This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
TedTolboom
About
- Username
- TedTolboom
- Joined
- -
- Visits
- 7,633
- Last Active
- Roles
- Member
Comments
-
@bvdbos yup... I am not sure if the Trello roadmap is still maintained (will check). Implementation of multi-channel association was discussed on Slack after the last software update; Athom indicated that it is still on the work list ("we are on it…
-
Goed bezig @lubbertkramer! Ik ben er bij!
-
@cautje No, not in the way it is implemented for Fibaro. In the Fibaro wall plug, this option is embedded into the device firmware, for the Neo not. It could be an option to implement it in the Homey software, to 'overrule' actions initiated from …
-
quakerix said: I don't agree. I received 4 touch devices and are planning to use them. @quakerix so far I only received 2 reports where the touch switch (CC V1) does not work with the App Store version (CC V2 compatible) of the Neo app. …
-
@Undertaker one of the developers of Athom will need to take a look into this issue. Could you create an Github issue at https://github.com/athombv/homey/issues for this, with above mentioned information? much appreciated!
-
@erictks just checked above info; the main info still missing is: - command_class versions, in particular COMMAND_CLASS_SWITCH_BINARY; is the device using version 1 or 2? - how are the 3 switches linked to the multichannel endpoints? - which associa…
-
@mariuss well if I can support to complete yet another transfer ;-P You only have the MH10 PM2.5 sensor or more MCO home devices?
-
@lubbertkramer happen to have the same UPS for my NAS; but does not qualify for walking around with Homey....
-
@Mariuss this happens to be on my list; expect to receive next week a MCO home thermostat (MH7), CO2 sensor and double switch... So yes, I'll make an MCO home app and expect to be able to make a PM2.5 sensor driver based on experience with the C…
-
Modbreak: moved to questions & help
-
Modbreak: moved to questions & help
-
Modbreak: moved to questions & help
-
On the NAS-PD02, aka the 'new' motion sensor, I can confirm that this the sensor is working 100% based on the current driver and does NOT have a temperature sensor included (nor additional settings). @Wimstradamus indeed most likely a translation e…
-
@chico de Homey community is nog steeds behoorlijk aan het groeien... wat begonnen is bij de Kickstarter backers (ben ik ook een van), is zich nu aan het uitbreiden met mensen die geïnteresseerd zijn in techniek en hun huis willen automatiseren. Da…
-
Great to hear @shideban!
-
Does it still work (switch on and off) / updates it's data (power usage)?
-
boes20 said: Wel jammer dat de prijs niet onder 22 eu is. Wanneer je besteld altijd een extra opmerking toevoegen dat je een EU versie wilt hebben en dan blijft er voldoende ruimte over voor overige verzoekjes
-
Ja, deze wordt ondersteunt door de Neo app en driver. Ik zie dat ik de beschrijving wel nog even aan moet passen; "supported devices with ALL parameters" PS. It's Neo Coolcam..
-
@chico alternatief is de Remotec Scene Master die 8 Fibaro buttons vervangt en met een appart bracket bijna onzichtbaar opgehangen (geschroefd / tape) kan worden...
-
@erictks the information provided on their own site is insufficient to check how the app of driver needs to be setup (to support your request). I really need a manual that describes the way how they implemented Z-wave command classes and in particu…
-
@Wimstradamus the information is contradicting each other. If you check the manufacturers own site, it shows on the official product pictures "temperature sensing"... I am awaiting to receive the PD02 to check it myself... and adapt the driver if …
-
Indeed an app and driver is most likely missing and the device does not support BASIC CC. @bvdbos the Remotec is not a good example, since this switch is having actual loads connected to it. @erictks do you have a link to the documentation of this…
-
@joolee I expect to receive my Mi smart home set early next week. 1.4.0-alpha.2 has been released to Development-Preview and installed on my Homey... will start looking into a Mi Zigbee app once the set arrives...
-
@MbenzNo No you don't need to de-install the previous version of the app before doing a CLI install of the new version. I think the Philio sensor was still included as basic / unknown device. Can you try, with 1.0.20 installed, to remove the devic…
-
I've added support for the following sensors in the Philio app: * PAT02-1A Flood Multisensor * PAT02-1B Temperature and Humidity sensor * PAT02-1C Flood sensor The update is located at my forked Philio github repository: https://github.com/TedTo…
-
Richy said: No hints on how to add the RC2? Well if you insist... #FridayEvening I guess a driver needs to be made for the RC2.. the hints / options I see: 1. Make the driver yourself. Start at developers.athom.com and peek at compar…
-
@jesper about which device are you referring to and which software and app version? Can you check the node ID of the device and post a section of the Z-wave log of this Node ID (filtered) when you switch on / off and dim the device?
-
Mod break: Verplaatst naar Nederlands sectie
-
@Taxandria I'm not sure if the bridge of these sensors is accessible through the miIO library. I've ordered one set and will have a look once Homey 1.4 enables Zigbee if it is possible to create a driver to communicate directly with these sensors (…
-
@MrDutchfighter my Neo's have a better battery life time compared to my Fibaro motion sensors.... In addition, it depends on the amount and frequency of reporting of e.g. light intensity and temperature....