This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Jerryvdv
About
- Username
- Jerryvdv
- Joined
- -
- Visits
- 436
- Last Active
- Roles
- Member
Comments
-
I'm curious about what your experiences are with Nuki as it seems one of the better options out there (if you don't feel like changing all the cilinders). Keep us updated!
-
@RobinVanKekem first off great work on the app. Second; I have a request, can you make 2 more additional (IF) cards? If 'UV changed' and if 'Wind speed changed' ? I would like to use these triggers (and underlying values) in a flow.
-
I would imagine each and every device that can 'dim'. Devices are pretty subjective as each of us have different configurations. Personally, I only have dimmable KAKU devices at the moment as I'm waiting (hoping) on z-wave dimmers that can be us…
-
@KoenMartens any idea which release it will be incorporated in?
-
@Caligula Dit kan je doen door ze individueel aan te melden (dus koppelen via de optie genereer signaal). Na toevoegen kun je aangeven wat er op is aangesloten (b.v. een lamp).
-
Good alternative for the moment is using IFTTT triggers.
-
I have severals AWMD-250's. After adding these with the new drivers the dimming function is not working properly anymore in flows. When I set the the dimmer to 70% the following happens: 1) The lights turn on, on 100% 2) The lights dim to 70% (so …
-
I posted this in the library thread as well, but I suppose it also has a place in this thread: One of my favourite flows, mainly because some of the family members are otherwise unable to interact with Homey , is for providing spoken feedback after …
-
One of my favourites, mainly because some of the family members are otherwise unable to interact with Homey , is for providing spoken feedback after talking to Homey. What the following flow does is say either say a standard prase (in my case "Sorry…
-
@Robin Would love an update or an estimation.. i.e. If I know it's going to take a few more weeks, no problem.. In that case I'll go ahead and perform a manual install.
-
DaneeDeKruyff said: Edit: Yes, it does work for me on the USB powered sensor. Nice find, I am indeed only on USB powered devices.
-
I have configured variable 111 as follows: 111,4,300 - this leads to a update of luminance every 5 minutes. Also I have had enabled the selective reporting with: 40,1,1 (to enable this reporting) and 43,2,25 which sends a report if the difference…
-
BasPost said: I have Dutch Ruben with speed "Slow" and it works perfect! Very happy with this setting. I would suggest to do a powercycle Same here, works like a charm.
-
caseda said: @Jerryvdv ; You can still change the parameters with flows if you really need/want to, see my post(s): https://forum.athom.com/discussion/comment/22068/#Comment_22068 Thanks, will use that for now! Good news the byte bug …
-
Taco said: @Jerryvdv Could you reproduce the error and send a log? @Taco Sure can: 0D6B13D2CC
-
Am on .34 so far no luck of changing the parameters; I'm getting a " Cannot read property 'id' of undefined " error message when I try to save my settings. Will try to re-add the sensor tomorrow, see if it will help.
-
Jon said: Okay, so I don't understand yet how to program a deviation of - let's say - minus 3.4 degrees. What do I put behind the 201,.... and more important: how do I calculate this myself. In your case, minus 3.9 degrees ended up in 201,1,216…
-
Thanks for the update! Looking forward to .33
-
TedTolboom said: Just to check: Did you save the settings on the device card > manual wakeup of the sensor > reboot of Homey > no results in insights after 2-3x 21 minutes? Yes I did, no results.. Reporting only done every hour. If I…
-
TedTolboom said: @DaneeDeKruyff Can you try to set is at a value of e.g. 10? Which most likely corresponds to an update interval of 42 minutes (2550 seconds) Hi Ted, I have changed it to 5 (apparently the min. value for 111 according to…
-
@TedTolboom Yes, I have. This morning showed no results, hence I performed a reboot of Homey just to be sure.. Sadly no results.
-
DaneeDeKruyff said: @Jerryvdv ;;Did you get any result from setting 43,2,10? I've tested with that too, but it didn't work for me. No results here. TedTolboom said: @Jerryvdv and @DaneeDeKruyff did any one of you test to set a pa…
-
TedTolboom said: @Jerryvdv Which FW and which settings (specifically what is the lowest value) have you tried? Hi Ted, I'm on 0.8.32 and have the current settings: 5,1,2;3,2,10;40,1,1;43,2,10;101,4,241;111,4,600 I have tried 6…
-
DaneeDeKruyff said: It should work by setting the following parameter: 111,4,1800 AND setting the z-wave wakeup interval at 1800. Not sure I've tested this yet on 0.8.32 but I tested it on 0.8.30 and got a report every half hour. Thanks …
-
Did anyone figure out how to increase the reporting time? I am not able to get it reporting more than once an hour.
-
That sucks Bas.. For the others, the Aeotec Multi Sensors are 48 euro's again: http://www.amazon.de/Aeotec-Multi-Sensor-ZW100-C-Z-Wave-Plus/dp/B0141FQDJQ?SubscriptionId=AKIAJ7T5BOVUVRD2EFYQ&tag=camelcamelc06-21&linkCode=xm2&camp=2025&a…
-
DaneeDeKruyff said: That is the right procedure. Do you see the spinning circle in the dialog? (Do you use Chrome?) How close do you hold the sensor when pairing it? I hold it as close as possible. After a hard reset Homey was able to …
-
This is my first Z-Wave device. However, it seems that my Homey does not add any Z-wave device (perhaps I'm doing something wrong) - v.8.30: I press 'add device' under the 'zones & devices menu' after which a empty screen pops up with the tit…
-
HrDolfsma said: I will reset the homey and see if it will connect to wifi and register with the firewall rule for blocking google DNS disabled. Give me a minute.... Have reset the homey and re-ran the installation procedure. Both times it said…
-
Same here. Android AP is working, iOS not.