This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
TedTolboom
About
- Username
- TedTolboom
- Joined
- -
- Visits
- 7,633
- Last Active
- Roles
- Member
Comments
-
Jerpet said: Hi guys, At this moment I've got 3 z-wave devices connected to my homey. 1 Fibaro motion sensor is working pretty solid. The other two, a NEO door sensor and motion sensor, not so much. The distance to homey is about 3 meters for …
-
Miricals also happen during Easter... Enjoy! v1.1.21 has been released to the app store: https://apps.athom.com/app/com.neo Change Log: v 1.1.21 fixed: NAS-AB01ZE - Add action card for setting alarm or doorbell tune NAS-AB01ZE - Fixed alarm state …
-
jimmy_zeropm said: @TedTolboom I have 3 plugs and one Fibaro motion sensor, which is working very good. I also see in the log that device 6 is creating traffic. That is (I think) because I've altered the update interval to 60. And is it correct…
-
bvb said: Where can I change the device class? Do i need to exclude the device and include it again or is thre a switch in the App somewhere? Currently the only option is to exclude the device and include it again.. A long requested feat…
-
d_janssen said: Hi there, Is it correct that Homey is not able to display the software firmware version of a z-wave device? Of is it somewhere (hidden) Correct. Currently it is not possible to display the firmware version information of…
-
@jimmy_zeropm do you only have the 4 power plugs or more devices connected to the Z-wave network of Homey? Can you check the Z-wave log (Settings > Z-wave > Stuf for geeks) and see if there is a node ID that is creating a large amount of traff…
-
bvb said: Hi again, I have now the Qubino Dimmer ...DD1 and the device Shows no power consumption. Is this a bug? I see in the settings some functions for power selection. Thanks for your help. You've included the device as light. Cu…
-
jimmy_zeropm said: @TedTolboom I'm still not able to add the third socket. I can reset the device, but it still flashes yellow after the triple button is pressed instead of blue/red. Only after a reset to factory settings the plug flashes the b…
-
RuudvB said: Since the new app version 1.1.19 or 1.1.20 my NEO siren does not react anymore to flows. When directly activated via devices it makes a lot of noise as it should, but in flows is stays silent... I tried to remove the device from Z…
-
Jouse said: Would be really nice to get Trådfri support. I have Homey with some KnK switches and zwave in use, and now I installed 10 trådfri bulbs. They work really well with their native app, and based on the articles mentioned, adding suppor…
-
Eternity said: My 3 Fibaro relays (FGS-222) have stopped working again.... So, for no apparent reason they stop working, and after a while function again... This must be Homey f/w related. @Eternity which Homey software version are you …
-
@Kay-Arne did you reboot Homey after the update? And how much time did you wait before testing it after update / reboot? I had a similar experience (no devices responding), rebooted Homey and waited for the Z-wave network to start-up completely (c…
-
@jimmy_zeropm let's see... First the meaning of the LED lights: So the LED blinking yellow would mean that it is being added to the Z-wave network. What you could try is to do the following: 1. remove the devices (power plugs) from Homey, 2. r…
-
Eternity said: @TedTolboom I tried that, and it didn't work. But, guess what.... all three my FGS-222's are working again ! ! I don't know what caused the problem....nor what solved it... Were you able to control any Z-wave device (on…
-
Eternity said: Hm, re-pairing is even difficult. Can't get Homey to remove the (no longer working) FGS-222. @Eternity go to devices > click on the X of the FGS-222 > Homey will show the instructions to remove... if the device is …
-
Updated app (v1.1.2), including the ability to setup individual polling on all sockets and capabilities as well as the addition of the powernode 5 (UK) , is available in the app store.
-
rafi said: Hi, Quick queston re z-wave range and operation. I have a z-wave switch in garden that operates lights there. By looking at Z-wave devices in Homey that relay ther has only one connection to the Z-wave controller - in this case Home…
-
Not device / app related, but most likely 1.2.0 RC10 related. Reboot changes the name also in insights... Did you already check if an Github issue has been created?
-
Eternity said: Today I received a 'Neo Light Switch' (Neo Touch Switch). The switch came without a manual; how do I include it to Homey? Thanks! @Eternity in the current app-store release of the Neo app, the Neo touch switch will not …
-
lourens said: TedTolboom said: lourens said: Thanks for your great work!. I can confirm Neo Touch Switch is not working. In homey it shows as 3 devices. 1 is Neo Touch switch, other two are both named right switch. How c…
-
lourens said: Thanks for your great work!. I can confirm Neo Touch Switch is not working. In homey it shows as 3 devices. 1 is Neo Touch switch, other two are both named right switch. How can I help? Switch is not responding. (double post…
-
@Aurelia did this answer your question / solve your issue?
-
flexy said: @TedTolboom......Beta version of Sonos.....I so did NOT install that before *hits head. Now I have it installed and Sonos speaker shows on "muziek" page. That was very helpful, Thank you Ted! Don't hit it too hard... your wel…
-
@flexy did you install the Beta version of the Sonos app?
-
@Dennis check with @lubbertkramer Next week the 2nd developer meetup will take place... topic will be speech. See (in Dutch): https://athomcommunity.slack.com/archives/C04E9KJAD/p1489760099971073 Could be a suggestion to add as topic for a next m…
-
@Aurelia all parameters, including support hints, of the Fibaro motion sensors are embedded in de settings page of the motion sensor. No need to manually adjust parameter 80 Go to zones and devices tab > find you motion sensor > open device s…
-
@eternity the powernode has a build in over current protection... but this will show as a flashing red ! in the power button and can be reset by pressing the power button. Is there absolutely no response / led not lighting up? That would be a bummer…
-
Gents, the updated Greenwave app is currently waiting for app store approval. Unfortunately, I learned that approval is not expected within the next 1-2 weeks. So to the people willing to take advantage of this update: check the following Github r…
-
jimmy_zeropm said: Since a few days I see that my luminance insights are quite different. They seem to be go from high to low but that isn't the case. Like this picture. Anybody who can confirm this? Plus or non-plus motion sensor? On…
-
quakerix said: Better Logic crashed a few times in 1.10. Anyone else has this issue? It says the developer has been notified. But i do not see any issue on the github. The developer will receive a crash report... but Github issues …