This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
TedTolboom
About
- Username
- TedTolboom
- Joined
- -
- Visits
- 7,633
- Last Active
- Roles
- Member
Comments
-
@SanderVh I guess the Fibaro Dimmer-2 manual should provide the answer: Controlling the Dimmer 2 using a switch: Momentary switch (after releasing the switch a spring automatically pushes back and disconnects the switch): • Turning the light O…
-
@SanderVh good to hear... and yes, looking at our neighbours also contributes... But like @Rocodamelshe mentioned, I would recommend to use momentary switches (pulddrukkers) with the dimmer-2's.. you can even add a double version to 1 dimmer-2,…
-
@larsmachiels I've updated the app as submitted for approval in the App Store: Updated Changelog: v 0.1.3 * Add second deviceID for Aqara Window/Door Sensor * Fix device ID's (and update driver name) for Aqara Wireless Remote Switch Single @cap…
-
You’re right... it is serious money, but compared to building a new house? And what happens if KaKu disappoints? Business controller angry... At best you can sell the KaKu units on Marktplaats for half the value and you want / have to upgrade to…
-
Regarding Question 3; is this an existing fireplace? And is it controlled by Ir of by RF (most commonly used) if it is a new fireplace, I would check the option to have it controlled via an app WIFI...
-
Hi @SanderV I think most of us started with KaKi to transfer at a later moment in time to a Z-wave or recently Zigbee based system... it might look more expensive, but it is also providing some significant advantages: 2 way communication and a me…
-
@larsmachiels nothing changed in 0.1.3 for this sensor... but looking to the deviceID, indeed the clarifies the failure to include... @captkiwi would this also explain your issues? Can you share the ID’s of your failed devices I will add the addit…
-
captkiwi said: @TedTolboom I have pulled the plug of Homey for 10 minutes, restart Homey, and wait for all apps to have loaded. No luck pairing them. I have 3x Xiaomi Occupancy sensors and 3x Xiaomi Door/Windows sensors that refuse to pair…
-
It looks to me that IHOMECAM, is offering rebranded or even re-selling (without rebranding) Neo and Heimann Z-wave products... Neo already has an extensive app supporting all available Z-wave devices... First feedback of Heimann’s Z-wave (and Zig…
-
Jeroenvano said: Is the New FIBARO Radiatorvalve going to be supported? If Yes any ETA (this year)? I saw @mruiter already got it working... on SDK2 basis...
-
Hakurac said: @TedTolboom It works for me now! In the flow only single click works, not 2-4 clicks. @Bloen Are you sure you used the Deveolper Branch from GitHub? Thanks for the confirmation! I've updated the app accordingly and submitt…
-
Bloen said: Here the information of the single switch. hope it helps you to resolve the issue Yes, thanks... product ID as used in the app is incorrect... but easy to solve... Do you, or anyone else with this device, have an opportunit…
-
Bloen said: When adding my Aqara Wireless Remote Switch Single I only get Unknown Zigbee device, tried to use both the devices in the app. Any tips? The other devices work well Can you share a screenshot of the device information (ID's) …
-
@captkiwi and @Bloen Both issues might be related to a bug in Homey SW 1.5.x Can you try to pull the plug of Homey for 10 minutes, restart Homey, wait for all apps to have loaded (settings > apps > no spinnng circles behind the app names) and…
-
Yannick said: is there a way to add different assets (for App Store) to the productid's or do you need to duplicate/separate the products in app.json for that? Basic rule of thumb: if the device has different capabilities or different se…
-
Yannick said: not sure if productTypeId can be an array too but will try tonight. All ID's can be arrays, see below example out of one of my apps: "manufacturerId": [351], "productTypeId": [12546, 12561, 16642, 16657, 16658, 20753], "p…
-
Yannick said: I"m not at home currently so can't sideload an app. But do you guys think this will work in app.json:"manufacturerId": 297, "productTypeId": [4,6], "productId": [2048, 0], Should work. But I'm also interrested why th…
-
@Yannick almost the same steps, except for “Open Node.js command prompt” you need to open the terminal..
-
haakeik said: TedTolboom said: goran said: Hi, Thanks for a great app, just a question though. I've just added my Heatit thermofloor and everything works great, but Homey shows in the setting for the thermostat that "secure =…
-
Yannick said: limkopi78 said: I've added support for a few more models of Yale locks. May I request for a pull? I wanted to do the same but I cannot find the correct product ID. When I include the Yale lock as a generic z-wave d…
-
djesko said: Did read on app page that you will add it ! And perhaps sooner than expected v0.1.2 has been published to the app store. New supported device line-up: Changelog: v 0.1.2 * Add support for Aqara Wireless Remote Swit…
-
@daand @Eternity there is a Z-wave bug, already present since before 1.5.3 (so included into the Stable release), that can cause a group of Z-wave devices to stop responding. Try to PTP (Pull the Powercord) for 10-15 minutes. In most cases the devi…
-
I'm working to finalize another app (Logic Home Control) update first. I expect to have some time in two weeks from now to add the additional features (notifications and status) for the IDLock...
-
Ja, wel iets... de inclusion van de Gira lukt inmiddels... Alleen zal ik tijd moeten gaan steken om er achter te komen hoe (en of) de Gira in combinatie met een controller kan werken. Op dit moment zie ik nog geen data reports naar de controller toe…
-
Caros said: @TedTolboom Can I make a (small) request for an improvement of the app? Today my Wife was Cooking for serveral hours in the kitchen. According to the documentation the maximum value of the Co2 Sensor on the screen is 2000PPM. Today…
-
RuudvB said: @TedTolboom Today I have ordered a bundle of Zigbee MI devices. Under which a curtain rail and motor for testing. Since you seem quite busy to me, if you ever find the time to implement the curtain motors I'll be happy to do some …
-
The Remotec app has been updated to SDK2 in preparation to extend for the ZXT-120 and ZXT-600 v2.0.1 update: Update ZRC-90 to full SDK2 Update meshdriver to 1.2.4
-
Minor change: @caros release v1.0.4 Add additional productID for MH9-CO2 Update meshdriver to 1.2.4
-
DIYglenn said: TedTolboom said: @DIYglenn The forced brightness will only be activated when the device is switched on. So no need to look at the current state of the dimmer... aka skip the AND column cards... I'm not sure tha…
-
Fire69 said: DIYglenn said: Also, what is the "relative brightness level" as opposed to brightness level? I'd like to know that too! With relative brightness you can increase the brightness in (relative) steps of e.g.…