This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
caseda
About
- Username
- caseda
- Joined
- Visits
- 5,158
- Last Active
- Roles
- Member
Comments
-
@billywhizz mi-light led controllers them selves use a different frequency then homey supports, so a direct connection to LED controllers is not possible. You need the wifi bridge. You can see the wifi bridge purely as a remote (like the 1 they sh…
-
@konradwalsh The API key is not implemented yet, there is no ETA homey version known. It's pretty hard to implement, and still make is save for the end user. and also not the highest of priorities.
-
Let wel op dat er een kleine vertraging kan zijn omdat om het moment de laatste gedrukte knop van de dimmer word gepolled elke 7,5 seconds. (dus een maximale vertraging van 7,5 seconden) maar de bridge kan inderdaad komen te vervallen zodra homey's…
-
You can't control a DC motor with the rgbw controller, it doesn't dim from 12 - 0 volt. But uses a method called pulse width modulation (PWM) this turns on and off the power very quick, so the leds are only on half the time when adjusted to 50% But…
-
@basd i'm not @kasteleman but that module is already supported by the app in the app store. Qubino can be that the id's have changed with an update of the module, then please make an issue on github with a screenshot of the id's in the device's se…
-
the only z-wave module that i know of is the qubino ZMNHVD1 (0 - 10 volt dimmer). but have no experience with it, it is supported by homey. have used the kaku version as an LED dimmer, but the 30% lowest dim level... (which makes more a 3 - 10 vol…
-
you can try to include it as an AWST-8802 they probably work exactly the same, the only difference is that one is for outside as for the AWST-8802 is for inside
-
hmm the match crash is not from parameterize itself it is caused in the driver, i guess "hubInfo.uuid" is either empty, or something is there which it can't convert
-
reverting to parameterize 0.0.6 did fix that issue, never mind it crashed again on the match.. at least i did not receive that crash before i fell into this one after turning off all devices with my remote: TypeError: Cannot read property '20090…
-
@Eternity might have updated the parameterize module too far, i'll try this evening when i'm home to downgrade or see the version that is actually needed for the module where it is being used for. since i have the same crash it will be easy to find…
-
well, you can add another AND card with "if someone is home" in the sun rise trigger flow and if there is no AND card then there probably is a global token for it. and you can use the logic card
-
how difficult? putting in the code isn't that hard, but now put yourself in the shoes of the support people, when users can individually choose everything to be disabled. Then something goes wrong, user accidentally disables an option they didn't w…
-
homey can not be included as a secondary controller, athom has never put any classes for that in homey. might happen in the future, but is way, way, way down the list since it does not benefit them, especially since they are a main controller them s…
-
noticed that the IF cards of the app are still there, but have a rather generic name (same as the hub device triggers them selves) just an option to maybe make it more apparent that they are different, people before already mis noticed the app and t…
-
maybe update the dependencies as well ;p included all modules after removal of all modules, and made sure they use the latest version, morgan and the harmony client have update since the dependencies list "dependencies": { "harmonyhubjs-client"…
-
after installing the express AND the debug module afterwards, it installs properly. though now i have the feeling there are way more modules then needed after npm installing the express module
-
hmm, combination of the security issue and no ack in between that is a first one for me but i guess i haven't seen all logs from everyone. almost looks like homey is saving a lot of send data still on harddrive when it is too busy and after that r…
-
The only thing the last update does is fix an issue for the smoke sensor plus, the rest of the app is untouched. it probably is a domino effect that was activated by an app that takes long loading (the fibaro app). but to see what really is causing…
-
@Jeroenvano is it really hanging? or is it just processing lots and lots of data. and restarting the micro controller doesn't restart the z-wave chip, only the 433 and normal 868 chips, so rebooting that shouldn't make any difference with homey ha…
-
volgens mij gebruikt ziggo horizon box geen infrarood maar een radio frequentie voor zijn afstandsbediening, dus word het toevoegen wat lastiger, misschien zelfs onmogelijk, weet niet hoe open hun web service is voor derden. je kan naar elke toeste…
-
@Tidus_X als je het slim genoeg vind hij sochtends aan gaat kan je natuurlijk gewoon een standaard (slimme) tussenstekker er tussen te doen, en die aan te zetten sochtends. een klik aan klik uit of action stopcontact is al genoeg daarvoor. Enige w…
-
@Peke did you put the API token in the app's settings? (or also the Bearer Token)
-
RX (receiving) is only available for devices that are in the database, you can work around it by searching for a device that is already in the database and remove all known buttons and learn your own ones in that button overview window Personal sit…
-
@jjtbsomhorst then you probably also didn't read that the flow manager is IMPROVED in version 1.3. and also my note that they are going to LOOK INTO better usability for touch screens.. if they have time. hope you guys really try to create an GUI …
-
@dejongj then i would like to challenge you to write a GUI that works responsive (adept the view to the screen it shown on) AND works with a touchscreen where you move cards around with sometimes variable sizes of information in them. I don't see m…
-
@dejongj That is 2 entirely different world, working with touchscreens and/or responsive design. touchscreens is really hard to develop for since there are so many different signals send by the touchscreen itself, and is really hard to calculate o…
-
@jimmy_zeropm lets ask the proper question here @TedTolboom , did you include the socket as socket with a light attached? that has no power reading in the mobile card yet, will come in homey version 1.3
-
take a look at the candy app: https://apps.athom.com/app/info.matjaz.candy
-
@rtna there are 5 known people now that have this issue, you are the first one where it reappears though. should be fixed in 1.3 (which is now in developer preview, and probably reaches experimental channel next week)
-
Z-wave uses a different way of dimming which increase the range you can dim with almost 2x (can go way lower in intensity), and are a lot easier on your eyes. but has the down fall that most dimmers that are out there were not created with LED(s) i…