This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
caseda
About
- Username
- caseda
- Joined
- Visits
- 5,158
- Last Active
- Roles
- Member
Comments
-
As also mentioned on the app page, I will receive mine this evening and then start writing full support for it
-
@danone Yup, you can mark it as solved (or we can do it for you), looks like all issues are even solved
-
@maartenverbunt Does the blue led light up when you triple press one of the buttons of the sensor? (one of both switches does need to be pressed while triple pressing the other, so either the one inside, or the one on the back). If you reset z-wav…
-
it is actually better to use the "sensor value changed" devices trigger card, and then select battery level, as not all battery devices have the battery alarm capability. @phil_s even if it was not "-" for the fibaro's it will not be reliable, as…
-
@maartenverbunt did you reset your device yet? either by homey's settings -> Z-wave -> [Remove Device] or the manual way mentioned in the manual. otherwise maybe be a bit more specific on what level it is not added, does it stop right at the…
-
Web based logs will be displayed in chrome's Console, not in the cli
-
I don't have any experience with this dimmer, but i can answer your question. It is not possible to send just a dim command without turning the light on, that is a limitation of zwave, It is only, turn on add a certain brightness, or turn on at the…
-
The dimmer 2 just can't work in that way, a switch can't fix that unfortunately. I only know (even though don't really like to recommend them because of their limited workings) of 1 brand that can work in this way, which is Tkb Home, but that will …
-
Even though it has 2 inputs, the 2 inputs work a bit different then 1 = on, and 2 = off, they are meant for 2 separate (momentary or toggle) switches. as you have a 2 way momentary switch (on - Nothing - on) (most likely) and is not supported by th…
-
The dimmer 2 does not support having a manual dimmer connected to it, it can only be a normal switch (momentary, or toggle switch). not sure what made you think that, as it is mentioned nowhere you can attach an actual dimmer to the fibaro dimmer 2…
-
Athom (@weejewel) already had contact with fibaro, and had the same response as I did "we are not going to give the update files to other companies" I even offered to sign a NDA, but that did not matter
-
every update of the heatmiser app? last change was 5 months ago, and seeing that there are no issues reported on github, not even sure if athom knows that it is not working properly. And frankly haven't seen any bug reports on the forum myself eith…
-
@Practitioner when selecting the rgb option (etc) during inclusion you can choose which of the 4 zones of that option you want to include, if you want all 4 you need to make sure all 4 of the checkmarks are there Then they work with each group as a…
-
Soon(-ish) I will start on a rewrite to SDKv2 that might increase stability. The rest is not app related, so I can't change anything in that, and needs to be addressed by athom. It might be related to a bug that is going around at the moment with …
-
Philio does not reset its own tamper alarm after some time, unless implemented separately by the driver creator. manufacturers choice (the only manufacturer that does this), and homey not having a button to reset the state.
-
@Seraphim this is workings only, looks later beta, gui is still bound to change a lot
-
Could you look in the zwave log (settings - > zwave - > stuff for geeks) what it says during inclusion? There can be 3 issues: homey can have a bit of difficulty when online for a long time with inclusion (resulting in send timeouts), fixabl…
-
Hmm, then you are a first where settings get disabled because of a failed (?) inclusion. Shouldn't be happening thanks to the way it is implemented. Oh well, for everything a first I guess, happy that it works for you know, let me know if it happen…
-
Hmm, can't reproduce this yet, very strange
-
@Eternity there is a big difference in "Scene cards" (which is only for the receiving end of homey, the single, double, tripple clicking and the hold) and being able to change both relays inside. not sure why robbshop should mention it that way, bu…
-
I had direct contact with fibaro about this subject before, it is way more deep then "their policy that it is their code" it has got to do with adaptation/edits/copy of the device firmware itself which they don't want to happen. example: i guess we…
-
Welke relais module? de fgs-222 staat gewoon op de fibaro website: http://manuals.fibaro.com/#3 ook de oudere modellen staan nog gewoon op de site als je het zoekt. Maar fair enough, genoeg uit gelegd ja, weinig makkelijke opties, ligt er maar aan…
-
Buiten verlichting dubbel polig afgeschakeld? Ze maken niet eens standaard (spatwater dichte) schakelaars die dubbelpolig afschakelen (voor consumenten). er staat in de NEN1010 (uit 2010) (reglement voor elektra, voor de non elektro mensen) niks in…
-
Om misschien een beter advies te geven kan je beter je use-case schetsen hier, aangezien er ontzettend veel modules zijn Maar de rgbw controller zijn eigenlijk analoge inputs geen digitale, ook met een schakelaar verbind je met de 0 (nul). je kan …
-
a bulb can always reset, even if it has never been paired before. If it is doing nothing you are either not switching fast enough, or try one more extra switch
-
Zijn het wel slimme (zigbee) lampen en niet de gewoon dimbare lampen die ikea ook heeft?
-
So you mean the "Sensor Value has changed" card that is also in the devices cards? with battery level in the dropdown
-
It is easier to switch it around. 1. If motion is detected, turn on light and Stop the timer. 2. If motion stops, start the timer 3. If timer is zero then turn off lights
-
Batterijen niet leeg? Of zo goed als
-
@Veldkornet devices can only be updated if they are connected to a primary controller, so if hc2 is included in homey (which doesn't work anyway) is still is not possible as homey is then the primary controller.