This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
caseda
About
- Username
- caseda
- Joined
- Visits
- 5,158
- Last Active
- Roles
- Member
Comments
-
@Seraphim You use the tags themselves in the trigger for "a variable has changed", this does not work you need to use the name of the (logic) variable. If the value is not a logic value, then you need the corresponding device's trigger card for "l…
-
@keverjeroen you probably never re-included it after tamper was added several months ago
-
I think he means a keyFob not a rfid tag solution. there are several: Fibaro Keyfob Aeotec Panic Button Aeotec Keyfob Aeotec Minimote (unsupported at the moment) Popp Keyfob (unsupported at the moment) and probably a few more
-
ikea heeft led lampen van 6,99 maar dit zijn geen lampen met zigbee, maar gewone dimbare lampen
-
Je kan ook naar aeotec kijken, de laatste nieuwste 2 nano modules werken als het goed is ook zonder blauwe draad, let daarbij wel op dat je een lamp MOET aansluiten (dit geld ook voor de fibaro dimmer 2) Verder zijn er geen merken die 2 draads onde…
-
It was not a bug, there are just a lot of devices that can't send an endpoint along the node id (multichannel association). So that probably also is the case for the multisensor 6
-
@bsmit did you try to reset the smoke sensor yet?
-
Http app has by default security on, so the bearer token needs to be send in the header (not possible in url) You can disable it in the app's settings (on your own risk), or use one of the ways to add bearer token as header along with the GET
-
there is no difference in 29.1,1 and 1,29.1 you just switched the id's (node 29 endpoint 1, and node 1)
-
It is no bug that some devices don't have it, there are just a lot of devices that can't send multi channel association, so if the note is not there, the device does not support sending endpoints along the association
-
All apps run in its own sandbox, so even if an app had bad intentions it won't come very far without the user giving the app more information (like the bearer token). But all apps in the store are checked by athom for things like this. Apps instal…
-
@vaderag They can not, they only have a relais inside for on/off, with dimming it would have been 2 to maybe even 3 times as big
-
There is only one motion sensor for the outdoors, and that is of the brand philio, though that doesn't have lux measurements, so you would need another device for that. myself just have a fibaro motion sensor pointing outside to measure the lux, wo…
-
I use 2 rgbw strips myself without any issue, also 2 (1 version 2x) other versions where both of them use also the white channel (color temperature strips, and only white) Did you change any device settings perhaps? Try re-pairing it so it is fully…
-
1. You don't have to turn it on before hand, that might even cause the weird behaviour you are having 2. You first set the red channel to max(?) and after that the red again to probably off(?) i don't think that is going to work, i would change the …
-
@honey there is a flow card to set individual outputs, including the white one You can also choose to set a color temperature, I created the driver so this is possible, even with rgb and rgbw strips connected
-
@zimbra didn't it just crash and only a restart was needed? Crash also makes devices not respond. Or was it really fully gone from the apps page. As Uninstal doesn't happen out of the blue unless it was "--run" from cli on restart. Also the devic…
-
Try waking it up on its new spot (triple pressing the b button) If that isn't working, try re-pairing it on its original spot and bring homey to there instead of the sensor to homey. Zwave devices work best from the start when included on its spot…
-
@honey flow card
-
@jeroenvollenbrock said a pretty long time ago that it would be deleted automatically in a future update...
-
The second relay does not have a separate node placement in the mesh only the main node, the same is for the greenwave sockets, only the main device is shown. Unknown devices are really unknown devices (no app available), or failed during inclusion…
-
@razorfish79 did you looked at and/or changed the settings accordingly? Like mentioned (edited) in my previous post
-
Not sure what you are trying to achieve here. If you want to control the outputs separately, then you need to use the flow card, there is no need for parameter changes. Also look what settings are available for the controller, incl what is attache…
-
Sorry for the late response, kinda forgot this one. What is your distance from homey? and do you see any signals come in when you look at the z-wave log (Settings -> Z-Wave -> Stuff for geeks) when you trigger the inputs
-
Correct, the newer version (fgdw-002) only has a build in temp sensor, but is missing the connections because of this. The older fgk-00x (x = 1 - 9) (z-wave plus and non-plus versions) does have this, be careful that there can't be any power on thi…
-
Correct, the pairing isn't the hardest, it is the reset. Phillips hue works best on the Light Link part of zigbee which is a different part then homey uses (Home Automation). Difference is like the different channels wifi has, so a slight differen…
-
you can leave away the "yet" fibaro will not (as in never) give out the firmware data to outside companies, so the only option is to buy a fibaro controller, or make use of some shop's update service (robbshop in the netherlands for example)
-
If I read it all then it is just a remote that falls asleep during inclusion and you need to triple press the button, wait 5 seconds, triple press again, wait 5 seconds, and repeat that until it is included (so not hold the button!) This is someth…
-
I see what has gone wrong, and I'll see if I can make some time to fix it quickly today
-
@dennis91 with the old official hue app (v1) it is possible