This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
MennoVanGrinsven
About
- Username
- MennoVanGrinsven
- Joined
- -
- Visits
- 1,010
- Last Active
- Roles
- Member
Comments
-
@rvmourik your switch is a transmitter . So you can use it to start a flow. If you want to switch on/off a light , you also need a receiver like a ACM-1000, AWMD-250. These you can control through your mobile app. So with the transmitter you can t…
-
@phb plex works fine when you remove the capabilities in de app.json
-
@MrDutchfighter are you in the athom slack? If not please do. I had a chat with athom about this and we can get some help there if we need to.
-
@MrDutchfighter I was thinking about starting also with the itho app. I was looking at this https://github.com/xs4free/Itho-library/ In the c include file there are all the codes that need to be send. Also there is a join and leave function. So y…
-
One thing is for sure. It will not be stable today.
-
@superice I often use a VPN connection to my Bo e network. Is it possible to add a check to (optionally) check if the phone is on the same subnet as homey is? Typically VPN connections are on a seperate subnet and have a seperate IP range from wher…
-
As far as I understood it is more of a bugfix release .
-
phb said: @MennoVanGrinsven ok have done some tests and here the plex-chromecast app crashes invalid_capability If you want you can try this https://github.com/scanno/nl.kikkert.plex
-
phb said: @MennoVanGrinsven After update to 0.9.1 reinstalled plex app v1.1.0 and chromcast v0.11.2 .Still testing but i can stream a movie. ok i got an error when installing plex after a full reset. i got the invalid_capabilities me…
-
phb said: @MennoVanGrinsven chromecast works and i can stream content with the plain plex app or did you make the changes to app.json (or cloned my fork)?
-
phb said: I'm not happy with this update... no fibaro sensors , pioneer and chromecast,and because no chromecast also plex doesn't work.... Chromecast works now and I got Plex to work (at least no capabilities error when adding the plex…
-
RobertLijkendijk said: MennoVanGrinsven said: @RobertLijkendijk git submodule update —init If you are using git No I am not, just downloaded the Greenwave app as .zip file and used the athom-cli to install it to my Homey. Are…
-
@RobertLijkendijk git submodule update —init If you are using git Otherwise download also the homey-wave driver drop their github and put it in the node_modules directory
-
RobertLijkendijk said: MennoVanGrinsven said: RobertLijkendijk said: I am unable to install the greenwave app on my Homey running 0.9.1.... I thought z-wave apps where developed for use from version 0.9.1? install the…
-
RobertLijkendijk said: @MennoVanGrinsven cool, I'll give that a try tonight! Can you also get power measurements from the Node6 using the ap?? I've got 3 powernodes 6 and 3 powernodes 1 so really want to give this app a go Yeah I thin…
-
@MarcoWijk that i get a stack overflow when KaKu tries to transmit a signal does not mean that there are different hardware revisions. First it means that that specific situation has not occured during testing. There are so many variables to take in…
-
tim1990 said: @MennoVanGrinsven So it's a firmware or App problem? Hope it is. Because this way my Homey isn't worth much. And i hate it to give up! firmware problem
-
@tim1990 i have problems with kaku switching pairing works, but actual switching does not. I had a debug session with athom and it seems that when homey transmits, the process crashes (stack overflow). so the cause is found (at least in my situation…
-
@tim1990 you only have problems with switching Kaku in flows or also switching Kaku in general?
-
RobertLijkendijk said: I am unable to install the greenwave app on my Homey running 0.9.1.... I thought z-wave apps where developed for use from version 0.9.1? install the greenwave app manually. download it from github and modify the …
-
tim1990 said: I do think that they already know! But i'm willing to do it. But where did you posted the issue? https://github.com/athombv/homey/issues/729
-
tim1990 said: None of my KAKU is working! for 2 month now. copy the remote works for pairing but switching won't. Generating isn't working at all. So you also have the same problem for the same amount of time. Perhaps you can add a comme…
-
I have my (in wall) dimmers paired to a Kaku remote and use the copy signal procedure. So no need to repair the dimmer itself. Besides repairing them by removing them from the wall is a bit of a job. That is why I have them paired to a remote.
-
Is there going to be a Linux version of the app?
-
@jjtbsomhorst here no apps installed (did a reset ) only app installed is the Kaku app. My dimmer is in the same room. Not working .
-
@Reemster well I did a factory reset twice and still Kaku is not working. I
-
mranderson said: I've struggeled for quite som time now with my Nexa sockets and doorbell, and still no luck with 0.91. When pairing the socket/doorbell (copying signal from remote/doorbell), the signal is recognized by Homey, but the Nexa devi…
-
Bij mij werkt Kaku al weken niet meer.
-
@Bumblez nice quote, but I have been without Kaku for 8 weeks now. First the solution would be the new Kaku app. That was not the solution . Then the solution was that 0.9.x would solve my problem for sure. It did not.
-
RobinVanKekem said: MennoVanGrinsven said: I really wish athom would finally release a working KaKu app. My AWMR-230 and AWMD-250 are still not working. Now even Chromecast is broken. I was pretty happy up to firmware 0.8.35. KaKu was …