This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
anne
About
- Username
- anne
- Joined
- Visits
- 2,275
- Last Active
- Roles
- Member
Comments
-
The more details you provide, the more likely it is that someone will provide a response. Some details on the udp commands appear here: https://github.com/zouppen/valo/blob/master/README-udp.txt I am not aware of an existing app that can send cus…
-
You set the carrier frequency in the signal definition in app.json. See https://apps.developer.athom.com/tutorial-Signals.html and https://apps.developer.athom.com/tutorial-Signals-Radio Configuration.html. Something like this: "signals": {…
-
Yes, the news is that it is still not possible to receive 868 MHz FSK modulated signals It is not clear when this functionality will be released. Possibly it will be made available as part of the developer tools (at some point).
-
firmware version: 1.3.1 28 apps installed Free Space: 1.02 GB Uptime: 3896377 (45 days, or 6 weeks and 3 days) Loadavg: [0.4482421875,0.560546875,0.423828125] Memory: 24.54 MB free of 511.54 MB , swap: 309.44 MB
-
Jawel, je komt dan op de zoekpagina van het forum. En als je naar beneden scrollt kom je de volgende link tegen: https://forum.athom.com/discussion/11/controlling-a-central-ventilation-system-with-homey/p3
-
Oops, my bad
-
I guess you missed this: https://forum.athom.com/discussion/2382/slide-make-your-existing-curtains-smart-kickstarter#latest There's an app in the making even before any Slide units have been shipped.
-
If you don't have any mobile devices (really?) you can install bluestacks for instance and run the (Android) app on your PC. I have used it as an easy way to capture trafic from apps.
-
I had exactly the same or at least very similar issues with my NodOn wallswitch. It worked fine for months, then started to respond poorly (2.7 m from Homey, line of sight). After removing it, re-pairing didn't work, even centimeters from Homey ther…
-
Yes, that's the one you need. There are several examples in the forum. A good place to start is the forum discussion for the HTTP request app: https://forum.athom.com/discussion/770/http-request-flow-cards-1-5-0. You will probably also need the 'Bet…
-
It looks like a good product, not too long ago I had a multi-point lock ('meerpuntssluiting') fitted though Some thoughts on an app, I think the changes of ID Lock making a Homey app are slim to none, at the very least someone would have to send…
-
I love Homey Insights, it's one of my favourite features It's great to be able to make changes in flows and logic based on the Insight measurements. Aggregating data in reports could be useful for dashboards, but perhaps also in flows ('if average…
-
The procedure is described in the Readme, including the HEX string: https://apps.athom.com/app/com.xiaomi-miio. * HEX: 21310020ffffffffffffffffffffffffffffffffffffffffffffffffffffffff
-
Yes and yes. You need to include the light in your wifi network using the TP-Link Kasa app. You can then use Homey as well as the Kasa app to control the light. A mains powered zwave dimmer/switch has the advantage that it will add a node in the z…
-
Or a TP-Link LB-series bulb (wifi). The LB100 (dimmable) is ~25 euro, LB110 (dimmable, 800 lumen) is ~29 euro. I have included a feature in the app (TP-Link Smart Devices) that allows a slow turn on/off, the bulb will then gradually increase/decre…
-
Hi, Yes, slide will work without internet connectivity There's a short update on indiegogo: https://www.indiegogo.com/projects/slide-make-your-existing-curtains-smart-gadget#/updates A more eleborate update with details on the app that's being d…
-
That's the spirit And yes, that's the one! A bit ridiculous to think that the simple sensor is 4 times as expensive as the entire NodeMCU. I didn't want to wait for another shipment from China, and liked the finished product. I only put some he…
-
Oops, my post was truncated, I guess I was rambling a bit ... Once you have the hardware, follow the instructions to connect the CC1101 to the NodeMCU. I found the trickiest bit to solder the antenna to the CC1101, the chips I received only had…
-
I could put together a unit for you, however I wouldn't want to provide support on the hobbyist stuff I produce And I have plenty of other stuff to do, sorry. However, it is a fun project to do yourself, and I can definitely help out in case you h…
-
As a sidenote, with the Win10 update 1703 you can now also sideload Homey apps from the Windows 10 Linux development subsystem (which is Ubuntu running natively under windows) which can be convenient/useful. sudo apt-get install nodejs sudo apt-ge…
-
A propos smart (wifi) bulbs, I have added support for the TP-Link LB series smart bulbs in the TP-Link app. The LB130 color version is nice, it has good colors, inc. color temp. setting from 2500 to 9000 K (the none-color LB110/120 have this too),…
-
I published it as an alpha version, however bumping it to beta didn't work due to an issue with the app store (fixed by Athom in the meantime). I ended up submitting a version with just an increased version number (0.0.7), it should be approved shor…
-
I have a couple of other apps/projects I am focusing on first.
-
Version 0.0.8 of the app has been submitted and will hopefully shortly be published in the app store. The update addresses several bugs in the driver for the smart bulbs. The app now correctly tracks the state of the bulb. I have also played a bit…
-
It seems you can probably use the HTTP request app to control the plug, just use the http POST commands below: Utilisation avec wget Eteindre : wget -O - -q --post-data="command=GpioForCrond%200&SystemCommandSubmit=Apply" http://admin:admin@1…