This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
TedTolboom
About
- Username
- TedTolboom
- Joined
- -
- Visits
- 7,633
- Last Active
- Roles
- Member
Comments
-
@timkouters If it is the Domitech app, is the status on the mobile card updating correctly? If I check your code, I think you over-speciyfing the registerCapability... below code for "onoff" should work: this.registerCapability('onoff', 'SWITCH_MUL…
-
@timkouters which triggers do you mean; the flowCardTrigger (flow card in the IF column); “a device has been switched on”? these are default available for the onoff and dim capability; as long as you select a device class that has these capabilitie…
-
aende said: Thanks, good to hear its in the works. There was no information in the forum and i was expecting announcement from athom on the forum last week and not the silense there is now. @aende I forwarded your suggestion towards th…
-
@aende Athom is following up fast; currently Homey SW 1.5.4-RC1 is being released for testing in Developer Preview channel. The assigned Common Vulnerabilities and Exposures (CVE) identifiers for the Krack Attacks / WIFI WPA2 vulnerability are exp…
-
Brief update: In the Developer Preview channel, we are currently testing Homey SW 1.5.4-RC1, which includes the required change in Homey's core (Zigbee Shepherd) to get the Xiaomi (Aqara) devices working... Based on 1.5.4-RC1, I've got the basic fu…
-
danone said: Hi guys, digging out this post again. Just purchased few more z-wave devices which type I never owned before, and they include as basic z-wave devices. @TedTolboom sorry for the trouble, kindly I ask you to add this Australian freq…
-
Kissa78 said: Hi. I downloaded again the last version you linked here. The lock is now working. In the App it shows locked/unlocked. But here is no labeling in the APP so hard to know what is unlocked or locked unless you know it. And there is …
-
vaderag said: morning all, does anyone know if it is it possible to change the sensitivity with a flow? I have my motion sensor being used for lights and alarm but it's too sensitive when on normal sensitivity for alarm (as the cat manages to …
-
Kissa78 said: Hi. I have added my lock to my Homey now. That works great. But it wont lock or unlock. Nothing happens when i press the switch in Homey. Any suggestions? @Kissa78 did you install the app and if so when did you download th…
-
Rwin said: My ZHC5002 is installed, beautiful peace of electronics waiting to get used. Can i use it with as an basic device? It's included by Homey perfectly but editing parameters or even the basic groups.... no response. Can't figure out how…
-
0burner0 said: I signedup for the IOS beta, but did I not get selected ore has there been no communication so far? @0burner0 all the applications have to be processed manually; added to TestFlight etc... so I guess it will take some time
-
Aaron said: Hi @TedTolboom I did, they told me they were not ordering them because there were not enough people wanting them....strange. If you don't sell them nobody can buy them, not everybody is going to leaver their email address. I only d…
-
Aaron said: Nobody bought one yet? @Aaron I had one available for testing from Robbshop; I would inquire there.
-
@MbenzNo thanks for the feedback. Compared to the 'old' Zwavedriver where the polling interval was set in seconds unit, it was reverted back to millisecond unit in the new meshdriver... I've updated the app and driver for IDLock 101 based on the …
-
goran said: Hi, Thanks for a great app, just a question though. I've just added my Heatit thermofloor and everything works great, but Homey shows in the setting for the thermostat that "secure = no". All my other z-wave plus devices shows "yes…
-
@mecallie I merged your question into this topic. See my comment a little bit up regarding the current issue with integrating Xiaomi Zigbee devices: https://forum.athom.com/discussion/comment/59819/#Comment_59819 In the meantime, we might have fo…
-
MbenzNo said: Jepp, I was using the latest version. Uninstalled and installed latest version again with same result. Uninstalled and installed previous version, and it is working now! I can unlock/lock the lock, and it reports correct status wh…
-
MbenzNo said: Brilliant! I have included my lock without any problem, but it does not give status of locked/Unlocked, and it does not respond to lock/unlock command from Homey. Battery level are not reported. It does however react to settings…
-
Out of the Software update (link to be able to signup for iOS testing): Homey Smartphone App Good news! The new smartphone app is available for bèta testing. Android users can get it in the Google Play Storeand iPhone users can signup here for early…
-
@cgHome did you check the MiLight and Toon apps: https://github.com/search?utf8=✓&q=org:athombv+"homey-wifidriver"&type=Code
-
Gents, I've updated the app and driver based on the new ZwaveLockDevice meshdriver (based on the Danaloc driver): https://github.com/TedTolboom/no.IDLock Can someone test this and send me the debug logging; please remove and re-include the lock aft…
-
JasperB said: Hmm but does one lamp remain wired to the switch? @TedTolboom as the creator of the MCO home app, do you know if it would work to leave one output empty at the touch panel switch (2), and trigger a flow by pushing the button which…
-
@johnniemalm your effort is appreciated.... is it possible to contact me on Slack (athomcommunity.slack.com, invite via athom.com)?
-
johnniemalm said: TedTolboom said: johnniemalm said: What about this ? https://github.com/TedTolboom/no.IDLock Yeah, what is it? Oh yes :-) I see now that it is you :-) does it work ok ? it is no problem to…
-
johnniemalm said: What about this ? https://github.com/TedTolboom/no.IDLock Yeah, what is it?
-
cbh said: Firmware 2.0.2 available: http://logichome.dk/index.php/10-support-categories/6-zhc5010-firmware (A manufacturer, who really reacts quickly on reported errors - cool!) For the people requesting the ability to update the firmwa…
-
I guess this means that more effort will be put into making Homey and Toon working together: https://www.athom.com/en/press/#6f530d39-dfc8-478e-b8a5-3c3e60d4af43
-
@macelwolf what type of logging do you see when you run the app in debug mode when adding the following code to the onMeshInit statement: onMeshInit() { // enable debugging this.enableDebug(); // print the node's info to the console this.printNode();
-
Arjen said: Thanks! It took several attempts before homey and heat-it were on speaking terms, due to include-timeouts and some zwave errors, but now it works. Thanks for putting in the effort, much appreciated! Happy feet! Thanks for the…
-
Delgul said: Ok here goes. Not an exact translation but a merge with new info: I have found out the following info from the node information of the device: Manufacturers ID: 277 Product Type ID: 272 Product ID: 1 The manufacturer ID seems to co…