This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
TedTolboom
About
- Username
- TedTolboom
- Joined
- -
- Visits
- 7,633
- Last Active
- Roles
- Member
Comments
-
JPe said: @chico Inderdaad kan er maar 1 trigger in een flow zijn, maar ergens heb ik gelezen dat er wellicht in de toekomst meerdere triggers gecombineerd kunnen worden, momenteel zul je voor elke trigger een flow moeten maken Klopt…
-
@chico deze deurbel is WiFi gebaseerd. De Neo app ondersteunt alleen Z-wave Neo coolcam devices. Er zijn momenteel geen plannen om de app uit te breiden of een losse app te maken voor de WiFi deurbel of andere WiFi Neo devices.
-
and available in the app store: https://apps.athom.com/app/no.thermofloor
-
@aloft perhaps an idea to update the Z-wave driver in the Everspring app; current version is 1.1.4. As of 1.1.6 instead of editing the drivers (setting 'debug:true' ) there is also an option to simply add a folder or file called 'debug' in the driv…
-
The Thermo-Floor app has been submitted to the app store and is pending approval. Changelog: v1.0.0 App store ready update Added 2 additional action cards ('change themostat mode' and 'change setpoint of specific thermostat mode') A brief demo o…
-
@mbenzo Yes is a known issue, awaiting a fix from a external party Athom is using the graphics from. How to temporarily fix it (to be able to read the graph) is to use the arrows to show the graph in full screen, zoom out and if this does not solve…
-
@CodeKing great app! I'm currently testing it with my new app for the Thermofloor app providing support for the Multireg / Heatit / Magnum electrical thermostats... So far so good! The thermofloor app has specific setpoints per thermostat mode, wh…
-
Lol... as many options as members... Following the KISS principle I would setup 2 flows: Flow 1: motion alarm triggered THEN greetings + disable flow 1 Flow 2: time = 6:00 THEN enable Flow 1 No need for any (better) logic values / additional apps.…
-
@RuudvB I've checked their own website http://www.heimantech.com/... Seems like they have the same devices for different protocols: Z-wave, Zigbee and Wifi. Not much information is available to compare these devices with e.g. Neo's Motion sensors.…
-
@RuudvB let me take a closer look into these devices...
-
@MbenzNo Looking at the Manufacturing ID, Product type and -ID, it looks like the FOXX devices are rebranded Aeotec devices; in particular the Aeotec DSB29 Door Sensor (2nd Generation). Currently, this equivalent device is not added (yet) to the Aeo…
-
@Eternity this is currently not possible without re-pairing. It is on the roadmap to add it as a re-pair wizard; see feedback in: https://github.com/athombv/homey/issues/899 I've asked in this issue for an update on timing.
-
@RJS did you try to restart the SONOS app and or restarting Homey (== restart of SONOS app)? Sonos running fine (start / stop) on my Homey at Firmware Version: 1.3.0-rc.9
-
@PimBliek which Horstmann thermostat are you referring to? In the meantime, @Priknr1 released his Horstmann / Secure app to the App Store... I'm sure he is able to contribute to helping you to switch off your Vera
-
Thanx @0burner0, also ordered one... would be nice to have a spin remote app for Homey indeed!
-
@dvktea ik heb je topic verplaatst naar de Nederlandse sectie aangezien je vraag in het Nederlands gesteld is. Kun je aangeven welke Homey software versie je gebruiken en op welk platform (iOS of Android) de app geïnstalleerd is? Wanneer je uitlog…
-
bvdbos said: Maybe a mix of secure and non-secure devices? I thought I read somewhere there's no direct association possible between these two connections. @bvdbos this depends on the receiving device; a Fibaro Dimmer-2 does not accept …
-
@etienne can you indicate what happens in more detail? I assume LED's are connected to this dimmer-2.. Is it a dip in dim level and recovering back to the old level? Or is the dim level changed from e.g. 80% to 20%? In addition, since I suspect a …
-
@Pizzaking bedankt voor het terugkoppelen en vermelden van de oplossing!
-
Rebtor said: My Aeon Labs DSC06106-ZWEU wasn't supported by the current driver so i fixed that. Here is the code. @Rebtor much appreciated work! If possible, can you add the modified driver through a Pull Request to Athom's Aeotec app …
-
Kay-Arne said: @TedTolboom, thnx! I thought all zwave plus devices would support encryption, too bad! Just look at the protocol conformance statement: "Supports Z-Wave Network Security? Yes" and "Supports Z-Wave AES-128 Security S0? No…
-
Kay-Arne said: Devices of both vendors are capable of secured inclusion, right? Did I somehow mess up the inclusion or is this a constraint in the Neo Coolcam app? Both devices are Z-wave plus, but the Neo (together with some others) do…
-
Brief update: Alpha testing is progressing well, especially with the support of @npeters, @dbonsaksen and the thermostat that has been provided (temporarely) by Robbshop. Most functionality is working; thermostat modes (off / comfort / eco / coolin…
-
I'm planning to extend the Remotec app with support for the ZXT-120 as well as the to be announced ZXT-600 (PLUS version). Which might be an alternative. I do need to finalize work on some other devices before I will be able to start on these.
-
arno1965 said: Wow and brilliant! Working as described! Thanks @TedTolboom and @Eternity ! Just thinking further: You can combine it even with the duration idea mentioned some posts above... Flow 2: Scene is activated ('Button 1' + 'released…
-
Eternity said: I am not sure I understand you correctly... You are saying that if I press 1x I should do this within 1/5 of a second (0,2 sec), otherwise the 'pressed' action is seen? And if I keep a button pressed, the App will register thi…