can't do that to every protocol/device that is out there. (way too small company for that) you will have to be reliant on the community to…
-
i've put the update (1.0.0) of the TKB Home app for acceptance in the app store. Changelog 1.0.0: Update Z-Wave driver (1.1.0) Fixed TZ65D right button flow triggers, and status update(s) on hardware changes Add support TZ66 (Single & Dual) Add…
-
It's just that this post was about the Fibaro Universal Binary Sensor. (FGBS-001) even though it uses the same temperature measuring modules, they are not quiet the same device . And that is also what i thought at first you were talking about "the…
-
so cool that you found a door/window sensor to be a binary sensor (they not the same though ) there seems to be an issue with the temp sensor for the window/door sensor already, have not looked at the issue yet, will happen soon though, quiet busy …
-
there is a flash function build in "blink the light (short)"/"knipper de lamp (kort)" and "blink the light (long)"/"knipper de lamp (lang)", couldn't be more obvious.
-
@YvesGeffens that is why there is a "Heal" command, to update that internal table with neighboring devices. @BasVanDenBosch it is possible to include through mesh, but the fail rate is 95+% because the data transfer from and to sensor is so big.
-
It's removed since may 2016, or something like that so yes it was removed, long ago (it was only used for "ok homey" anyway, not all speech)
-
whoops read the question wrong my bad could still be an option though..
-
Unknown Bugs