This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
TedTolboom
About
- Username
- TedTolboom
- Joined
- -
- Visits
- 7,633
- Last Active
- Roles
- Member
Comments
-
Lurendrejer said: Hi. Does Homey reset z-wave device parameters to default when you clear the input field, or does it just leave the parameters on the device as they were? The RAW parameters you mean? I don’t think RAW parameters will …
-
Changelog to v 1.0.4v1.0.4 Fixed minor error in switch Binary report parser in case a number is reported as Switch value Fixed minor error where 'Scene notification offset' values higher than 128 are not transmitted correctly Next up: SDK2 re-wr…
-
Changelog to v1.0.3: v1.0.3 Add containment for issue with report handling MH10-PM2 for measure_PM2.5 capability Update meshdriver to 1.2.3
-
@Delgul on content: can you try to add the device to Homey to see the node information (manufacturer ID, product ID and product Type ID) of the device? In Homey these numbers are shown in decimal, info on e.g. the product database of the Z-wave all…
-
Mariuss said: Working like a charm! All values now working without a flaw. Marius Good to hear... Next (and working) @Mariuss release will be pushed to the app store..
-
cbh said: New firmware v 2.1 now avaliable: http://logichome.dk/index.php/10-support-categories/6-zhc5010-firmware (need another z-wave controller as update via Homey is not avaliable yet, though) v2.0.1 indeed. No need for a full Z-wav…
-
@Mariuss Thanx for the log! Issue found: The command received by Homey (in HEX) is not parsed (correctly); the 'Sensor Type (RAW)' is not parsed into readable form whereas the report parsed (which I added for PM2.5 to the meshdriver) is checking t…
-
Mariuss said: Hi, I have no experience with debug mode, but with instructions I can do it right away. Marius Great! You'll need to download the MCOHome app from my repository: https://github.com/TedTolboom/com.mcohome And follow the …
-
@Mariuss I see the right reports being send to the controller: COMMAND_CLASS_SENSOR_MULTILEVEL, 0x0523 = SENSOR_MULTILEVEL_REPORT for Particulate Matter 2.5 (v7) and an occasional COMMAND_CLASS_SENSOR_MULTILEVEL, 0x0505 = SENSOR_MULTILEVEL_REPORT f…
-
Mariuss said: Hi, it connects now but only get readings for temp / humidity. No data on PM2.5 Hi @Mariuss, when did you install it? Did the value on the display change by more than 1.0 ug/m3? This is the device default (unchangeable) t…
-
JPe said: TedTolboom said: Just received an initial response that I will get a response after the summer holidays (beginning of August)... Hi Ted, are summer holidays already over? Did you receive any response yet? Mine ar…
-
Brief update: We are making small steps in integrating the Xiaomi Zigbee devices into Homey. As mentioned earlier, inclusion is possible, but reporting is not (processed right). Homey uses an implementation of the Zigbee Shepherd gateway to commun…
-
Taxandria said: Hee guys, I'm trying to upload the Xiaomi Sensor app (https://forum.athom.com/discussion/450/use-integrate-of-xiaomi-mi-smart-home-kit-sensors-zigbee-protocol/p3) to my homey. When following this instructions i get the following…
-
Zijn het wel Z-wave motion sensors of de HomeKit (Bluetooth variant); maw wat is het type nummer?
-
@albertdijksma I guess you are referring to this app: https://github.com/athombv/com.athom.arduino If you look into the node_modules subfolder, https://github.com/athombv/com.athom.arduino/tree/master/node_modules you'll see the link to the requir…
-
@Lurendrejer I don't like having to use variables to get a flow card to work where a simple 0 should do... Please check the updated changelog of v1.0.3
-
Mariuss said: Sounds good really appreciate the effort @Mariuss a public holiday is delaying the response from MCOHome to next week (announced up front).. Just released an dedicated @Mariuss release (v1.0.3) to the app store Let me …
-
jani said: Any news on this topic? No, didn't get a response yet. I will check once more.
-
@steinis secure is the new standard (enforced by the Z-wave alliance since this year)... Why would you like to add a device unsecure? Is something not working?
-
@skoni het broetje van de ZHC5010 wordt al ondersteunt. Er komt een nieuwe firmware update aan voor de ZHC5002 (en ook de ZHC5010) die een aantal problemen oplost (secure inclusion en multichannel association)... Zodra de Logic Home Control app i…
-
Yet another update before the SDK2 re-write (couldn't resist): v 1.0.3 Fixed issue preventing status from being updated (manual action required! see note above) Fixed issue with indicator flow card not able to turn of indicator LED In order to h…
-
JorgeCastro said: Hi roydamgrave..could you please let me know if the Jung 433 transmitter 48kfh will be working with the app you are developing ??..I used that RF remote control to operate some Jung dimmers and blind controllers 1254UDE ,CD52…
-
vaderag said: bvdbos said: You can set the level in Fibaro. If change is bigger then .... Lumen then the sensor reports the change to Homey... I have it set at 200: If the light turns off, the sensor reports that to Homey? F…
-
@konradwalsh not really... quite busy at work (currently abroad). Hope to be able to work on it in the next two weeks...
-
rvmourik said: Does this also count for the Busch jeager zll wall switches? No. The Gira and Jung devices are almost identical Zigbee LightLink Scene controllers: see Zigbee Product Certification page The Busch-Jaeger Zigbee devices i…
-
roydamgrave said: Hi all, I have a JUNG ZigBee radio transmitter (ZLL CD 5004 M,, see https://www.jung.de/en/online-catalogue/283370045) and would like to use it with Homey. Is it possible to link this device, and program actions for each indi…
-
Mariuss said: Just tried to add my PM2.5 sensor and it reports that no Homey app is available and adds it as a general device. I see from my earlier post that I forgot to add the product id which is 513 @Mariuss I'll add this productID …
-
Hi @fabiannmb I notified @kasteleman (developer of this app) on your issue. Knowing him and based on the info provided (product ID’s) it can be solved quickly...
-
@quakerix I think @m-ruiter found on Ali some matching glass frames including electrical sockets; not sure if he posted some pictures in the Neo topic, or only on Slack...
-
Just some sneak peak and early feedback on the ZHC5010 Firmwave v2.0 (currently in BETA testing)... This firmware adds the capability to include the ZHC5010 securely to Homey and some additional configuration parameters to be able to determine if a…