This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
TedTolboom
About
- Username
- TedTolboom
- Joined
- -
- Visits
- 7,633
- Last Active
- Roles
- Member
Comments
-
@DIYglenn The forced brightness will only be activated when the device is switched on. So no need to look at the current state of the dimmer... aka skip the AND column cards...
-
Mecallie said: When I try to install the App, I get a message stating that it is not supported on my Homey version. Do I need to be on the beta version for this? For this app to work, it indeed depends on a updated Homey SW release: >…
-
@captkiwi thanks for reporting back...I did some testing myself... when the switch is used within ~5 meters distance of Homey, no latency or duplicate reporting is visible. When used at a larger distance, I start to see duplicate reports and a del…
-
captkiwi said: Iam having troubles with the Xiaomi Wireless Switch.. NOT the Aqara version After the app got updated to v0.1.1 the connection has been lost with the flow. I have tried the following; * Rebooting homey and looking if th…
-
vaderag said: Do you know if you'll be able to support the Xiaomi Aqara Zigbee switches - looking for something like this as an additional control for my Yeelights! Thanks @vaderag already supported, but in a seperate Xiaomi-mi Zigbee app,…
-
Caros said: @TedTolboom, I have a question regarding the MH9 CO2 sensor. In the Netherlands most sellers sell this sensor together with the optional VOC sensor. On tweakers I found this message regarding this sensor: "2. For VOC(optional), ac…
-
Version 0.1.1 has been submitted to the app store: Changelog: v 0.1.1 * Wireless Switch (round) - Add 'Key Held' and 'Key released' triggers * Aqara Weather sensor - Add correct learn picture * All devices - Update inclusion instructions @Mar…
-
MarkVanWinden said: Good job so far, Was hoping that: https://www.banggood.com/New-Arrival-Original-Xiaomi-Mini-Smart-Home-Temperature-and-Humidity-Sensor-White-p-1046061.html?rmmds=myorder&cur_warehouse=CN would work since its the same in…
-
Priknr1 said: TedTolboom said: durd said: Just picked up some Mijia Xiomi temp/humi-sensors and thought I'd pair them with the app. The device icon is for the Aqara device, but the pairing-image is for the Mijia device (round …
-
durd said: Just picked up some Mijia Xiomi temp/humi-sensors and thought I'd pair them with the app. The device icon is for the Aqara device, but the pairing-image is for the Mijia device (round button), but it pairs as an unknown device. Are t…
-
Guys please mind the differences regarding the motion sensors (using names from xiaomi-mi.com): Xiaomi Smart Home Aqara Human Body Sensor: * alarm_motion + luminance * supported in current app Xiaomi Mi Smart Home Occupancy Sensor (older vers…
-
Idus said: Is there any plans on adding their larger buttons as well? Got two on a whim and they are really nice and at a really nice price i.e. Would be awesome to have the Xiaomi family working with Homey. @Idus We are looking into ad…
-
The Xiaomi-mi Zigbee app is available in the app store: https://apps.athom.com/app/com.xiaomi-mi As mentioned in the readme, as well as in the inclusion information window; the older Xiaomi sensors need to be kept awake during inclusion. Keep press…
-
This initial app store version of the Xiaomi-mi Zigbee app has been submitted for approval with the following device line-up: Changelog: v 0.1.0 * App store release with support for - both Door/Window sensors, - both wireless switches, …
-
Mod break: merged original request topic, consisting a lot of valueable information, into the new Xiaomi Zigbee app topic
-
steffennygaard said: Each of the 4 buttons should be able to: Short press turns on / off the light Long press the dim light up / down @steffennygaard can you be a bit more specific to give you the right answers? Which devices should …
-
@gebel there are thermostats available specifically for electrical heating systems; like Heatit or MCOHome has... they work with electrical floor heating, but I would guess they also work with electrical powered infrared heaters...
-
MbenzNo said: phil_s said: Just a question: where can i order a id lock? www.idlock.no. Current version is not in stock anymore, and the new ID Lock 150 is not available until early next year. There may be some retailers that h…
-
@steinis you’re right, but then you allways need to continue insecure (as long as you have one insecure device). It is a fundamental choice from Athom, but considering the new policy of the Z-wave alliance (enforcing security as of mid of this yea…
-
@steinis this is not controller (read Homey) related, but device (ZWC-K8) related (limitation). Homey is able to create the required associations. From what I read in the manual it appears that the ZWC-K8 does not support S0 security and without it…
-
MbenzNo said: Additional testing this version: 3) have not tested this yet. Do I have to uninstall latest app and exclude/include the lock again to do this test? Thanks, will have a look into the log when I’m home. on 3) no, you can si…
-
I might setup a BETA channel on Slack for the IDLock testing and debugging; anybody interested and willing to join debugging this driver and app? @MbenzNo and @Jani?
-
MbenzNo said: Installed https://github.com/TedTolboom/no.IDLock/tree/reportListener_Scene Had some difficulties installing, but got the same problem after reverting to last version. Installed OK after I removed and installed the batteries in t…
-
Gents, just had an idea to see if I can get the notifications status updates (e.g. locked by RF) working (ie. showing in the debug logging) Is someone able to install and test this branch: https://github.com/TedTolboom/no.IDLock/tree/reportListener…
-
@jolerius good to hear the pairing worked out fine! As explained above, I don't have the IDLock myself and build this app / driver based on the available information (manual) to provide basic operation (lock / unlock. Could you check when running…
-
jolerius said: TedTolboom said: Gents, what is your opinion: is the basic operation of the IDLock based on the current app (https://github.com/TedTolboom/no.IDLock/tree/master) good (stable) enough to release to the app store? …
-
Gents, what is your opinion: is the basic operation of the IDLock based on the current app (https://github.com/TedTolboom/no.IDLock/tree/master) good (stable) enough to release to the app store?
-
@timkouters if you contact me on Slack (see https://slack.athom.com/ for the invite), it is easier to support you
-
Hi Tim, As mentioned, I see a number of errors in the registerCapability definitions for dim and onoff (ie. report parser switched between onoff and dim)... since the reportListener is linked to the same Command Class and report; I don't see a reas…
-
@Exile82 check also the Hank scene controller (one-button version); as small as the Xiaomi... PS. we are working to get the Xiaomi buttons directly connected to Homey ;-P