This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
caseda
About
- Username
- caseda
- Joined
- Visits
- 5,158
- Last Active
- Roles
- Member
Comments
-
CC ALARM has been renamed to NOTIFICATION from version 3 and on, that is probably why
-
Dan probeer je router maar eens te herstarten.
-
Als je naar je datum kijkt (Settings -> Systeem -> Stuff for Geeks) is de datum dan correct?
-
@Eternity Maybe you should try to use the correct app 's cards when calculating Logic is not ( != ) better logic
-
@Eternity you can't use a tag in the name input, you need to type it
-
The hub itself has indeed no "standby" mode, and that has never been the case. Must be something else you did to turn the hub to red.
-
ze staan gewoon in de lijst:
-
You can't put 2 trigger cards in the if column, even when they are the same. There is now a trigger (in the "devices" card) card which has a card called "alarm triggered", and you then can select a zone and alarm type
-
This is not possible yet: https://github.com/athombv/homey/issues/1530 https://github.com/athombv/homey/issues/1295 But have seen a small indication that athom is working on it as we speak so might be fixed in the next homey update (or the one afte…
-
Do none of the buttons work? You only show the right switch, but what about the left switch? You don't have the flow disabled? Does the lamp turn on when you test your flow. Does it work when you use it in a new flow? I really need all the inform…
-
@Count_B He mentioned double relay, so assumed he needed 2 outputs, the Fgs 213 only has 1 output. Plus the price (mine were even cheaper, 10 whole cents) and size are exactly the same, so why not @Eternity Indeed both inputs can be configured …
-
The fibaro dimmer 2 is no double dimmer, has 2 inputs but only 1 output. But you can set it to just on/off But if I may add on to your options, if you are buying a new one (and need 2 outputs) you can better go for the double Switch 2 (Fgs 223) whi…
-
@vaderag it is just not possible unless you let the manufacturer update the firmware of the sensor. or if you are really daring (and really knowing in electrics), open it up and forcefully lower the signal on the circuitboard itself. or go to a fi…
-
@vaderag it is all based on settings of the device itself, why create it yourself if it is already there.
-
@Count_B yes there is, the "value changed" card triggers on all changes, including counting down, it has a tag with the value that you then can use in the AND column
-
@klankbart Hope you do know that that is a totally different company and has nothing to do with athom's homey? Just a coincidence that they use the same name Actually not even an company, just a developer that made a good looking dashboard (that i…
-
@Count_B why not use the countdown app? 1: [if] motion [and] alarm is on [then] countdown to 10 (and just don't use messages... You know you have an alarm right? You don't want to let the burglar know) 2: [if] deactivate alarm [and] countdown runn…
-
@jorislangewouters The frequentie difference is too big, so it will be a different chip. This btw isn't just for homey, this will be for all your zwave devices
-
There is no way to stop a flow if it already is at the "then/else" column. You could try to work around it if it is something you can deactivate with another flow.
-
@vaderag you can't use tokens in the name part, you need to type the name there. Is an open issue that will be probably be fixed in the new homey app, not possible to be fixed how it is implemented now.
-
Did you perhaps change any of the settings? Tkb's working is pretty hacky because they are actually only meant for direct association, and not to activate flows(triggers) in a controller. And this really reliant on a few variables in the device Ple…
-
@maartenv The apir is in the supported devices list? Did you look at the right app? All kaku devices that are (officially) supported are in list
-
The screenshot shows me that it was included correctly as the correct device (title = Switch TZ36/TZ56) If you are looking at the Device Class, then that is something specific created by the z-wave alliance to give the TYPE of the device a name (yo…
-
can you please upload a screenshot of the node information here? never seen this behavior before, maybe also try re-installing (really delete and then re-install) the app from your homey
-
I'm running heos system, but don't have Spotify (deezer ftw) or use homey music directly, I only use the mute/unmute, pause/play and volume functionality, music itself I take care of in the official heos app. It works pretty well, mute functions ar…
-
@jaylward those id's are already in the app for the tz36/tz56 combination, are you sure you installed the tkb home app?
-
@jaylward i still need the product id, and for good measure the manufacter id (as there is something odd with this one with one of the types now going around)
-
@vk900 did you by any chance changed any of the settings? and disabled the "turn off sabotage alarm" setting or changed the time for the cancellation. if not, then try to change the corresponding setting to another value, save, and put it back to t…
-
There is no real good place that has all the id's from TKB devices, so i am reliant on the users if an id is not supported (trust me, there is a lot, and there is no consistency in their id usage) So if you please can say the manufacturer id, devic…
-
There is a big difference in being in sabotage alarm already (probably in your case) and constantly sending the signal, which it probably won't as it should only send it once when being triggered, or when gotten from the sensor of course, but it is…