This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
TedTolboom
About
- Username
- TedTolboom
- Joined
- -
- Visits
- 7,633
- Last Active
- Roles
- Member
Comments
-
RuudvB said: 0burner0 said: RuudvB said: I have about 8 Coolcam plugs, no defective issues so far. Strange could be a coincident. But only got 3 and now 3 are defect. Very unfortunate, maybe a bad batch? I got mo…
-
1560
-
@cbh since you have been re-pairing some Z-wave devices lately (inside info), is it possible that these are nodeID’s from devices you have re-paired lately??
-
@Mecallie, there are some alternatives: - Xiaomi smart wall plug (will require a EU adapter piece); support will be added in the next week - INNR is about to release a ZigBee power plug, support will be added to the INNR app once the plug is availab…
-
The ID Lock app has been published in the App Store... if upgrading from a previous version, a re-pair (exclusion and inclusion based on the new app) is strongly advised to make use of the new capabilities... https://apps.athom.com/app/no.idlock @…
-
@PT2017 wil je deze lampen altijd tegelijker aan en uitschakelen? Dan zou je de lampen ook hetzelfde signaal kunnen leren... maar dan heb je niet de gelegenheid meer om ze individueel aan of uit te schakelen..
-
v0.0.1 (initial release) is available on https://github.com/TedTolboom/de.steinel/tree/development
-
@Julian would be great if you could test the Steinel app. Can you contact me on Slack to discuss results / details?
-
Anybody already having a Steinel Z-wave sensor / light that is able to test the app?
-
Gents, I'm about to release the long awaited SDK2 re-write, including full support for the v2.x firmware version of the ZHC5010. With this version, it is possible to include the ZHC5010 securely to Homey, to enable controlling of other secure devic…
-
The first version of the ID Lock app has been added for approval to the app store: v 1.0.0 * App store release for ID lock 101 (including Z-Wave module board 01A) Thanks to all who contributed in testing this app! To keep the history, I requ…
-
@kasteleman so yes, the camera has a gateway by itself... so motion and door sensors need to be directly connected to this camera / gateway: https://xiaomi-mi.com/ip-cameras/xiaomi-aqara-smart-camera-gateway-edition-white/ I'm not sure if (an senso…
-
vaderag said: Do you think it is possible to support ZigBee triggered camera (https://m.gearbest.com/ip-cameras/pp_978606.html?utm_source=tt_de) Seems this would be great addition to trigger record by motion sensor/send notification etc …
-
@DaneeDeKruyff said: The only thing to think about is that the luminance is only reported when motion is detected, so not on a regular or delta base as is possible with the Aeotecs We’re still looking into getting this to work. But indeed safest as…
-
RuudvB said: @TedTolboom I'm willing to lend you my motor if that would be of help... @RuudvB thanks for the offer; send you a PM
-
RuudvB said: @TedTolboom Just to let you know that today I received the ZigBee curtain motor. Did you already have a chance for implementing this device into the app? Still waiting for a stable 1.5.x release of homey to test a lot of new stu…
-
DIYglenn said: It seems like any value over 66% will turn the light off and on... I don't understand why? Shouldn't it be 100%? @DIYglenn I guess you are using a Fibaro dimmer-2... please check the manual; it has a dedicated section t…
-
radoslav said: Hi Ted, thank you for amazing work you are doing. Do you have any news regarding timeline for MH7 Electrical Heating thermostat support? Hi Radoslav, Thanks for your feedback!. Realistic estimation? I hope to be able wor…
-
OpenMind_NL said: phil_s said: great, so not a second Reinier situation I don't know about a Reinier situation, but this will be an OpenMind_NL or Alex situation anyways. I do think you were first, already... an…
-
viix said: Can this app add association among the switch gang's switch? Say button 4 activate button 1 on another switch via the command class or I have to go through a homey flow? Still new to this so pardon my ignorance~ @viix yes this…
-
Tallguy said: Weirdest thing is that I just added a door sensor (Xiaomi stuff ofcourse) and that one is 'online'...but the other ones are still offline. Seems like it's not 'refreshing' or something like that???? This is one of the bugs …
-
Peke said: Any updates for the water sensors? Nope.... waiting for delivery...
-
Mecallie said: I am trying to install this app, but it says my version is incompatible. Current version: 2.3.1 . Is this because I am not on the experimental channel for updates with my Homey? Or is it because I have "Xiaomi Mi Home" installed …
-
Gents, I have an update available to be tested. Please contact me on slack if you are willing to test this update.
-
@agentq15 which of the two motion sensors are you talking about? So I can try to reproduce. It could be that for this sensor the lower threshold should be at least 60 seconds (and not 30 seconds)...
-
@DaneeDeKruyff said: Received some Aqara Weather sensors and Aqara Human Body Sensors last weekend, great stuff. Also very happy with the app, great job @TedTolboom though I have some remarks/questions. In the supported devices description it…
-
Icarus said: Have you been able to start progress on the smoke detector yet? About 20 comments back there was a mention about adding a driver for them but I can't seem to find an update on github. Any thing I can do regarding the driver or are …
-
B3rt said: @TedTolboom can you comment on my question please? I wish to order these remotec devices but only when they work with homey. Hi @B3rt, @limkopi78 is currently working to create a driver for the ZXT-120.
-
dvk8 said: Thanks again for your reply. I made a simple flow with a voice card like you suggested and presses the button right next to homey, but again nothing happends. Not sure if it has to do with my buttons, homey or the xiaomi app. Maybe…
-
captkiwi said: Some interresting Update: I have reset my homey to factory settings and ONLY installed the zigbee MI app v1.03. The 4 Aqara weather sensors i before had connected to homey 1 is now not willing to pair anymore. I also recieve…