This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
aloft
About
- Username
- aloft
- Joined
- Visits
- 48
- Last Active
- Roles
- Member
Comments
-
After a full month of no z-wave triggering functionality, I was more than ready to get the update. They seem to have it stable internally, so hopefully it will be released sooner than next Friday on the experimental channel, so Homey's fun:frustrati…
-
@MarcoF I think there are different use cases for the built-in delay in a card and the CountDown app. The upside of the built-in delay card is that you don't need an extra flow to execute; this is a downside of the CountDown app, where you need a s…
-
@ThijsDeJong et al, I have added a new Random card in CountDown. It is pending approval at Athom, but if you want you can already get it from github: https://github.com/ralfvd/nl.bevlogenheid.countdown.git
-
Would this be a feature which could be useful in the CountDown app? So instead of a fixed value , have a random value between 'a' and 'b' to start the countdown?
-
I use -in a similar flow- the extra condition that if the lamp is not ON, only then act on the Lux changes. That way, the Lux doesn't influence flow behaviour when the light is on.
-
@PimViergever thanks for the reply; I am totally at a loss why this could be happening. Maybe a bug that was triggered in a previous version (there were issues with 'remembering' the counters in previous Homey FW's), and didn't solve by upgrading.…
-
I did the upgrade to 0.8.39 but my CountDown timers are still available and working.
-
cautje said: Kaku is ok, No zwave alarm trigger in.39 I do see the triggers in devices-card ( for both Fibaro Motion Sensor and Aetec recessed door sensor) ', but it seems the flows are not triggered based on those triggers.
-
PimViergever said: Homey: 0.8.3.9 countdown: 0.1.0 after a reboot the counters are disappearing. This was also on earlier firmware versions of Homey. Any tips or is it a bug? @PimViergever can you explain what you mean by disappearing?…
-
@AndyWilde which version of the Athom firmware and which version of CountDown are you running ? Can you give me some steps to reproduce? I seem to be unable to do so.
-
0.4.3 is in the app store, this should be a pretty stable release. More info in the 'official' app forum: https://forum.athom.com/discussion/1615/published-honeywell-evohome-0-4-3#latest
-
Version 0.4.3 has been published to the app store New features: - Extra trigger and actions cards - Trigger: When QuickAction mode changes (excluding changes initiated via Homey) - Trigger: When any temperature changes - Action: Set ma…
-
And 0.4.3 is on GitHub and pending approval in the app store; this solves the first-run bug.
-
I've published 0.4.2 to GitHub https://github.com/ralfvd/nl.bevlogenheid.evohome ; this solves the 'no insights' bug and it improves the removing and adding of devices. I've not put it to the app store yet, as it will have one bug for 'new install…
-
Good news (hopefully I wont jinx it ;-) ) . I think I found the issue. Or better, several issues ;-) . One issue that Homey 0.8.37+ now requires a more strict input when sending a trigger. As I upgraded while troubleshooting, this hampered the fact…
-
The work-around for this is to do a positive delay of 23.5 hours after sunset with the built-in timers. Assuming Homey doesn't reboot in the mean time, this will trigger approx 30 minutes before sunset the next day. In most countries sunset variat…
-
mglat said: Good suggestions. Thx. wondering if it will reset the stopwatch after a new motion (and killing the old one). I will test it. If you use the CountDown app and you set the timer on motion, it will re-set the counter with move…
-
Too bad... The logging still isn't working in the new 0.4.2 version of the app. One way or the other, the second update of a device will not trigger the insights logging (or even the 'measure temperature changed' part. Only the first change durin…
-
@Panda ; yesterday I had a crash of Pushover, it seemed to be related that my message was empty ( as a variable I was sending was empty ) Maybe you can add a check that on actual sending, when the text is 'empty', it won't send. App works stable…
-
Reflow said: gruijter_dev said: @Reflow: I had the same thing at first. I solved it this morning by breefly disabling and enabling the app again in Homey Settings. Lucky u, been Trying to disable en enable it multiple times sinc…
-
@Reflow I think I found the issue for Insights where it will not log to insights on temperature changes. I hope to finalise the quickaction triggers in the next days, then i'll push a new version to the app store.
-
Reflow said: Installed it from the app store, everything seems to work fine except for the insight logging which doesn't seems to show up on the left side. I can read the temperature on de device page. When initiating a device, the first…
-
Version 0.4.1 has just been published on the app store. I am now working on triggers based on changing of the 'QuickAction' status; this will trigger (with a max 5 minutes delay, as we cannot query the Evohome server too much) when the status cha…
-
Emile said: An issue has already been found. Making Homey say something from the Flow Editor is broken (can not read property 'session' of null) Only from within the flow editor (when testing?) or also when executing based on the trigge…
-
@gruijter_dev It's running 2.17 ; but I am still not sure if any telegram messages are arriving; I get some weird output on the status page of the web interface: Applicatie Logger:runningLaatste Telegram:CESTLaatste verwerking:Mon Jan 25 22:06:16…
-
@gruijter_dev It is a new install (with a second-hand Smile P1). And i think i found the culprit; If I login to the smile p1 itself, it doesn't show any meters. It does show receiving telegrams, but somehow it is not parsing them correctly. The pl…
-
BasPost said: Can't wait when it is released in the app store. I could install it from Github, but after restart Homey, the Github installed apps are gone... Running Homey software version 0.8.36 Yes, that is a known issue with all loc…
-
@gruijter_dev I got the following crash error when trying to connect my Plugwise Smile P1: Stack trace: TypeError: Cannot read property '0' of undefined at /drivers/smilep1/driver.js:40:46 at Parser. (/node_modules/xml2js/lib/xml2js.js:484:18) at…
-
I've uploaded version 0.4.1 (and submitted to the App store! ). Features added: - Cancel temperature via action card ; when a individual temperature is set, use cancel temperature to cancel and go back to the schedule (or quick action that is prog…
-
Alle said: Ok.. is this related to the error i get when change the temp. and click the zone again? error: target_temperature:invalid_type Edit: Looks like that the Homey reboots after the error. After the reboot the Evohome App i…