This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
TedTolboom
About
- Username
- TedTolboom
- Joined
- -
- Visits
- 7,633
- Last Active
- Roles
- Member
Comments
-
Lurendrejer said: Thank you. Will the SDK rewrite fix the missing status updates for the virtual devices? Yes, looked at it for this update; but would require some additional changes; will be done with (full) SDK2 rewrite
-
Updated the app to 1.0.2 (pending app store approval), to fixing crash reports v 1.0.2 Fix issue preventing driver to crash when using the "Set LED level" and "Set LED flash" flow cards Next update will be a re-write of the app to SDK2, embedding a…
-
Additional question: are the devices add added as basic devices or is the inclusion process terminated with a error code?
-
Hi @lesterchan Thanks for the feedback and good to hear that your issue has been solved! A good thing to learn out of this is that Z-wave congestion can also be caused by devices that were never part of Homey’s network... and that it is essential …
-
@micha35w deze gaan werken met Homey, maar zijn alleen met Gira front te krijgen... Maar vandaag eens navraag gedaan bij Athom over mijn connection issue met de Gira LightLink.. Waarschijnlijk (80%) is dit probleem in de volgende SW release (1.5.4)…
-
MCOHome app v1.0.1 has been released to the app store today: Change log: v1.0.1 * Update to Z-wave meshdriver capabilities * Update correct image Switch-4 * Add additional productID's for Touch Panel Switches (1-4x)
-
@micha35w waarom ben ik eigenlijk omgeschakeld naar het engels? Nee, het schiet nog niet op. De wandzender wordt momenteel nog niet correct herkend door Homey... https://github.com/athombv/node-homey-meshdriver/issues/8 Als alternatief heb ik in d…
-
lesterchan said: Thanks for that, it works fine for my MH-S314. Will try other models tonight. My TouchPanel is mounted inside the wall and it becomes a Faraday cage. The range is pretty short =( I also want to change an icon and realized it…
-
The app is available in the app store! Looking forward to your feedback.
-
Slofware said: Hoe kan ik een flow elke 100msec laten uitvoeren? Ik zie wel 1 seconden maar daar kan ik geen dimmer meemaken, duurt een beetje lang dan @slofware waarom zou je een script iedere 100msec willen laten draaien?
-
lesterchan said: Will MCO Touch Panel 4 Gang (MH-S314) be supported? EDIT: Just saw the second comment above this. Hi @lesterchan, yes the MH-S314 is supported. As also indicated in the opening post, the product ID's MCOHome uses (in …
-
Slofware said: Oke heb nu een lampje bij de Ikea gehaald, werkt snel en makkelijk. Je kan de helderheid en wit-kleur aanpassen via de app of in een flow. Maar, ik wil de helderheid aanpassen aan de hand van een variabelen en zoals ik het nu zi…
-
@arthur I still believe we're living in an ideal world where IKEA is rapidly releasing new products (and updating it's available products with new firmware) and although I know Athom is in contact with IKEA, it is not all pre-announced... and I'm s…
-
arthur said: The assortment of IKEA Tradfri seems to be growing fast by creating lots of variants. You have to be very careful when selecting the right bulb with desired capabilities and App support. Maybe it would be best to add the IKEA part …
-
The app has been submitted to the app store... expecting it to become available on Monday or Tuesday
-
@Lurendrejer the forum has options to add a comment with more than 6 words @Leeuw1960 it enables that within Homey you can configure that a motion sensor is directly switching on a lamp upon movement without having to setup flows within Homey to…
-
Merged the original topic into a new app specific topic in Apps section.
-
Thanks guys; this helps! It does however not correspond to the product ID's I got from the manufacturer, clarifying right now. I'll finalize the MCOhome app this weekend and will release it to the app store with support for: * Touch panel switches…
-
phil_s said: would be great for the steinel outdoor motion sensor with zwave... better than a fibaro motion sensor i think! @phil_s I've generated the app based on the product certification data of the Z-wave alliance... It includes su…
-
Not sure if anyone else has one of these Steinel lights.... Below app should provide basic support for the Steinel lights (untested): https://github.com/TedTolboom/de.steinel
-
Hi @cbh, I did not try them myself... but also looked at them and send the manufacturer also an mail; but did not get a response... It should be possible to create an app for it based on the information listed on the product certification page..
-
@cbh Let me comment on this a bit more. Had a similar discussion with @Lurendrejer earlier on Slack... Homey side: Inclusion, Homey will try to include the device at the highest security level. If the device supports it, it will be added securely.…
-
Eternity said: Thanks @TedTolboom ! I was almost (...) doubting myself ;-) I was already doubting you too... for posting Aeotec questions in the Fibaro topic
-
Eternity said: Trying to use the single group to set the association, I get a red line and can't update the setting. I can set the 29 (ID of the Fibaro, but without setting the S1 or S2). Is this a Aeotec issue (bug)? @Eternity there i…
-
Eternity said: Hm, that sounds interesting to avoid delays in my flows.... direct association. So setting up the motion sensor, with 255 (ON) at 'Motion detection ON command' and 0 (OFF) at 'Motion detection OFF command' should do the trick. …
-
phil_s said: @TedTolboom thx you for answer. i will play with this when i am at home. but can for example say, if motion detected then toggle with direct associatian s1 and s2? Yes, and you could also play with the settings linked to t…
-
phil_s said: TedTolboom said: @phil_s 1st opportunity to respond... had a night off on Friday with some fathers from school.. and recovered yesterday next to the soccer field ;-P No, don't think it is complicated.... the toggle comma…
-
@Lurendrejer good to hear!
-
Bebopper said: What does the factory reset of z-wave network option in Homey actually do? (is it the 'reset for the mesh network I am referring to above?) .... I would like to setup a flow to send a notification to my phone when the battery of …
-
@dr.jake send an email to support@athom.com mention the issue, request of Jeroen and the cloudID of your Homey (shown in settings stuff for geeks)... in addition add jeroen+support@athom.com as additional user to your Homey