This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
caseda
About
- Username
- caseda
- Joined
- Visits
- 5,158
- Last Active
- Roles
- Member
Comments
-
@Mister.Green do you have the beta version of the sonos app installed?
-
it will be supported in a different way pretty soon (upnp) the upnp is in development as we speak, so only an app based on that core is needed to be created. (or the original app changed to that way) it already works with upnp core devices, if you …
-
Nodon devices work in broadcast mode, and just send the signal everywhere without waking up fully at all. and thus also don't support any neighbor table. fibaro device it probably is a battery device? and was asleep when the initial get all neighbo…
-
Actually there are 3 core modules, yesterday evening they launched the real initial app org.upnp on github. And it already worked with my heos speakers but still in development, early fase without any icons etcetera
-
you need to press the B button 3 times, or switch the switch that is attached to S1 3 times the app is only looked for in one of the last steps, not right from the start, so it can't be the app
-
No, zwave plus is the version 5 of the zwave protocol, where the "normal" zwave is version 3. Frequency is talking about the mhz it is sending on, this is different for different parts of the world. Not sure if there is a frequency on the box, or …
-
Zigbee is the protocol, all different classes, are different way of signals, comparable with people having different jobs. Where "people" = zigbee and the jobs are the classes. They are all software based Zigbee has no full official standard way h…
-
If you are sure it is a tz66(s) but includes as a motion (+window/door) sensor, then there is something terribly wrong with your device It is based on 2 id's of the device, and they are both completely different Sensor: product id: 2, type id: 2 Sw…
-
You want bad communication? Try asking fibaro a question, you will get response if it is a simple question in 4 weeks, maybe a little over. I currently still have a quite technical question open without any response after 6 weeks and 2 days... And …
-
It can take 2 seconds after pressing the top-left switch part Do you have it within 2 meter of homey and are you able to delete the device from homeys settings -> z-wave? If not, were/are you able to add more zwave devices to homey? If you c…
-
@marclu Try resetting it manually once (hold the 2 bottom buttons) If that does not work, on which step does it timeout
-
and it does flip the boolean when you test the flow?
-
Looking at the data line then it should work just fine for you. 03 = hexidecimal -> decimal = 3 (Scene Notification) 2f = hexidecimal -> decimal = 47 (= amount of scenes coming in since last reset) 03 = hexidecimal -> decimal = 3 (= Key Pre…
-
I made a small mistake in the driver for the TZ66 which makes the app crash if you have this device. (the reason why i did not spot the issue before sending it in, since i do not have this device.) already fixed it but can't seem to send it in to at…
-
could you look into the z-wave log in the settings if there comes in anything when you double press
-
using the double press at least twice a week so it's not the app's fault. (and has been implemented for a few months now) you say goodish for pressing once, so not every time? then it's probably a range error or didn't you change the settings to mo…
-
@OKHomey79 It did not succeed, it is now implemented without until I have answer from fibaro, but almost seems like they don't want to answer (now almost 6 weeks later) The setting of the local security is not a problem (signals was send properly …
-
@white_shark the some parameters is/(was?) old information since it didn't have percentage control of the rollershutter, which it does now, just not updated in the readme file. FGRGB-101/FGRGB-321 is a false (or old) naming of the real name part i…
-
@Franq please read the o so gracefull note in the software update athom posted: https://forum.athom.com/discussion/1430/software-status#latest with addition of this extra note: the order does not matter you put the words in the 'When something sp…
-
Seeing only a security message come in (according to the screenshot, was waiting for a screenshot like that ), it can be a lot of things, but most likely something in the core that needs te be changed/fixed. so might take a while for it to be fixed…
-
App Update 1.0.3 has just been submitted for approval. this will fix the right switch for the people that it didn't work for (anymore) make sure you read the changelog about the change and what you need to check. (association groups) Also updated m…
-
just for the people that complain about having a minute or 2 difference, i have a tablet under my screens that is 90% of the time 1 to 2 minutes earlier then my computer's time also have a tablet on the wall across the room, which has the time even…
-
It is not a small issue, it is an issue only a few people have. They have been trying to fix this issue ever since it was found a year ago, even causing another bug trying to fix it. Just because it's the date, doesn't mean it's a small issue. …
-
The driver has been updated since then, but possible that no flows would trigger, but that is always the case and something you definitely don't want to rely on fully at all.. What if homey is the cause of the fire and can't do anything to notify y…
-
Could you guys look into the zwave log (settings -> zwave -> stuff for geeks) what message comes in on homey for the smoke sensor (the data part is the most important)
-
@Eternity just start "adding a device" and add a hue device (even if you don't have one left) it will ask you to push the button on the bridge, do so so it logs in, and you can close it after that. and all is fixed again
-
athom is already working on an upnp app/making it more easy to make upnp apps that are compatible with homey music not fully sure what the end result is at the moment, but looks very promising on github
-
already have something that can do all that and more, i call it a mouse.
-
Manufacturer 277 = zwave.me
-
this is not possible inside homey (yet), the only things homey can ask back by default is a yes or no question or asking for an exact password. it is possible, but only if you made an app for it, since developers can add such a (specific) question …