This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
caseda
About
- Username
- caseda
- Joined
- Visits
- 5,158
- Last Active
- Roles
- Member
Comments
-
@HansieNL i have a feeling, but it's hard for me to try out since both of my buttons works, even though still with too many battery reports. my feeling is that the button is not reset properly by homey's reset frame (what happens when you exclude) …
-
@anne there has been nothing changed for the wall plugs in the app for some time now that could cause this. the physical button isn't even send to homey, it switches the relay inside on default, even without being added to a controller. So that no…
-
RGB-WW just means it's the Warm White version, so there is no change in color temperature possible, it is just implemented this way so you can actually dim the white LED and or turn it on/off the RGB with color temperature bulbs are not supported y…
-
for the people with a Fibaro Button (FGPB), 1.1.9 of the fibaro app wil fix any issues with it, but you will have to re-pair the button to homey. if you have a hard time to remove your button follow these few steps: restart the app, wait until the …
-
@DenW hope you mean the TZ67 is added in the upcoming update, still busy with last changes on a new driver before submitting it to the appstore
-
Where do you see there are going to be beta testers for other languages? the only thing athom said about german languages is that it will come somewhere in the first half of 2017, the rest is all community with options they like to see happening.
-
@JanH true the WU app needs to convert it's number tokens, to real number tokens (this has changed in 1.1.2 to have 3 different tag ways, number, string and boolean (true/false)), now they are unspecified which makes them string tokens which don't …
-
@Count_B just remembered something that could also be te case.. are you using the main device as device with S2 scene cards (the right switch's device does not work, have stated this in the information icon, but hey, people hate reading right? ) ne…
-
the temperature is probably really below 2 degrees celcius (that is what the AND card is checking, and not what the value is showing on the tag of the trigger cards).. the trigger (IF) cards and AND are 2 entirely different cards and ways to trigger…
-
i see all checkmarks, so why isn't it working?
-
it was not possible to have the real values there, that why the "automatically generated" value is there, it is a pre-determined value by the creator. this was exactly like the way before, but know the user can use their own value to test it more e…
-
it shows you the tag information on the trigger card you are using. before you had to guess the values, which caused more confusion then results when testing a flow it even allows you to change the values to have an easier testing way and it will s…
-
@mauriceb have it closer to your homey (or homey closer to the switch)
-
@HansieNL well that not only depends on me of course but if i wasn't as blond as i am, then i would have had the PR ready 10 minutes ago.. almost done though
-
@Count_B ah that explains it, it only works in the latest homey version (1.1.x) not in previous versions as something changed in the z-wave core for this. sorry only experimental at the moment @HansieNL i found the issue and am working on a fix a…
-
@HansieNL i am not sure yet why the button is not working yet, that is next on my list of why is it not working anymore since it's not central scene i at least crossed the core out for possible reasons (for 90% could still be that it is a differen…
-
@Count_B i have not tested it in 1.1.x version of homey and this fibaro update, i'll take a look today, even though it should work properly might be something in homey since the Button also is not working anymore. (they use the same Class for this…
-
use this link to activate all topics again: https://forum.athom.com/?ShowAllCategories=true
-
@Rozz in 1.1.0 (homey FW) you can use the dimming capability better for all dimmable devices. @RobinVanKekem i updated the driver for the PSR04 to better handle the global tokens, and also fixed the issue you mentioned in the git that i only just…
-
Just tested the new app. needed to reinstall all devices (kinda obvious) otherwise it wouldn't trigger on app level -> scene changed. on deletion of my hubs (in the new app) it crashed the app: Stack trace: TypeError: Cannot read property 'clien…
-
@DenW if it is the same situation as the TZ68 (Z-Wave Plus), which it most probably is, then it's very easy to add. i will only need the node information in the generic device's settings.
-
@PacoS You can find out your self by just trying it out, if the device is supported it will choose the right driver for you, it's mostly because of how to activate learn mode on the device, this is all the same for Wall plugs. If it isn't supported…
-
you don't need to add the parameter, it is on by default in homey. but i'm not sure what your situation is, you are trying to control a dimmer 2 (at the lamp) with the other dimmer 2 (in the switch), but to trigger that dimmer 2 you are using a sin…
-
if 3 times just won't work try keep pressing the button rapidly (more then 3 times) until homey found the module
-
you need to press the button 3 times within 1-1,5 second, which is quite fast, there is indeed the possibility it turns on or off, but that should not matter
-
either remove is from Homey's settings -> z-wave -> [remove a device] (like @JurgenHuijbregts already told), the device does not have to be included in homey for that, it will just initiate the reset command. or the wallplug itself by holding…
-
App 1.0.0 has just been released in the app store. Enjoy! If you do still find a bug or improvement, don't be shy to report it. I won't bite (hard at least )
-
i'm not from athom , but i do know more, it is purely for drivers: "defaultConfiguration": [ { "id": 3, // parameter number "size": 1, // 1, 2 or 4 "valu…
-
@blusser the device doesn't send an alarm frame to homey, but a basic set frame. (thats what I did to the driver when it wasn't working add support for basic set command) This will (should) be routed by the zwave mesh
-
@glijie your flood sensor should work now as well (thanks to @RobinBolscher (athom))