This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
canedje
About
- Username
- canedje
- Joined
- Visits
- 920
- Last Active
- Roles
- Member
Comments
-
I installed 3 of them now. One I broke, trying to build in the switch. (To tight) So I installed it at the "centraaldoos" . There is normally more space to build in. (tip ) Good luck!
-
This is the "startup" screen. After a couple of seconds it must go to normal layout. As it shows now it looks like Zigbee network not running
-
Unfortunately after 23 hours, Zigbee (Ikea bulbs) not reacting again anymore. Running under 1.5.6.rc8 ( same error as under rc7) Giving an address error in the mobile app I need to do a PtP again and up we go. z-wave looks stable so far (NEO Coolca…
-
Het 6 keer aanzetten is om de lamp te resetten. De lamp knipperd dan 1x. Niet om te koppelen Om te koppelen zou alleen een keer uit en aan zetten voldoende moeten zijn. (dat vraagt homey ook by het koppelen) Zelf heb ik de lampen gepaired op ongevee…
-
I just installed rc8, saying Zigbee items fixed. I hope so!
-
sossienl said: Same here. Homey hangs every day. Z-Wave behaviour that is off. First time in a while that I regret to follow the experimental releases. Obviously we have a lot of holidays the last weeks, but I really hope on an intermediate f…
-
cbh said: If "time is 3:00 am" And "flow has not run in 47 hours" with the Candy-app would do it... Thanks
-
I did it with the motion alarm of a NEO PIR. It helped me
-
you need to do a PtP for at least 10 minutes before powering again!
-
I had the same today. I did PtP after that it worked again
-
Did you try to put the device to learn mode again by pusshing 3 times the button? Or remove the battery for a while? I did have a simulair problem with a NEO PIR and it did help
-
B3rt said: dat op storing vallen heb ik ook... Heel vaak een rood driehoekje etc en niet reageren, ligt denk ik aan de drivers van Homey van zigbee/ikea, ik hoop dat ze dit oplossen in een update. Dat flikkeren herken ik niet trouwens. Ik heb …
-
I may conclude this is not possible?
-
Ikea lampen zijn niet makkelijk te pairen. Ik heb er nu 4 (980lux E27 dim en kleur). Eentje kreeg ik met geen mogelijkheid gepaird. Teruggebracht en geruild. De geruilde versie pairde wel. Pairen gaat nooit in 1 keer. Op een gegeven moment zegt Home…
-
After the update two off my NEO power plugs didn't react any more or after a very long delay (couple off seconds). If i look into the tool website They are using about four devices to reach Homey. I did swop both of them with another plugs in the Me…
-
Good rematk. It looks like wrong place indeed
-
Wow. My NEO PIRs also not showing temp in Homey. Lux yes. If it is there, it would be nice that it will be shown.
-
barbados said: What i did was install the papertrail app and let every flow add a line in the log. that way you can see what flow started when. Then double running flows will be easy to spot. I did already with simple log. It shows indee…
-
I hope the most on a stable Homey, especially the Z-wave and Zigbee part. Beside that I hope a good presence and/or Geofencing system
-
Esmiranda said: Helaas deursensor en magneet meerdere keren tegen en van elkaar gedaan maar zonder effect. Jammer
-
Bij mijn NEO PIR moet ik eerst weer een "beweging"maken om de PIR actief te krijgen en de beweginsalarm uit. Misschien moet je hier de contacten een keer opnieuw verbreken en maken?
-
swttt said: Ik heb op amazon een paar vellen NFC stickers gekocht... Volgens mij 10 euro ofzo voor 2 velletjes (geen idee hoeveel er op zaten/zitten) maar werkt ook prima Die heb ik ook besteld maar nog niet binnen
-
swttt said: Een van de dingen waar ik nog mee bezig wil/ga is NFC. Mijn idee is om CD covers op een soort karton te printen (of laten printen) met daarin/onder een NFC sticker. Door dan het karton tegen Homey aan te houden speelt hij via spotif…
-
I changed short time ago to 1.5.6.rc7 because my Fibaro double wall switches didn't work properly and stopt working after about one hour. That is now fixed and no problems anymore after the update. But now 1 Neo power plug (out of six) is not actin…
-
Traveler said: Ok because I read that you use a NEO PIR after sunset? Or do you mean in conjunction with the sunset feature? After sunset - certain time - u switch off the lights and het the motion sensor handle it? Yes, after sunset and…
-
I do not use an external sensor? Or do you mean the PIR? I also use the default sunset option
-
Traveler said: If I look at pictures for Fibaro "switches" I end up seeing a black box that you put in the wall, am I correct to assume that you mount a switch to that? Or am I wrong? I do have exacly the same situation and I used the Fiba…
-
Vreemde keuze in mijn beleving om de desktop app te laten verdwijnen. Volgens het mij is het ideaal om beiden naast elkaar te laten bestaan. Ik zie mij zelf echt niet freubelen op een mobieltje. Of wordt er bedoeld dat je via een broswer Homey benad…
-
Yesterday I decided to go over to the experimental install of 1.5.6.rc7. I was to frustrated about a big part of my domotica not working. Now after a day every thing is still working, so that feels good.
-
Andreas said: I had the some problems with Fibaro and 1.5.3 since I updated to 1.5.6 rc7 everything works fine. The official release should come soon. Thanks, that gives hope for the future Edit: Again after one hour my two double Fiba…